OEMSETNT.INF Driver File Contents (cb4_22a_disco_1.zip)

;----------------------------------------------------------------------------
;
; KTCCB4N3.INF NDIS3 configuration file for Windows NT 3.51/4.0 
; Kingston EtheRx CardBus 10/100 Fast Ethernet adapter (KNE-CB4TX)
; 11/16/98  V2.00
;  
;----------------------------------------------------------------------------

[Identification]
    OptionType = NetAdapter

[PlatformsSupported]
    ISA
    EISA
    MCA
    PCI

[Options]
    KTC 

[OptionsTextENG]
    KTC = "Kingston EtheRx CardBus 10/100 Fast Ethernet adapter (KNE-CB4TX)"

[AllFileConstants]
GenericInfVersion       = " V2.00"
UtilityInf              = "UTILITY.INF"
ParamInf                = "NCPARAM.INF"
subroutineinf           = "SUBROUTN.INF"
SoftwareType            = "driver"
Exit_Code               = 0
NetEventDLL             = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL             = "%SystemRoot%\System32\IoLogMsg.dll"
Manufacturer            = "Kingston"
DISABLEPCMCIASYS        = "0"			; "1"

[FileConstants-KTC]
GenericAdapterName      = "Kingston EtheRx CardBus 10/100 Fast Ethernet adapter"
GenericTitleName        = "KNE-CB4TX CardBus PC Card"
GenericDriverName       = "Kingston EtheRx CardBus 10/100 Fast Ethernet adapter"
GenericSysName          = "KTCCB4N3.SYS"
GenericName             = "KTCCB4N3"
ProductMajorVersion     = "2"
ProductMinorVersion     = "00"
ProductVersion          = $(ProductMajorVersion)"."$(ProductMinorVersion)
ProductSoftwareName     = "KTCCB4N3"
ProductSoftwareDesc     = "Kingston EtheRx CardBus 10/100 Fast Ethernet adapter"
ProductSoftwarePath     = "\SystemRoot\System32\drivers\"$(GenericSysName)
NetRuleSoftwareType     = "ktccb4n3Sys ndisDriver ktccb4n3Driver"
NetRuleSoftwareUse      = $(SoftwareType)
NetRuleSoftwareBindForm = """ktccb4n3Sys"" yes no container"
NetRuleSoftwareClass    = {"ktccb4n3Driver basic"}
NetRuleSoftwareBindable = {"ktccb4n3Driver ktccb4n3Adapter non exclusive 100"}
ProductHardwareName     = "KTCCB4N3"
ProductHardwareDesc     = "Kingston EtheRx CardBus 10/100 Fast Ethernet adapter"
NetRuleHardwareType     = "KTCCB4N3 ktccb4n3Adapter"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass    = {"ktccb4n3Adapter basic"}

ProductKeyName          = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName            = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"

VERS1Manufacturer       = "Kingston"
VERS1Product            = "EtheRx CardBus 10/100 Fast Ethernet adapter"  
VERS1Type               = "KNECB4TX-10/100"
PCMCIA                  = 0

[GeneralConstants]
From            = ""
To              = ""
ExitCodeOk      = 0
ExitCodeCancel  = 1
ExitCodeFatal   = 2
KeyNull         = ""
MaximumAllowed  = 33554432
RegistryError   = NO_ERROR
KeyProduct      = ""
KeyParameters   = ""
TRUE            = 1
FALSE           = 0
NoTitle         = 0
ExitState       = "Active"
OldVersionExist = $(FALSE)
DriverPath      = $(!STF_NTPATH)\drivers

[date]
; Now is a list which contains { Sec From 1-1-1970, Year, Month, Day, Hour,
; Minute, Second }
Now = {} ? $(!LIBHANDLE) GetSystemDate

;---------------------------------------------------------------------------
; 1. Identify
;
; DESCRIPTION:   To verify that this INF deals with the same type of options
;                as we are choosing currently.
;
; INPUT:         None
;
; OUTPUT:        $($R0): STATUS: STATUS_SUCCESSFUL
;                $($R1): Option Type (COMPUTER ...)
;                $($R2): Diskette description
;---------------------------------------------------------------------------

[Identify]
    read-syms Identification
    set Status     = STATUS_SUCCESSFUL
    set Identifier = $(OptionType)
    set Media      = #("Source Media Descriptions", 1, 1)
    Return $(Status) $(Identifier) $(Media)

;------------------------------------------------------------------------
; 2. ReturnOptions:
;
; DESCRIPTION:   To return the option list supported by this INF and the
;                localised text list representing the options.
;
;
; INPUT:         $($0):  Language used. ( ENG | FRN | ... )
;
; OUTPUT:        $($R0): STATUS: STATUS_SUCCESSFUL |
;                                STATUS_NOLANGUAGE
;                                STATUS_FAILED
;                                STATUS_NOTSUPPORTED
;                $($R1): Option List
;                $($R2): Option Text List
;------------------------------------------------------------------------

[ReturnOptions]
    set Status          = STATUS_FAILED
    set OptionList      = {}
    set OptionTextList  = {}

    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) in $(LanguageList)
        ifstr(i) $($1) == ""
            goto returnoptions
        endif
        set PlatformList = ^(PlatformsSupported, 1)
        Ifcontains(i) $($1) in $(PlatformList)
            goto returnoptions
        else
            set Status = STATUS_NOTSUPPORTED
            goto finish_ReturnOptions
        endif
    else
        set Status = STATUS_NOLANGUAGE
        goto finish_ReturnOptions
    endif

returnoptions = +
    set OptionList     = ^(Options, 1)
    set OptionTextList = ^(OptionsText$($0), 1)
    set Status         = STATUS_SUCCESSFUL

finish_ReturnOptions = +
    Return $(Status) $(OptionList) $(OptionTextList)

;------------------------------------------------------------------------
; InstallOption:
;
;      This section is shelled to by main installation processing
;      or by NCPASHEL.INF during reconfig, removal, update, etc.
;
; FUNCTION:  To copy files representing Options
;            To configure the installed option
;            To update the registry for the installed option
;
; INPUT:     $($0):  Language to use
;            $($1):  OptionID to install
;            $($2):  SourceDirectory
;            $($3):  AddCopy  (YES | NO)
;            $($4):  DoCopy   (YES | NO)
;            $($5):  DoConfig (YES | NO)
;
; OUTPUT:    $($R0): STATUS: STATUS_SUCCESSFUL |
;                            STATUS_NOLANGUAGE |
;                            STATUS_USERCANCEL |
;                            STATUS_FAILED
;------------------------------------------------------------------------

[InstallOption]
    set Status   = STATUS_FAILED

    set Option   = $($1)
    set SrcDir   = $($2)
    set AddCopy  = $($3)
    set DoCopy   = $($4)
    set DoConfig = $($5)

    Set !DebugOutputControl = 1
    Debug-Output "OEMSETNT.INF: InstallOption"

    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) NOT-IN $(LanguageList)
        Return STATUS_NOLANGUAGE
    endif

    set-subst LF = "\n"
    read-syms GeneralConstants
    read-syms AllFileConstants
    read-syms FileConstants"-"$(Option)
    read-syms DialogConstants$(!STF_LANGUAGE)"-"$(Option)
    ifstr(i) $(!NTN_Origination) == "NCPA"
        set Continue = $(OK)
    endif

    read-syms AllFileConstants$(!STF_LANGUAGE)
    read-syms FileConstants$(!STF_LANGUAGE)"-"$(Option)

    detect date
    set-title  $(FunctionTitle)
    set To   = Begin
    set From = Begin
    set CommonStatus = STATUS_SUCCESSFUL
    EndWait

Begin = +
    Set ActivateDetection = FALSE

    Ifstr(i) $(!NTN_InstallMode) == deinstall
        set StartLabel = removeadapter
    else-Ifstr(i) $(!NTN_InstallMode) == Update
        set StartLabel = UpgradeSoftware
    else-Ifstr(i) $(!NTN_InstallMode) == bind
        set StartLabel = bindingadapter
    else-Ifstr(i) $(!NTN_InstallMode) == configure
        set StartLabel = configureadapter
        Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
            Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
            endif
            set Error = $($R0)
            set From = end
            set To = end
            goto nonfatalinfo
        endif
    else
        set StartLabel = installadapter
        set OEM_ABANDON_OPTIONS = {}
        set OEM_ABANDON_SOFTWARE = FALSE
        set OEM_ABANDON_ON = TRUE
    endif

    ; Set the Default values
    set IRQValue            = *($(IRQList), 6)             ; IRQ Level = 10
    set IOBaseAddrValue     = *($(IOBaseAddrList), 11)     ; IOBase Address = 0x6000
    set MemoryAddrValue     = *($(MemoryAddrList), 17)     ; Memory Address = 0xD0000
    set TransmitBuffersValue = *($(TransmitBuffersList), 2) ; TransmitBuffers = 16 
    set ReceiveBuffersValue  = *($(ReceiveBuffersList), 2) ; ReceiveBuffers = 16 

    Set From = $(fatal)
    Set To = $(fatal)
    Goto $(StartLabel)

;-----------------------------------------------
; Installation Section
;-----------------------------------------------

installadapter = +
    ; Check whether the same version of the software exists
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MaximumAllowed) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
        ; Same version already existed in the local machine
        ; Popup the dialog and ask the user whether he wants to continue
        CloseRegKey $(KeyProduct)
        ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
           Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
               $(ProductVersion)
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
               Debug-Output "ShellCode error: cannot get an error string."
               goto ShellCodeError
           endif
           goto end
        else
           ; Add a new adapter card?
           Shell $(UtilityInf), CardExistedDlg
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
               Debug-Output "ShellCode error: cannot get an error string."
               goto ShellCodeError
           endif
           ifstr(i) $($R1) != "OK"
               goto end
           endif
           set OldVersionExist = $(TRUE)
        endif
    endif

    ; DLL load addition
    Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) NO
    Ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Goto ShellCodeError
    Else-Ifstr(i) $($R0) == STATUS_FAILED
        Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
        Goto fatal
    Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
        Goto successful
    Endif

    Set SrcDir = $($R1)
    install "Install-Dll"
    goto adaptersetup

;-----------------------------------------------
; Configuration Section
;-----------------------------------------------

; Get the current values of all the parameters
configureadapter = +
    Ifstr $(KeyProduct) == $(KeyNull)
        OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MaximumAllowed) KeyProduct
        Ifstr $(KeyProduct) == $(KeyNull)
            set RegistryError = CANNOT_FIND_COMPONENT_SERVICE
            Debug-Output "Cannot find component product key"
            goto fatalregistry
        Endif
    Endif

    ; Get the other parameters; they're attached to the service parameters key
    Debug-Output "INF: Shelling to FindService"
    Shell $(UtilityInf) FindService, $(KeyProduct)
    Ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "INF: FindService shell failure"
        Goto ShellCodeError
    Endif
    Ifstr(i) $($R0) != NO_ERROR
        Debug-Output "INF: FindService Shell error: "$($R0)
        Goto fatalregistry
    endif

    Set KeyParameters = $($R2)
    CloseRegKey $($R1)

    Ifstr $(KeyParameters) == $(KeyNull)
        set RegistryError = CANNOT_FIND_COMPONENT_SERVICE
        Debug-Output "Cannot find component service"
        goto fatalregistry
    endif

    set OldVersionExist = $(TRUE)
    set ValueName = ""
    set ValueData = ""
    set ValueStr  = ""
    set ValueList = {}
     
    ; Get the old values from the Registry [Get Values]
    EnumRegValue $(KeyParameters) ValueList
    ForListDo $(ValueList)
        set ValueItem = $($)
        set ValueName = *($(ValueItem),1)
        set ValueData = *($(ValueItem),4)
        ifstr(i) $(ValueName) == "IoBaseAddress"
             set IOBaseAddrIndex = $(ValueData)
        else-ifstr(i) $(ValueName) == "MemoryMappedBaseAddress"
             set MemoryAddrIndex = $(ValueData)
        else-ifstr(i) $(ValueName) == "InterruptNumber"
             set IRQValueIndex = $(ValueData)
        else-ifstr(i) $(ValueName) == "ReceiveBuffers"
             set ReceiveBuffersIndex = $(ValueData)                
        else-ifstr(i) $(ValueName) == "TransmitBuffers"
             set TransmitBuffersIndex = $(ValueData)
        endif
    EndForListDo

    set IRQValue = *($(IRQList), ~($(IRQValues),$(IRQValueIndex)))
    ifstr(i) $(IRQValue) == ""
        set IRQValue = *($(IRQList), 2)
    endif

    set MemoryAddrValue = *($(MemoryAddrList), ~($(MemoryAddrValues),$(MemoryAddrIndex)))
    ifstr(i) $(MemoryAddrValue) == ""
        set MemoryAddrValue = *($(MemoryAddrValues), 21)
    endif

    set IOBaseAddrValue = *($(IOBaseAddrList), ~($(IOBaseAddrValues),$(IOBaseAddrIndex)))
    ifstr(i) $(IOBaseAddrValue) == ""
        set IOBaseAddrValue = *($(IOBaseAddrList), 1)
    endif

   set ReceiveBuffersValue = *($(ReceiveBuffersList), ~($(ReceiveBuffersValues),$(ReceiveBuffersIndex)))
    ifstr(i) $(ReceiveBuffersValue) == ""
        set ReceiveBuffersValue = *($(ReceiveBuffersValues), 0)
    endif

    set TransmitBuffersValue = *($(TransmitBuffersList), ~($(TransmitBuffersValues),$(TransmitBuffersIndex)))
    ifstr(i) $(TransmitBuffersValue) == ""
        set TransmitBuffersValue = *($(TransmitBuffersValues), 0)
    endif

adaptersetup = +
    Set From = adapteroptions

adapteroptions = +
    LoadLibrary "disk 1" $(DialogDllName) hLib
    read-syms FileDependentDlg$(!STF_LANGUAGE)"-"$(Option)
    set ENABLER = 0

    ui start "InputDlg" $(hLib)
    set ExitButton = $(ButtonPressed)
    FreeLibrary $(hLib)

    ifstr(i) $(DLGEVENT) == "CONTINUE"
        set IOBaseAddrIndex      = $(Combo1Out)
        set MemoryAddrIndex      = $(Combo2Out)
        set IRQValueIndex        = $(Combo3Out)
        set ReceiveBuffersIndex  = $(Combo4Out)
        set TransmitBuffersIndex = $(Combo5Out)
        set ExitButton           = $(ButtonPressed)
        ui pop 1
    else-ifstr(i) $(DLGEVENT) == "EXIT"
        set CommonStatus = STATUS_USERCANCEL
        ui pop 1
        goto end
    else
        set CommonStatus = STATUS_USERCANCEL
        ui pop 1
        Debug-Output "Action: unknown. Bye."
        goto end
    endif

; If installing, go create the necessary keys;
; if configuring, they're already open.
skipoptions =+
    ifint $(OldVersionExist) == $(TRUE)
        ifstr(i) $(!NTN_InstallMode) == configure
            goto writeparameters
        endif
    endif
    StartWait

    ; Add Software Component
    ifint $(OldVersionExist) == $(FALSE)
        ifstr(i) $(!NTN_InstallMode) == "install"
           Ifstr(i) $(DoCopy) == "YES"
              Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
              Ifint $($ShellCode) != $(!SHELL_CODE_OK)
                  Goto ShellCodeError
              Else-Ifstr(i) $($R0) == STATUS_FAILED
                  Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
                  ifint $($ShellCode) != $(!SHELL_CODE_OK)
                      goto ShellCodeError
                  endif
                  set Error = $($R0)
                  Goto fatal
              Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
                  Goto successful
              Endif
              Set SrcDir = $($R1)
           Endif
           install "Install-Option"
           ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
              Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
              ifint $($ShellCode) != $(!SHELL_CODE_OK)
                  goto ShellCodeError
              endif
              set Error = $($R0)
              goto fatal
           endif
        endif

        Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), +
            $(ProductSoftwareName), +
            $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +

            $(ProductSoftwarePath), "kernel", "NDIS", {}, "",+
            $(NetEventDLL)

        Set OEM_ABANDON_SOFTWARE = TRUE
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "ShellCode error"
            goto ShellCodeError
        endif

        ; $R1 contains the product version key handle
        ; $R2 contains the NetRules subkey handle
        ; $R3 contains the new Services key handle
        ; $R4 contains the Parameters key
        ; $R5 contains the Linkage Key
        set RegistryError = $($R0)
        set KeyProduct      = $($R1)
        Set SoftNetRulesKey = $($R2)
        CloseRegKey $($R3)
        CloseRegKey $($R4)
        CloseRegKey $($R5)

        Ifstr(i) $(RegistryError) != NO_ERROR
            EndWait
            Debug-Output "Registry error: add software components"
            CloseRegKey $(KeyProduct)
            CloseRegKey $(SoftNetRulesKey)
            goto fatalregistry
        endif

        set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
                           {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
                           {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
                           {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
                           {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDesc)},+
                           {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
                           {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}

        Shell  $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "ShellCode error."
            goto ShellCodeError
        endif

        set RegistryError = $($R0)

        Ifstr(i) $(RegistryError) != NO_ERROR
            EndWait
            Debug-Output "Registry error: add value list."
            CloseRegKey $(KeyProduct)
            CloseRegKey $(SoftNetRulesKey)
            goto fatalregistry
        endif

        set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
                            {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
                            {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
                            {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
                            {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
                            {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}

        Shell  $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "ShellCode error."
            goto ShellCodeError
        endif

        set RegistryError = $($R0)

        CloseRegKey $(KeyProduct)
        CloseRegKey $(SoftNetRulesKey)

        Ifstr(i) $(RegistryError) != NO_ERROR
            EndWait
            Debug-Output "Resgitry error: add value list."
            goto fatalregistry
        endif
    endif

    ; Create the HARDWARE\Netcard region and its corresponding service
    Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
    ifint $($R4) != -1
        Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
    endif

    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "Cannot add hardware component"
        goto ShellCodeError
    endif

    set RegistryError = $($R0)
    Ifstr(i) $(RegistryError) != NO_ERROR
        EndWait
        Debug-Output "Registry error: add hardware component"
        CloseRegKey $($R1)
        CloseRegKey $($R2)
        CloseRegKey $($R3)
        goto fatalregistry
    endif

    ; $R1  Registry key variable for HARDWARE\Netcard\(n)
    ; $R2  Registry key variable for HARDWARE\Netcard\(n)\\NetRules
    ; $R3  Registry key handle for <service>\Parameters key
    ; $R4  Adapter number assigned to adapter
    ; $R5  Service name generated by combining svc name with adapter number
    set KeyParameters = $($R3)
    set KeyAdapterRules = $($R2)
    set AdapterNumber = $($R4)

    set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
                       {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardwareTitle)},+
                       {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareDesc)},+
                       {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
                       {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
                       {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}

    Shell  $(UtilityInf), AddValueList, $($R1), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "ShellCode error"
        goto ShellCodeError
    endif
    CloseRegKey $($R1)

    set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
    set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)

    set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
                        {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
                        {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
                        {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}

    Shell  $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "ShellCode error."
        goto ShellCodeError
    endif

    set RegistryError = $($R0)

    Ifstr(i) $(RegistryError) != NO_ERROR
        EndWait
        Debug-Output "Resgitry error: add value list."
        CloseRegKey $(KeyParameters)
        CloseRegKey $(KeyAdapterRules)
        goto fatalregistry
    endif

    CloseRegKey $(KeyAdapterRules)
    goto writeparameters

; REQUIRED: $(KeyParameters) contains service Parameters key handle
writeparameters = +
    Shell $(UtilityInf), GetBusTypeNum
    set BusTypeNum = $($R1)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "ShellCode error."
        goto ShellCodeError
    endif

    ; Add the rest of the parameters to the Services area
    Debug-Output "OEMSETNT.INF: - Create Driver Parameters"
    set MemoryAddrValue     = *($(MemoryAddrValues),~($(MemoryAddrList), $(MemoryAddrIndex)))
    set IRQValue            = *($(IRQValues), ~($(IRQList), $(IRQValueIndex)))
    set IOBaseAddrValue     = *($(IOBaseAddrValues),~($(IOBaseAddrList), $(IOBaseAddrIndex)))
    set ReceiveBuffersValue = *($(ReceiveBuffersValues), ~($(ReceiveBuffersList), $(ReceiveBuffersIndex)))
    set TransmitBuffersValue = *($(TransmitBuffersValues), ~($(TransmitBuffersList), $(TransmitBuffersIndex)))
    set IOLengthValue       = 128
    set NewValueList        = {{IoBaseAddress, $(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)},+
                              {IoLength, $(NoTitle),$(!REG_VT_DWORD), 128},+
                              {MemoryMappedBaseAddress, $(NoTitle),$(!REG_VT_DWORD),$(MemoryAddrValue)},+
                              {MemoryMappedSize, $(NoTitle),$(!REG_VT_DWORD),4096},+
                              {InterruptNumber, $(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+
                              {TransmitBuffers, $(NoTitle),$(!REG_VT_DWORD),$(TransmitBuffersValue)},+
                              {ReceiveBuffers, $(NoTitle),$(!REG_VT_DWORD),$(ReceiveBuffersValue)},+
                              {MediaType, $(NoTitle),$(!REG_VT_DWORD),1},+
                              {BusType, $(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
                              {BusNumber, $(NoTitle),$(!REG_VT_DWORD),0},+
                              {AdapterType, $(NoTitle),$(!REG_VT_DWORD),0},+
                              {PCMCIA, $(NoTitle),$(!REG_VT_DWORD),0},+
                              {DriverType,$(NoTitle),$(!REG_VT_DWORD),1},+
                              {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
                              {NwayProtocol,$(NoTitle),$(!REG_VT_DWORD),1},+
                              {PlatformType,$(NoTitle),$(!REG_VT_DWORD),1}}

    Shell  $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
    CloseRegKey $(KeyParameters)

    ifint $(DISABLEPCMCIASYS) == 1
        set PCMCIAKeyName = $(!NTN_ServiceBase)"\Pcmcia"
        OpenRegKey $(!REG_H_LOCAL) "" $(PCMCIAKeyName) $(MaximumAllowed) PCMCIAKey
        SetRegValue $(PCMCIAKey) {Start, 0, $(!REG_VT_DWORD),4}  ; '4' disables the driver
        CloseRegKey $(PCMCIAKey)
    endif
     
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "ShellCode error."
        goto ShellCodeError
    endif

    set RegistryError = $($R0)

    Ifstr(i) $(RegistryError) != NO_ERROR
        Debug-Output "Registry error: Add value list"
        goto fatalregistry
    endif
    EndWait

    goto successful

;-----------------------------------------------
; Binding section
;-----------------------------------------------

bindingadapter =+
    set Error = "Binding: Sorry, not yet implemented."
    goto fatal

;-----------------------------------------------
; Removeadapter section
;-----------------------------------------------

removeadapter = +
    Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
        ; Remove Software Component
        Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareName)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "ShellCode error"
            goto ShellCodeError
        endif
        set RegistryError = $($R0)
        Ifstr(i) $(RegistryError) != NO_ERROR
            goto fatalregistry
        endif
    else
        Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), $(!NTN_RegBase)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "ShellCode error"
            goto ShellCodeError
        endif
        set RegistryError = $($R0)
        Ifstr(i) $(RegistryError) != NO_ERROR
            goto fatalregistry
        endif
    endif
    ifint $(DISABLEPCMCIASYS) == 1
        set PCMCIAKeyName = $(!NTN_ServiceBase)"\Pcmcia"
        OpenRegKey $(!REG_H_LOCAL) "" $(PCMCIAKeyName) $(MaximumAllowed) PCMCIAKey
        SetRegValue $(PCMCIAKey) {Start, 0, $(!REG_VT_DWORD),0}  ; '0' restores the driver to "BOOT"
        CloseRegKey $(PCMCIAKey)
    endif
    goto end

;-----------------------------------------------
; Upgrade Software section
;-----------------------------------------------

UpgradeSoftware = +
    ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
        OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MaximumAllowed) KeyProduct
        Ifstr $(KeyProduct) != $(KeyNull)
            GetRegValue $(KeyProduct),"MajorVersion", VersionInfo
            set Version = *($(VersionInfo), 4)

            Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "ShellCode error"
                goto ShellCodeError
            endif
            set !UG_Filename = $($R0)
            ifstr(i) $(!UG_Filename) != ""
                install "Install-Update"
                ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
                    goto fatal
                endif
            endif

            SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
            SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}

            ifint $(Version) != $(ProductVersion)
                ; Do nothing for update
            endif
            CloseRegKey $(KeyProduct)
        else
            goto fatalregistry
        endif
    else
        OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) +
              $(MaximumAllowed) NetworkCardKey
        Ifstr(i) $(NetworkCardKey) != $(KeyNull)
            GetRegValue $(NetworkCardKey),"ServiceName", ServiceNameInfo
            set ServiceName = *($(ServiceNameInfo), 4)
            OpenRegKey $(NetworkCardKey) "" "NetRules" +
                $(MaximumAllowed) NetRuleKey
            Ifstr(i) $(NetRuleKey) != $(KeyNull)
                ; Make the change here
            else
                goto fatalregistry
            endif
            CloseRegKey $(NetRules)
            CloseRegKey $(NetworkCardKey)
        else
            goto fatalregistry
        endif

        OpenRegKey $(!REG_H_LOCAL) "" +
              $(!NTN_ServiceBase)"\"$(ServiceName) +
              $(MaximumAllowed) ServiceKey

        Ifstr(i) $(ServiceKey) != $(KeyNull)
            CloseRegKey $(ServiceKey)
        else
            goto fatalregistry
        endif
    endif
    goto end

successful = +
    goto end

abandon = +
    ForListDo $(OEM_ABANDON_OPTIONS)
        Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), $($)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "ShellCode error"
            goto ShellCodeError
        endif
        set RegistryError = $($R0)
        Ifstr(i) $(RegistryError) != NO_ERROR
            goto fatalregistry
        endif
    EndForListDo
    Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
        Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), FALSE
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "ShellCode error"
            goto ShellCodeError
        endif
        set RegistryError = $($R0)
        Ifstr(i) $(RegistryError) != NO_ERROR
            goto fatalregistry
        endif
    endif
    goto end

warning = +
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(to)
    else-ifstr(i) $($R1) == "CANCEL"
        goto $(From)
    else
        goto "end"
    endif

nonfatalinfo = +
    Set Severity = STATUS
    Set CommonStatus = STATUS_USERCANCEL
    goto nonfatalmsg

nonfatal = +
    Set Severity = NONFATAL
    goto nonfatalmsg

nonfatalmsg = +
    ifstr(i) $(Error) == ""
        Set Severity = NONFATAL
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(From)
    else
        goto "end"
    endif

fatalregistry = +
    Shell $(UtilityInf) RegistryErrorString $(RegistryError)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    set Error = $($R0)
    goto fatal

fataldetect = +
    Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "ShellCode error: cannot get an error string."
        goto ShellCodeError
    endif
    set Error = $($R0)
    Goto fatal

fatal = +
    ifstr(i) $(Error) == ""
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    goto setfailed

ShellCodeError = +
    set DlgType      = "MessageBox"
    set STF_MB_TITLE = $(ShellCodeErrorTitle)
    set STF_MB_TEXT  = $(ShellCodeErrorText)
    set STF_MB_TYPE  = 1
    set STF_MB_ICON  = 3
    set STF_MB_DEF   = 1
    ui start "Error Message"
    goto setfailed

setfailed = +
    set CommonStatus = STATUS_FAILED
    ifstr(i) $(OEM_ABANDON_ON) == TRUE
        set OEM_ABANDON_ON = FALSE
        goto abandon
    endif
    goto end

end = +
    goto term

term = +
    Return $(CommonStatus)

[DebugConfiguration]
    Set InfName = "OEMSETNT.INF"
    return

[Install-Option]
    set STF_VITAL = ""
    ifstr(i) $(AddCopy) == "YES"
        AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
    endif
    ifstr(i) $(DoCopy) == "YES"
        set !STF_NCPA_FLUSH_COPYLIST = TRUE
        CopyFilesInCopyList
    endif
    Exit

[Install-Update]
    set STF_VITAL = ""
    set STF_OVERWRITE = "VERIFYSOURCEOLDER"
    AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
    AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
    set !STF_NCPA_FLUSH_COPYLIST = TRUE
    CopyFilesInCopyList
    exit

[Install-Dll]
    set STF_VITAL = ""
    AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH)
    set !STF_NCPA_FLUSH_COPYLIST = TRUE
    CopyFilesInCopyList
    exit

[Source Media Descriptions]
    1  = "Kingston Setup Disk for NT"

[ProductType]
STF_PRODUCT  = Winnt
STF_PLATFORM = I386

[Files-Inf]
1, OEMSETNT.INF, SIZE=58000, RENAME=$(!UG_Filename)

[Files-Dll]
1, KTCCB4N3.DLL, SIZE=21000

[Files-KTC]
1, KTCCB4N3.SYS, SIZE=53000

[LanguagesSupported]
    ENG

[AllFileConstantsENG]
ProCaption      = "Windows NT Setup"
ProCancel       = "Cancel"
ProCancelMsg    = "Windows NT Networking is not correctly installed.  "+
                  "Are you sure you want to cancel copying files?"
ProCancelCap    = "Network Setup Message"
ProText1        = "Copying:"
ProText2        = "To:"
DialogDllName   = "KTCCB4N3.DLL"

[FileConstantsENG-KTC]
FunctionTitle           = $(GenericTitleName)" Setup"$(GenericInfVersion)
ProductSoftwareTitle    = $(GenericDriverName)
ProductHardwareTitle    = $(GenericAdapterName)
IRQList                 = ^(IRQChoices, 1)
IRQValues               = ^(IRQChoices, 2)
IOBaseAddrList          = ^(IOBaseAddrChoices, 1)
IOBaseAddrValues        = ^(IOBaseAddrChoices, 2)
MemoryAddrList          = ^(MemoryAddrChoices,1)
MemoryAddrValues        = ^(MemoryAddrChoices,2)
ReceiveBuffersList      = ^(ReceiveBuffersChoices, 1)
ReceiveBuffersValues    = ^(ReceiveBuffersChoices, 2)
TransmitBuffersList     = ^(TransmitBuffersChoices, 1)
TransmitBuffersValues   = ^(TransmitBuffersChoices, 2)

[DialogConstantsENG-KTC]
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"

[FileDependentDlgENG-KTC]
DlgType     = "RadioCombination"
DlgTemplate = "KTCCB4N3"
Caption     = $(FunctionTitle)
HelpContext = $(!IDH_DB_OEMNADE2_INS)
CBOptionsGreyed = {}
NotifyFields = {NO, NO, NO, NO, NO}

Combo1Label = "I/O Port:"
Combo2Label = "Memory Address:"
Combo3Label = "Interrupt:"
Combo4Label = "Rx Buffers:"
Combo5Label = "Tx Buffers:"

Combo1List = $(IOBaseAddrList)
Combo1Out  = $(IOBaseAddrValue)
Combo2List = $(MemoryAddrList)
Combo2Out  = $(MemoryAddrValue)
Combo3List = $(IRQList)
Combo3Out  = $(IRQValue)
Combo4List = $(ReceiveBuffersList)
Combo4Out  = $(ReceiveBuffersValue)
Combo5List = $(TransmitBuffersList)
Combo5Out  = $(TransmitBuffersValue)

ComboListItemsIn  = {Combo1List,Combo2List,Combo3List, Combo4List, Combo5List} 
ComboListItemsOut = {Combo1Out, Combo2Out, Combo3Out, Combo4Out, Combo5Out}

EditTextIn  = {"",""}
EditTextLim = {"",""}

[MemoryAddrChoices]
MA_1  = "0xC0000", 786432
MA_2  = "0xC1000", 790528
MA_3  = "0xC2000", 794624
MA_4  = "0xC3000", 798720
MA_5  = "0xC4000", 802816
MA_6  = "0xC5000", 806912
MA_7  = "0xC6000", 811008
MA_8  = "0xC7000", 815104
MA_9  = "0xC8000", 819200
MA_10 = "0xC9000", 823296
MA_11 = "0xCA000", 827392
MA_12 = "0xCB000", 831488
MA_13 = "0xCC000", 835584
MA_14 = "0xCD000", 839680
MA_15 = "0xCE000", 843776
MA_16 = "0xCF000", 847872
MA_17 = "0xD0000", 851968
MA_18 = "0xD1000", 856064
MA_19 = "0xD2000", 860160
MA_20 = "0xD3000", 864256
MA_21 = "0xD4000", 868352
MA_22 = "0xD5000", 872448
MA_23 = "0xD6000", 876544
MA_24 = "0xD7000", 880640
MA_25 = "0xD8000", 884736
MA_26 = "0xD9000", 888832
MA_27 = "0xDA000", 892928
MA_28 = "0xDB000", 897024
MA_29 = "0xDC000", 901120
MA_30 = "0xDD000", 905216
MA_31 = "0xDE000", 909312
MA_32 = "0xDF000", 913408

[IRQChoices]
IRQ_1 = "3",3
IRQ_2 = "4",4
IRQ_3 = "5",5
IRQ_4 = "7",7
IRQ_5 = "9",9
IRQ_6 = "10",10
IRQ_7 = "11",11
IRQ_8 = "15",15

[ReceiveBuffersChoices]
RXB_1 = "8", 8
RXB_2 = "16", 16 
RXB_3 = "32", 32 
RXB_4 = "48", 48 
RXB_5 = "64", 64 

[TransmitBuffersChoices]
TXB_1 = "8", 8
TXB_2 = "16", 16 
TXB_3 = "32", 32 
TXB_4 = "48", 48 
TXB_5 = "64", 64 

[IOBaseAddrChoices]
IOBase_1  = "0x1000",4096 
IOBase_2  = "0x1800",6144
IOBase_3  = "0x2000",8192 
IOBase_4  = "0x2800",10240
IOBase_5  = "0x3000",12288
IOBase_6  = "0x3800",14336
IOBase_7  = "0x4000",16384
IOBase_8  = "0x4800",18432
IOBase_9  = "0x5000",20480
IOBase_10 = "0x5800",22528
IOBase_11 = "0x6000",24576
IOBase_12 = "0x6800",26624
IOBase_13 = "0x7000",28672
IOBase_14 = "0x7800",30720
IOBase_15 = "0x8000",32768
IOBase_16 = "0x8800",34816
IOBase_17 = "0x9000",36864
IOBase_18 = "0x9800",38912
IOBase_19 = "0xA000",40960
IOBase_20 = "0xA800",43008
IOBase_21 = "0xB000",45056
IOBase_22 = "0xB800",47104
IOBase_23 = "0xC000",49152
IOBase_24 = "0xC800",51200
IOBase_25 = "0xD000",53248
IOBase_26 = "0xD800",55296
IOBase_27 = "0xE000",57344
IOBase_28 = "0xE800",59392
IOBase_29 = "0xF000",61440
IOBase_30 = "0xF800",63488
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 1.35