1. cb4_22a_disco_1.zip Driver
2. KTCHELP2.TXT File Contents

KTCHELP2.TXT Driver File Contents (cb4_22a_disco_1.zip)

Kingston Technology Company
INSTALLATION GUIDE
NDIS3/NDIS4 Driver for Windows NT
for EtheRx CardBus 10/100 Fast Ethernet Adapter
Copyright (c) 1999 Kingston Technology Company.
All Rights Reserved.
=====================================================================
 Installing the KNE-CB4TX NDIS4/3 Driver for Windows NT
=====================================================================
 Windows NT 4.0 and 3.51 do not support CardBus PC cards automatically.
 However, the KNE-CB4TX CardBus cards come with the drivers that 
 support both versions.

 I. Windows NT 4.0
=====================================================================
  1. Insert the KNE-CB4TX PC card.
  2. Click Start at the lower left corner.
  3. Choose Settings, then select Control Panel.
  4. In the Control Panel dialog box, double click the Network icon.
  5. In the Network Settings window, click Adapters.
  6. In the Network Adapters window, click Add.
  7. In the Select Network Adapter window, click Have Disk.
  8. Insert the KNE-CB4TX Drivers Diskette and click OK.
  9. From the Select OEM Option window, select Kingston EtheRx CardBus 
     10/100 Fast Ethernet adapter and click OK.
 10. Kingston EtheRx CardBus 10/100 Fast Ethernet adapter Setup screen
     appears. Click OK to save.
 11. In the Network Settings dialog box, click Close.
 12. Click Yes to reboot your computer.

 II. Windows NT 3.51
=====================================================================
  1. Insert the KNE-CB4TX PC card.
  2. Double-click Control Panel.
  3. In the Control Panel, double click the Network icon.
  4. In the Network Settings window, select Add Adapter.
  5. In the Add Adapter dialog box, scroll to select Other requires
     disk from manufacturer.
  6. Click Continue.
  7. Insert the KNE-CB4TX Drivers Diskette into the floppy drive.
     Specify the path as A:\WINNT351 and click OK.
  8. In the Select OEM Option window, click OK.
  9. Choose the Kingston EtheRx CardBus 10/100 Fast Ethernet adapter 
     from the list and click OK.
 10. Click OK to accept the default settings for the KNE-CB4TX PC card.
 11. Select the Transport Protocol.
 12. Click OK.
 13. Remove the diskette and click Restart Now.


Kingston Technology Company, EtheRx, and QStart are registered 
trademarks of Kingston Technology Company.  All others are trademarks
or registered trademarks of their respective holders.