TROUBLE.TXT Driver File Contents (3com575.exe)

3Com Corporation
3Com Megahertz 10/100 LAN CardBus PC Card (3CCFE575BT) 
Troubleshooting

If the PC Card diagnostic tests fail, 
the PC Card may not be defective.

Check the following:

1. Make sure that the  PC Card is operating in a computer 
   containing a CardBus slot.

2. Make sure that the PC Card is completely seated in its 
   slot. Review the installation instructions in the 3Com 
   Megahertz 10/100 LAN CardBus PC Card (3CCFE575BT)User Guide.

3. Make sure that your computer is running DOS 3.1 or 
   higher and that no device drivers or memory managers are 
   loaded.

4. Inspect all cables and connections.

5. If you are running the Echo Exchange test, make sure 
   that the PC Card is connected to a properly cabled 
   network and an echo server is set up on the inactive network.

6. If you are configuring the I/O base address or interrupt 
   request level make sure that the settings you select for 
   these parameters do not conflict with any other peripheral 
   or software program installed in the computer.

7. The computer in which the PC Card may be defective.  
   Install the PC Card in a known functioning computer 
   and run the tests again.

8. Replace the failed PC Card with a known working PC Card, 
   with the same configuration. If the second PC Card fails, 
   something is probably wrong with the test environment, 
   not with the PC Card.

For more troubleshooting tips, see Chapter 3 in the user guide.

(%VER  Troubleshooting v2.0)
 
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 1.67