CLIENT32.TXT Driver File Contents (sp12779.exe)

                        3Com (R) Corporation
                    EtherDisk (R) Diskette for the
                 3C90x EtherLink 10/100 PCI NIC Family
      NetWare 4.11 on Windows 95/98 Client Driver Installation Notes

Intranetware Client Version 2.5/3.0 Installation Tips

If you have problems with the installation of Client 32, contact your 
system administrator or Novell.  3Com does not recommend installing 
the ODI 32-bit driver in Windows 95/98.

To install Intranetware Client 2.5/3.0:

1.  If you have Windows 95/98 already installed on your PC, install the 
    3C90x NIC in your system. Refer to the user guide for instructions.

2.  Follow the recommended procedure and tips for installing the NIC. 
    Make sure that you have the default services and protocols installed. 
    The necessary NDIS driver is installed in your system by default.

3.  Copy the Intranetware client installation files to your hard drive. 
    (These files are about 33MB, and can be downloaded from Novell's 
    file site.)

4.  Run SETUP.EXE from the Intranetware client install file location.
    If you have the files on CD, run the SETUP.EXE file from the 
    Intranetware client install file location on the CD.

5.  Select Typical or Custom installation, and then click Install.

6.  The installation copies all the necessary files and removes existing
    client services that are not needed. 

7.  The installation may ask for network parameter input.  Follow the 
    instructions on the screen.

8.  Reboot your system when prompted.

         (%VER CLIENT32.TXT - Installation guide v4.0.3)
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 0.68