1. sp14708.exe Driver
2. brow.txt File Contents

brow.txt Driver File Contents (sp14708.exe)

BROW - Intel PCI NIC Boot ROM/WOL Utility
====================================================================

DISCLAIMER:
-----------
Copyright (c) 1999, Intel Corporation. All rights reserved. Intel 
Corporation, 5200 NE Elam Young Parkway, Hillsboro, OR 97124-6497. 
Intel Corporation assumes no responsibility for errors or omissions in 
this document or software. Nor does Intel make any commitment to update 
the information or software contained herein. Software product is 
supplied "as is" and may not be fully functional.

Other product and corporate names may be trademarks of other companies 
and are used only for explanation and to the owners' benefit, without 
intent to infringe.


RUNNING BROW
------------

BROW.EXE can be run with any of the following command line options:


OPTIONS:
--------

   -ALL
        Selects all adapters found in system.
   -EXITCODES
        Brings up exit code help.
   -HELP or -?
        Brings up command line help.
   -NIC=XX
        Selects a specific adapter (1-8).
   -BOOTENABLE	   
   	    Enables Boot ROM.
   -BOOTDISABLE	   
        Disables Boot ROM.
   -WOLDISABLE or -WOLD
        Disables WOL bit.
   -WOLENABLE or -WOLE                              
        Enables WOL bit.
   -SETUPENABLE or -STE
        Enables Setup Menu
   -SETUPDISABLE OR -STD
        Disables Setup Menu.
   -TITLEENABLE OR -TLE
        Enables Initial Title Message.
   -TITLEDISABLE OR -TLD
        Disables Initial Title Message.
   -PROTOCOLENABLE OR -PROE
        Enables Changing the Boot Protocol Option.
   -PROTOCOLDISABLE OR -PROD
        Disables Changing the Boot Protocol Option.
   -ORDERENABLE OR -ORDE
        Enables Changing the Boot Order Option.
   -ORDERDISABLE OR -ORDD
        Disables Changing the Boot Order Option.
   -LWSENABLE OR -LWSE
        Enables Changing the Legacy OS Wakeup Support Option.
   -LWSDISABLE OR -LWSD
        Disables Changing the Legacy OS Wakeup Support Option.

EXAMPLES:
---------

Example 1:
To Disable WOL on all Intel Network Adapters, call 
BROW like this:
	BROW -ALL -WOLDISABLE 

Example 2:
To Enable WOL on a the second Intel Network Adapter 
found in your system, call BROW like this:
	BROW -NIC=2 -WOLENABLE 

Example 3:
To Disable the Boot ROM on all Intel Network Adapters, 
call BROW like this:
	BROW -ALL -BOOTDISABLE 

Example 4:
To Enable the Boot ROM on the first Intel Network Adapter 
found in your system, call BROW like this:
	BROW -NIC=1 -BOOTENABLE 

NOTE:
-----

* If you run BROW without any command line options,
  BROW will display a listing of all of the Intel
  Network adapters found in your system.

* BROW won't read/write any adapters, unless you
  specify which adapters you want to read/write to.
  You can use the -NIC=xx option to select a single 
  adapter, or user the -ALL option to select all of the
  adapters in your system.  
  

DOS ERROR CODES:
----------------
BROW returns error codes to the DOS command line, 
a description of the error codes is found below.

CODE NAME:               VALUE:
----------               ------      
SUCCESS                    0
OPERATOR TERMINATION       1
INVALID NIC                2
BAD COMMAND LINE PARAM     3
EEPROM CHECKSUM FAILURE    4
EEPROM READ FAILURE        5
EEPROM WRITE FAILURE       6
EEPROM DUMP FAILURE        7
BAD FILE                   8
NO MEMORY                  9
NO NICS FOUND              10