OEMSETNT.INF Driver File Contents (ambicom.exe)

;*********************************************************************
;
; OEMSETNT.INF (NT 4.0/3.51) for AmbiCom AMB8002 Ethernet PC Card
;
;*********************************************************************
[Identification]
    OptionType = NetAdapter

[PlatformsSupported]
    ISA
    EISA
    MCA

[Options]
    AMB8002

[OptionsTextENG]
    AMB8002		    = "AmbiCom Combo Ethernet PC Card (AMB8002)"

[AllFileConstants]
    GenericInfVersion	    = "  V2.10"
    UtilityInf		    = "UTILITY.INF"
    ParamInf		    = "NCPARAM.INF"
    subroutineinf	    = "SUBROUTN.INF"
    SoftwareType	    = "driver"
    Exit_Code		    = 0
    NetEventDLL 	    = "%SystemRoot%\System32\netevent.dll"
    IoLogMsgDLL 	    = "%SystemRoot%\System32\IoLogMsg.dll"
    Manufacturer	    = "AmbiCom Inc"

[FileConstants-AMB8002]
    GenericAdapterName	    = "AmbiCom AMB8002 Ethernet PC Card"
    GenericDriverName	    = "AmbiCom AMB8002 Network Driver"
    GenericSysName	    = "AMB8002.SYS"

    ; Product Info
    ProductMajorVersion     = "2"
    ProductMinorVersion     = "10"
    ProductVersion	    = $(ProductMajorVersion)"."$(ProductMinorVersion)

    ; Software
    ProductSoftwareName     = "AMB8002"
    ProductSoftwareDesc     = "AmbiCom AMB8002 Network Driver"
    ProductSoftwareImage    = "\SystemRoot\System32\drivers\"$(GenericSysName)
    NetRuleSoftwareType     = "AMB8002Sys ndisDriver AMB8002Driver"
    NetRuleSoftwareUse	    = $(SoftwareType)
    NetRuleSoftwareBindForm = """AMB8002Sys"" yes no container"
    NetRuleSoftwareClass    = {"AMB8002Driver basic"}
    NetRuleSoftwareBindable = {"AMB8002Driver AMB8002Adapter non exclusive 100"}

    ; Hardware
    ProductHardwareName     = "AMB8002"
    ProductHardwareDesc     = "AmbiCom AMB8002 Ethernet PC Card"
    NetRuleHardwareType     = "AMB8002 AMB8002Adapter"
    NetRuleHardwareBindForm = " yes yes container"
    NetRuleHardwareClass    = {"AMB8002Adapter basic"}

    ; Registry Key
    ProductKeyName	    = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
    ParamKeyName	    = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"

[GeneralConstants]
    from		    = ""
    to			    = ""
    ExitCodeOk		    = 0
    ExitCodeCancel	    = 1
    ExitCodeFatal	    = 2
    KeyNull		    = ""
    MAXIMUM_ALLOWED	    = 33554432
    RegistryErrorIndex	    = NO_ERROR
    KeyProduct		    = ""
    KeyParameters	    = ""
    TRUE		    = 1
    FALSE		    = 0
    NoTitle		    = 0
    ExitState		    = "Active"
    OldVersionExisted	    = $(FALSE)
    DriverPath		    = $(!STF_NTPATH)\drivers

[date]
    ; Now = {Sec from 1-1-1970, Year, Month, Day, Hour, Minute, Second}
    Now = {} ? $(!LIBHANDLE) GetSystemDate

;----------------------------------------------------------------------------
; 1. Identify
;
; DESCRIPTION:	 To verify that this INF deals with the same type of options
;		 as we are choosing currently.
; INPUT:	 None
; OUTPUT:	 $($R0): STATUS: STATUS_SUCCESSFUL
;		 $($R1): Option Type (COMPUTER ...)
;		 $($R2): Diskette description
;----------------------------------------------------------------------------
[Identify]
    read-syms Identification
    set Status = STATUS_SUCCESSFUL
    set Identifier = $(OptionType)
    set Media = #("Source Media Descriptions", 1, 1)
    Return $(Status) $(Identifier) $(Media)

;----------------------------------------------------------------------------
; 2. ReturnOptions:
;
; DESCRIPTION:	 To return the option list supported by this INF and the
;		 localised text list representing the options.
; INPUT:	 $($0):  Language used. ( ENG | FRN | ... )
; OUTPUT:	 $($R0): STATUS: STATUS_SUCCESSFUL |
;				 STATUS_NOLANGUAGE
;				 STATUS_FAILED
;				 STATUS_NOTSUPPORTED
;		 $($R1): Option List
;		 $($R2): Option Text List
;----------------------------------------------------------------------------
[ReturnOptions]
    set Status = STATUS_FAILED
    set OptionList = {}
    set OptionTextList = {}

    ; Check if the language requested is supported
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) in $(LanguageList)
	; Check if the platforms requested is supported
	ifstr(i) $($1) == ""
	    goto returnoptions
	endif
	set PlatformList = ^(PlatformsSupported, 1)
	Ifcontains(i) $($1) in $(PlatformList)
	    goto returnoptions
	else
	    set Status = STATUS_NOTSUPPORTED
	    goto finish_ReturnOptions
	endif
    else
	    set Status = STATUS_NOLANGUAGE
	    goto finish_ReturnOptions
    endif

; Form a list of all the options and another of the text representing
returnoptions = +
    set OptionList = ^(Options, 1)
    set OptionTextList = ^(OptionsText$($0), 1)
    set Status = STATUS_SUCCESSFUL

finish_ReturnOptions = +
    Return $(Status) $(OptionList) $(OptionTextList)

;------------------------------------------------------------------------
; 3. InstallOption:
;
;      This section is shelled to by main installation processing
;      or by NCPASHEL.INF during reconfig, removal, update, etc.
;
; FUNCTION:  To copy files representing Options
;	     To configure the installed option
;	     To update the registry for the installed option
; INPUT:     $($0):  Language to use
;	     $($1):  OptionID to install
;	     $($2):  SourceDirectory
;	     $($3):  AddCopy  (YES | NO)
;	     $($4):  DoCopy   (YES | NO)
;	     $($5):  DoConfig (YES | NO)
; OUTPUT:    $($R0): STATUS: STATUS_SUCCESSFUL |
;			     STATUS_NOLANGUAGE |
;			     STATUS_USERCANCEL |
;			     STATUS_FAILED
;------------------------------------------------------------------------
[InstallOption]
    set Status	 = STATUS_FAILED
    set Option	 = $($1)
    set SrcDir	 = $($2)
    set AddCopy  = $($3)
    set DoCopy	 = $($4)
    set DoConfig = $($5)
    Set !DebugOutputControl = 1

    ; Check if the language requested is supported
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) NOT-IN $(LanguageList)
	Return STATUS_NOLANGUAGE
    endif

    set-subst LF = "\n"
    read-syms GeneralConstants
    read-syms AllFileConstants
    read-syms FileConstants"-"$(Option)
    read-syms DialogConstants$(!STF_LANGUAGE)"-"$(Option)
    ifstr(i) $(!NTN_Origination) == "NCPA"
	set Continue = $(OK)
    endif
    read-syms AllFileConstants$(!STF_LANGUAGE)
    read-syms FileConstants$(!STF_LANGUAGE)"-"$(Option)
    detect date
    set-title  $(FunctionTitle)
    set to   = Begin
    set from = Begin

    set CommonStatus = STATUS_SUCCESSFUL
    EndWait

;   Set up the operation-mode-based variables and gaily welcome
;   the user.  If the "install mode" variable is improperly set,
;   assume this is a new installation.
Begin = +
    Set ActivateDetection = FALSE
    Ifstr(i) $(!NTN_InstallMode) == deinstall
	set StartLabel = removeadapter
    else-Ifstr(i) $(!NTN_InstallMode) == Update
	set StartLabel = UpgradeSoftware
    else-Ifstr(i) $(!NTN_InstallMode) == bind
	set StartLabel = bindingadapter
    else-Ifstr(i) $(!NTN_InstallMode) == configure
	set StartLabel = configureadapter
	; You cannot config the software component
	Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
	    Debug-Output "<DBG> Cannot configure the software."
	    Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
	    ifint $($ShellCode) != $(!SHELL_CODE_OK)
		Debug-Output "<DBG> ShellCode error: cannot get an error string."
		goto ShellCodeError
	    endif
	    set Error = $($R0)
	    set from = end
	    set to = end
	    goto nonfatalinfo
	endif
    else
	set StartLabel = installadapter
	set OEM_ABANDON_OPTIONS = {}
	set OEM_ABANDON_SOFTWARE = FALSE
	set OEM_ABANDON_ON = TRUE
    endif

    ; Set the [Default values]
    ifstr(i) $(Option) == AMB8002
	set IOBaseAddrValue = *($(IOBaseAddrList), 2)	; IOBase Address = 0x320
	set MemoryAddrValue = *($(MemoryAddrList), 9)	; Memory Address = 0xD0000
	set IRQValue = *($(IRQList), 3) 		; IRQ Level = 5
	set MediaTypeValue = *($(MediaTypeList), 2)	; Media Type = TP
    endif

    Set from = $(fatal)
    Set to = $(fatal)
    Goto $(StartLabel)

;-----------------------------------------------
; Installation Section
;-----------------------------------------------
installadapter = +
    ; First, check whether the same version of the software exists
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
	; Same version already existed in the local machine
	; Popup the dialog and ask the user whether he wants to continue
	CloseRegKey $(KeyProduct)
	ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
	   ; Cannot Install the same software again
	   Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
	       $(ProductVersion)
	   ifint $($ShellCode) != $(!SHELL_CODE_OK)
	       Debug-Output "<DBG> ShellCode error: cannot get an error string."
	       goto ShellCodeError
	   endif
	   goto end
	else
	   ; Add a new adapter card?
	   Shell $(UtilityInf), CardExistedDlg
	   ifint $($ShellCode) != $(!SHELL_CODE_OK)
	       Debug-Output "<DBG> ShellCode error: cannot get an error string."
	       goto ShellCodeError
	   endif
	   ifstr(i) $($R1) != "OK"
	       goto end
	   endif
	   set OldVersionExisted = $(TRUE)
	endif
    endif

    ; dll load addition
    Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) NO
    Ifint $($ShellCode) != $(!SHELL_CODE_OK)
	Goto ShellCodeError
    Else-Ifstr(i) $($R0) == STATUS_FAILED
	Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set Error = $($R0)
	Goto fatal
    Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
	Goto successful
    Endif

    Set SrcDir = $($R1)
    install "Install-Dll"
    goto adaptersetup

;-----------------------------------------------
; Configuration Section
;-----------------------------------------------
; Get the current values of all the parameters
configureadapter = +
    Ifstr $(KeyProduct) == $(KeyNull)
	OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
	Ifstr $(KeyProduct) == $(KeyNull)
	    set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
	    Debug-Output "<DBG> Cannot find component product key"
	    goto fatalregistry
	Endif
    Endif

    ; Get the other parameters;  they're attached to the service parameters key
    Debug-Output "<DBG> INF: Shelling to FindService"
    Shell $(UtilityInf) FindService, $(KeyProduct)
    Ifint $($ShellCode) != $(!SHELL_CODE_OK)
	Debug-Output "<DBG> INF: FindService shell failure"
	Goto ShellCodeError
    Endif
    Ifstr(i) $($R0) != NO_ERROR
	Debug-Output "<DBG> INF: FindService Shell error: "$($R0)
	Goto fatalregistry
    endif

    Set KeyParameters = $($R2)

    ;  We don't need the services key, so close it.
    CloseRegKey $($R1)
    Ifstr $(KeyParameters) == $(KeyNull)
	set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
	Debug-Output "<DBG> Cannot find component service"
	goto fatalregistry
    endif
    set OldVersionExisted = $(TRUE)
    set ValueName = ""
    set ValueData = ""
    set ValueStr  = ""
    set ValueList = {}

    ; Get the old values from the Registry [Get Values]
    EnumRegValue $(KeyParameters) ValueList
    ifstr(i) $(Option) == AMB8002
	ForListDo $(ValueList)
	    set ValueItem = $($)
	    set ValueName = *($(ValueItem),1)
	    set ValueData = *($(ValueItem),4)
	    ifstr(i) $(ValueName) == "IoBaseAddress"
		set IOBaseAddrIndex = $(ValueData)
	    else-ifstr(i) $(ValueName) == "PCCARDAttributeMemoryAddress"
		set MemoryAddrIndex = $(ValueData)
	    else-ifstr(i) $(ValueName) == "InterruptNumber"
		set IRQValueIndex = $(ValueData)
	    endif
	EndForListDo

	set IOBaseAddrValue = *($(IOBaseAddrList), ~($(IOBaseAddrValues),$(IOBaseAddrIndex)))
	ifstr(i) $(IOBaseAddrValue) == ""
	    set IOBaseAddrValue = *($(IOBaseAddrList), 1)
	endif
	set MemoryAddrValue = *($(MemoryAddrList), ~($(MemoryAddrValues),$(MemoryAddrIndex)))
	ifstr(i) $(MemoryAddrValue) == ""
	    set MemoryAddrValue = *($(MemoryAddrValues), 9)
	endif
	set IRQValue = *($(IRQValues), ~($(IRQList), $(IRQValueIndex)))
	ifstr(i) $(IRQValue) == ""
	    set IRQValue = *($(IRQList), 3)
	endif
    endif

;   Put up the adapter configuration dialog if necessary.
;   Note that $(CurrParamSettings) has the old known parameter values.
adaptersetup = +
    Set from = adapteroptions

adapteroptions = +
    LoadLibrary "disk 1" $(DialogDllName) hLib
    read-syms FileDependentDlg$(!STF_LANGUAGE)"-"$(Option)
    set Static1Label = "AmbiCom AMB8002 Ethernet PC Card"

    Debug-Output "<DBG> ----- Before calling my dialog -----"
    Debug-Output "<DBG>  Combo1Out "$(Combo1Out)
    Debug-Output "<DBG>  Combo2Out "$(Combo2Out)
    ui start "InputDlg"  $(hLib)
    Debug-Output "<DBG> ----- After calling my dialog -----"
    set ExitButton = $(ButtonPressed)
    Debug-Output "<DBG>  Combo1Out "$(Combo1Out)
    Debug-Output "<DBG>  Combo2Out "$(Combo2Out)
    Debug-Output "<DBG>  ButtonPressed "$(ButtonPressed)

    FreeLibrary $(hLib)
    ifstr(i) $(DLGEVENT) == "CONTINUE"
	ifstr(i) $(Option) == AMB8002
	    set IOBaseAddrIndex = $(Combo1Out)
	    set MemoryAddrIndex = $(Combo2Out)
	    set IRQValueIndex = $(Combo3Out)
	    set MediaTypeIndex = $(Combo4Out)
	    set ExitButton = $(ButtonPressed)
	endif
	ui pop 1
    else-ifstr(i) $(DLGEVENT) == "EXIT"
	set CommonStatus = STATUS_USERCANCEL
	ui pop 1
	goto end
    else
	set CommonStatus = STATUS_USERCANCEL
	ui pop 1
	Debug-Output "<DBG> Action: unknown. Bye."
	goto end
    endif

; If installing, go create the necessary keys;
; if configuring, they're already open.
skipoptions =+
    ifint $(OldVersionExisted) == $(TRUE)
	ifstr(i) $(!NTN_InstallMode) == configure
	    goto writeparameters
	endif
    endif
    StartWait

    ; Add Software Component
    ifint $(OldVersionExisted) == $(FALSE)
	ifstr(i) $(!NTN_InstallMode) == "install"
	    Ifstr(i) $(DoCopy) == "YES"
		Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
		Ifint $($ShellCode) != $(!SHELL_CODE_OK)
		    Goto ShellCodeError
		Else-Ifstr(i) $($R0) == STATUS_FAILED
		    Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
		    ifint $($ShellCode) != $(!SHELL_CODE_OK)
			goto ShellCodeError
		    endif
		    set Error = $($R0)
		    Goto fatal
		Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
		    Goto successful
		Endif
		Set SrcDir = $($R1)
	    Endif
	    install "Install-Option"
	    ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
		Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
		ifint $($ShellCode) != $(!SHELL_CODE_OK)
		    goto ShellCodeError
		endif
		set Error = $($R0)
		goto fatal
	    endif
	endif

	Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName), +
	    $(ProductSoftwareName), +
	    $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
	    $(ProductSoftwareImage), "kernel", "NDIS", {}, "",+
	    $(NetEventDLL)

	Set OEM_ABANDON_SOFTWARE = TRUE
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    Debug-Output "<DBG> ShellCode error"
	    goto ShellCodeError
	endif

	;   At this point:
	;     $R1 contains the product version key handle;
	;     $R2 contains the NetRules subkey handle;
	;     $R3 contains the new Services key handle; and
	;     $R4 contains the Parameters key
	;     $R5 contains the Linkage Key
	set RegistryErrorIndex = $($R0)
	set KeyProduct	    = $($R1)
	Set SoftNetRulesKey = $($R2)
	CloseRegKey $($R3)
	CloseRegKey $($R4)
	CloseRegKey $($R5)

	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    EndWait
	    Debug-Output "<DBG> Registry error: add software components"
	    CloseRegKey $(KeyProduct)
	    CloseRegKey $(SoftNetRulesKey)
	    goto fatalregistry
	endif

	set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
			    {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
			    {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
			    {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
			    {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDesc)},+
			    {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
			    {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}

	Shell  $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList)
	Debug-Output "<DBG> AddValueList - SoftwareType, MajorVersion,..."

	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    Debug-Output "<DBG> ShellCode error."
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    EndWait
	    Debug-Output "<DBG> Registry error: add value list."
	    CloseRegKey $(KeyProduct)
	    CloseRegKey $(SoftNetRulesKey)
	    goto fatalregistry
	endif

	set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
			    {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
			    {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
			    {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
			    {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
			    {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}

	Shell  $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList)
	Debug-Output "<DBG> AddValueList - type, use, bindform, class, ..."
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    Debug-Output "<DBG> ShellCode error."
	    goto ShellCodeError
	endif

	set RegistryErrorIndex = $($R0)
	CloseRegKey $(KeyProduct)
	CloseRegKey $(SoftNetRulesKey)
	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    EndWait
	    Debug-Output "<DBG> Resgitry error: add value list."
	    goto fatalregistry
	endif
    endif

;   Create the HARDWARE\Netcard region and its corresponding service
    Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
    ifint $($R4) != -1
	Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
    endif

    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	Debug-Output "<DBG> Cannot add hardware component"
	goto ShellCodeError
    endif

    set RegistryErrorIndex = $($R0)
    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	EndWait
	Debug-Output "<DBG> Registry error: add hardware component"
	CloseRegKey $($R1)
	CloseRegKey $($R2)
	CloseRegKey $($R3)
	goto fatalregistry
    endif

;   At this point:
;     $R1  Registry key variable for HARDWARE\Netcard\(n)
;     $R2  Registry key variable for HARDWARE\Netcard\(n)\\NetRules
;     $R3  Registry key handle for <service>\Parameters key
;     $R4  Adapter number assigned to adapter
;     $R5  Service name generated by combining svc name with adapter number
;
    set KeyParameters = $($R3)
    set KeyAdapterRules = $($R2)
    set AdapterNumber = $($R4)

    set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
		       {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardwareTitle)},+
		       {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareDesc)},+
		       {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
		       {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
		       {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}

    Shell  $(UtilityInf), AddValueList, $($R1), $(NewValueList)
    Debug-Output "<DBG> AddValueList - Manufacturer, Title, Description,..."
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	Debug-Output "<DBG> ShellCode error"
	goto ShellCodeError
    endif

    CloseRegKey $($R1)

    set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
    set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)

    set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
			{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
			{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
			{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}

    Shell  $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
    Debug-Output "<DBG> AddValueList - type, bindform, class, InfOption"
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	Debug-Output "<DBG> ShellCode error."
	goto ShellCodeError
    endif

    set RegistryErrorIndex = $($R0)

    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	EndWait
	Debug-Output "<DBG> Resgitry error: add value list."
	CloseRegKey $(KeyParameters)
	CloseRegKey $(KeyAdapterRules)
	goto fatalregistry
    endif

    CloseRegKey $(KeyAdapterRules)
    goto writeparameters

; REQUIRED: $(KeyParameters) contains service Parameters key handle
writeparameters = +
    Shell $(UtilityInf), GetBusTypeNum
    set BusTypeNum = $($R1)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	Debug-Output "<DBG> ShellCode error."
	goto ShellCodeError
    endif

;   Add the rest of the parameters to the Services area
    ifstr(i) $(Option) == AMB8002
	set IRQValue = *($(IRQValues), ~($(IRQList), $(IRQValueIndex)))
	set IOBaseAddrValue = *($(IOBaseAddrValues), ~($(IOBaseAddrList), $(IOBaseAddrIndex)))
	set MemoryAddrValue = *($(MemoryAddrValues),  ~($(MemoryAddrList), $(MemoryAddrIndex)))
	set MediaTypeValue = *($(MediaTypeValues), ~($(MediaTypeList), $(MediaTypeIndex)))
	set NewValueList = {{IoBaseAddress, $(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)},+
			    {IoLength, $(NoTitle),$(!REG_VT_DWORD),32},+
			    {MediaType, $(NoTitle),$(!REG_VT_DWORD),$(MediaTypeValue)},+
			    {InterruptNumber, $(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+
			    {PCCARDAttributeMemoryAddress, $(NoTitle),$(!REG_VT_DWORD),$(MemoryAddrValue)},+
			    {PCCARDAttributeMemorySize, $(NoTitle),$(!REG_VT_DWORD),4096},+
			    {BusType, $(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
			    {BusNumber, $(NoTitle),$(!REG_VT_DWORD),0},+
			    {Pcmcia, $(NoTitle),$(!REG_VT_DWORD),1},+
			    {OSType, $(NoTitle), $(!REG_VT_DWORD),1}}
    endif
    Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
    Debug-Output "<DBG> AddValueList - IoBaseAddress,..."
    CloseRegKey $(KeyParameters)

    ; ----------------------------------------------------------------------------------------------------------
    ; add driver info to the SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\AmbiCom Inc
    ; ----------------------------------------------------------------------------------------------------------
    ifstr(i) $(Option) == AMB8002
	OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\AmbiCom Inc\AMB8002" $(MAXIMUM_ALLOWED) MyPcmciaHandle
	Ifstr $(MyPcmciaHandle) == $(KeyNull)
	    Debug-Output "<DBG> CreateRegKey (AMB8002)"
	    OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase" $(MAXIMUM_ALLOWED) MyPcmciaKey
	    CreateRegKey $(MyPcmciaKey) {"AmbiCom Inc",0,GenericClass} "" $(MAXIMUM_ALLOWED) "" MyPcmcialHandle
	    CloseRegKey $(MyPcmciaKey)
	    OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\AmbiCom Inc" $(MAXIMUM_ALLOWED) MyPcmciaKey
	    CreateRegKey $(MyPcmciaKey) {"AMB8002",0,GenericClass} "" $(MAXIMUM_ALLOWED) "" MyPcmcialHandle
	    CloseRegKey $(MyPcmciaKey)
	    OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\AmbiCom Inc\AMB8002" $(MAXIMUM_ALLOWED) MyPcmciaHandle
	endif
	set NewValueList = {{Driver,$(NoTitle),$(!REG_VT_SZ),"AMB8002"}}
	Shell $(UtilityInf), AddValueList, $(MyPcmciaHandle), $(NewValueList)
	Debug-Output "<DBG> AddValueList - Driver:REG_SZ:AMB8002"
	CloseRegKey $(MyPcmciaHandle)

	OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\AmbiCom Inc\AMB8002B" $(MAXIMUM_ALLOWED) MyPcmciaHandle
	Ifstr $(MyPcmciaHandle) == $(KeyNull)
	    Debug-Output "<DBG> CreateRegKey (AMB8002B)"
	    OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase" $(MAXIMUM_ALLOWED) MyPcmciaKey
	    CreateRegKey $(MyPcmciaKey) {"AmbiCom Inc",0,GenericClass} "" $(MAXIMUM_ALLOWED) "" MyPcmcialHandle
	    CloseRegKey $(MyPcmciaKey)
	    OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\AmbiCom Inc" $(MAXIMUM_ALLOWED) MyPcmciaKey
	    CreateRegKey $(MyPcmciaKey) {"AMB8002B",0,GenericClass} "" $(MAXIMUM_ALLOWED) "" MyPcmcialHandle
	    CloseRegKey $(MyPcmciaKey)
	    OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\AmbiCom Inc\AMB8002B" $(MAXIMUM_ALLOWED) MyPcmciaHandle
	endif
	set NewValueList = {{Driver,$(NoTitle),$(!REG_VT_SZ),"AMB8002"}}
	Shell  $(UtilityInf), AddValueList, $(MyPcmciaHandle), $(NewValueList)
	Debug-Output "<DBG> AddValueList - Driver:REG_SZ:AMB8002"
	CloseRegKey $(MyPcmciaHandle)
    endif

    goto successful

;-----------------------------------------------
; Binding section
;-----------------------------------------------
bindingadapter =+
    set Error = "Binding: Sorry, not yet implemented."
    goto fatal

;-----------------------------------------------
; Removeadapter section
;-----------------------------------------------
removeadapter = +
    Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
	; Remove Software Component
	Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
	$(ProductSoftwareName)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    Debug-Output "<DBG> ShellCode error"
	    goto ShellCodeError
	endif

	set RegistryErrorIndex = $($R0)

	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    goto fatalregistry
	endif
    else
	Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName), $(!NTN_RegBase)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    Debug-Output "<DBG> ShellCode error"
	    goto ShellCodeError
	endif

	set RegistryErrorIndex = $($R0)

	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    goto fatalregistry
	endif
    endif
    goto end

;-----------------------------------------------
; Upgrade Software section
;-----------------------------------------------
UpgradeSoftware = +
    ;
    ; First determine whether we want to do upgrade or update for software
    ; or hardware component. Then we will determine whether the Mode is
    ; update or upgrade.
    ;
    ; If the same version of the product existed in the registry, we do
    ; update. Otherwise, we will do a upgrade
    ;
    ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
	; Upgrade software component
	;
	; see whether the same version exist or not
	;
	OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct

	Ifstr $(KeyProduct) != $(KeyNull)
	    GetRegValue $(KeyProduct),"MajorVersion", VersionInfo
	    set Version = *($(VersionInfo), 4)
	    ;
	    ; Update the binaries
	    ;
	    Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
	    ifint $($ShellCode) != $(!SHELL_CODE_OK)
		Debug-Output "<DBG> ShellCode error"
		goto ShellCodeError
	    endif
	    set !UG_Filename = $($R0)

	    ifstr(i) $(!UG_Filename) != ""
		install "Install-Update"
		ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
		    goto fatal
		endif
	    endif

	    ; Upgrade the version number
	    ;
	    SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
	    SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}

	    ;
	    ; do nothing for update
	    ;
	    ifint $(Version) != $(ProductVersion)
	       ;
	       ; If the major version number is not the same,
	       ; it is major upgrade. So let Upgrade the product
	       ;
	       ;
	       ; make other upgrade change if necessary
	       ;
	    endif
	    CloseRegKey $(KeyProduct)
	else
	    ;
	    ; Cannot Open software key, goto ERROR
	    ;
	    goto fatalregistry
	endif
    else
	;
	; upgrade/update hardware component
	; There is no different between upgrade and update for hardware
	; component
	;
	; 1. Get the Service Name
	; 2. Change the NetRule section if necessary
	;
	OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) +
	      $(MAXIMUM_ALLOWED) NetworkCardKey
	Ifstr(i) $(NetworkCardKey) != $(KeyNull)
	    ;
	    ; Get Service name
	    ;
	    GetRegValue $(NetworkCardKey),"ServiceName", ServiceNameInfo
	    set ServiceName = *($(ServiceNameInfo), 4)

	    ;
	    ; Change the NetRule if necessary
	    ;
	    OpenRegKey $(NetworkCardKey) "" "NetRules" +
		$(MAXIMUM_ALLOWED) NetRuleKey
	    Ifstr(i) $(NetRuleKey) != $(KeyNull)
		;
		; Make the change....
		;
	    else
		;
		; Error, cannot open net rules key
		;
		goto fatalregistry
	    endif

	    CloseRegKey $(NetRules)
	    CloseRegKey $(NetworkCardKey)
	else
	    ;
	    ; Error, cannot open network card key
	    ;
	    goto fatalregistry
	endif
	;
	; 3. Change the service section of the hardware. i.e.,
	;    ParameterName change, value change, etc.
	;
	OpenRegKey $(!REG_H_LOCAL) "" +
	      $(!NTN_ServiceBase)"\"$(ServiceName) +
	      $(MAXIMUM_ALLOWED) ServiceKey

	Ifstr(i) $(ServiceKey) != $(KeyNull)
	    ;
	    ; Get the ServiceKey to change the Start value
	    ; or Type value. Or open Parameters key to
	    ; change the hardware parameters if necessary.
	    ;
	    CloseRegKey $(ServiceKey)
	else
	    ;
	    ; Error, cannot open network card key
	    ;
	    goto fatalregistry
	endif
    endif

    goto end
    ;
    ; End of Upgrade Software
    ;

;
;  Escape hatches
;
successful = +
    goto end

abandon = +
    ForListDo $(OEM_ABANDON_OPTIONS)
	Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName), $($)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    Debug-Output "<DBG> ShellCode error"
	    goto ShellCodeError
	endif

	set RegistryErrorIndex = $($R0)

	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    goto fatalregistry
	endif
    EndForListDo

    Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
	; Remove Software Component
	Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName), FALSE
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    Debug-Output "<DBG> ShellCode error"
	    goto ShellCodeError
	endif

	set RegistryErrorIndex = $($R0)

	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    goto fatalregistry
	endif
    endif

    goto end

;
; warning display
;
warning = +
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
	goto $(to)
    else-ifstr(i) $($R1) == "CANCEL"
	goto $(from)
    else
	goto "end"
    endif

;
; non fatal error display
;
nonfatalinfo = +
    Set Severity = STATUS
    Set CommonStatus = STATUS_USERCANCEL
    goto nonfatalmsg
nonfatal = +
    Set Severity = NONFATAL
    goto nonfatalmsg
nonfatalmsg = +
    ifstr(i) $(Error) == ""
	Set Severity = NONFATAL
	Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
	goto $(from)
    else
	goto "end"
    endif

;
;  Registry is broken
;
fatalregistry = +
    Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    set Error = $($R0)
    goto fatal

;
;  Netcard detection failure
;
fataldetect = +
    Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	Debug-Output "<DBG> ShellCode error: cannot get an error string."
	goto ShellCodeError
    endif
    set Error = $($R0)
    Goto fatal

;
; fatal error display
;
fatal = +
    ifstr(i) $(Error) == ""
	Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif

    goto setfailed

;
;  Shelling error
;
ShellCodeError = +
    set DlgType      = "MessageBox"
    set STF_MB_TITLE = $(ShellCodeErrorTitle)
    set STF_MB_TEXT  = $(ShellCodeErrorText)
    set STF_MB_TYPE  = 1
    set STF_MB_ICON  = 3
    set STF_MB_DEF   = 1
    ui start "Error Message"
    goto setfailed

setfailed = +
    set CommonStatus = STATUS_FAILED
    ;
    ; if OEM_ABANDON_ON == TRUE, then remove the registry entries
    ;
    ifstr(i) $(OEM_ABANDON_ON) == TRUE
	set OEM_ABANDON_ON = FALSE
	goto abandon
    endif
    goto end

end = +
    goto term

term = +
    Return $(CommonStatus)

[DebugConfiguration]
    Set InfName = "OEMSETNT.INF"
    Debug-Output $(InfName)"<DBG> **CONFIGURATION STATE: "$($0)
    Debug-Output $(InfName)"<DBG> IRQ_Level is "$(!p:IRQ_Level)
    Debug-Output $(InfName)"<DBG> IOBaseAddrValue is "$(!p:IOBaseAddrValue)
    Debug-Output $(InfName)"<DBG> MemoryAddr is "$(!p:MemoryAddr)
    Debug-Output $(InfName)"<DBG> TransceiverValue is "$(!p:TransceiverValue)
    return

;***************************************************************
;  INSTALL SECTIONS
;***************************************************************
[Install-Option]
    set STF_VITAL = ""

    ifstr(i) $(AddCopy) == "YES"
	AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
    endif

    ifstr(i) $(DoCopy) == "YES"
       ;
       ; Copy files in the copy list
       ;
       set !STF_NCPA_FLUSH_COPYLIST = TRUE
       CopyFilesInCopyList
    endif
    Exit

[Install-Update]
   set STF_VITAL = ""
   set STF_OVERWRITE = "VERIFYSOURCEOLDER"
   AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
   AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
   set !STF_NCPA_FLUSH_COPYLIST = TRUE
   CopyFilesInCopyList
   exit

[Install-Dll]
   set STF_VITAL = ""
   AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH)
   set !STF_NCPA_FLUSH_COPYLIST = TRUE
   CopyFilesInCopyList
   exit

[Source Media Descriptions]
    1 = "AmbiCom Diskette for AMB8002 Adapters", TAGFILE = AMB8002.DSK

[ProductType]
    STF_PRODUCT  = Winnt
    STF_PLATFORM = I386

[Files-Inf]
1, OEMSETNT.INF, SIZE=43500, RENAME=$(!UG_Filename)

[Files-Dll]
1, AMB8002.DLL, SIZE=100000

[Files-AMB8002]
1, AMB8002.SYS, SIZE=50000

[LanguagesSupported]
ENG

[AllFileConstantsENG]
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
	       "Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"
DialogDllName	  = "AMB8002.DLL"

;;;;;; START AMB8002 ;;;;;;
[FileConstantsENG-AMB8002]
FunctionTitle		    = "AMB8002 Ethernet PC Card"$(GenericInfVersion)
ProductSoftwareTitle	    = $(GenericDriverName)
ProductHardwareTitle	    = $(GenericAdapterName)
IRQList 		    = ^(IRQChoices, 1)
IRQValues		    = ^(IRQChoices, 2)
IOBaseAddrList		    = ^(IOBaseChoices, 1)
IOBaseAddrValues	    = ^(IOBaseChoices, 2)
MemoryAddrList		    = ^(MemoryAddrChoices,1)
MemoryAddrValues	    = ^(MemoryAddrChoices,2)
MediaTypeList		    = ^(MediaTypeChoices, 1)
MediaTypeValues 	    = ^(MediaTypeChoices, 2)

[DialogConstantsENG-AMB8002]
Help	    = "Help"
Exit	    = "Cancel"
OK	    = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel	    = "Cancel"

[FileDependentDlgENG-AMB8002]
DlgType = "RadioCombination"
DlgTemplate = "AMB8002"
Caption = $(FunctionTitle)
HelpContext = $(!IDH_DB_OEMNADE2_INS)
CBOptionsGreyed = {}
NotifyFields = {NO, NO, NO, NO, NO, NO, NO}
Combo1Label = "I/O Port Address:"
Combo2Label = "Memory Address:"
Combo3Label = "Network Interrupt:"
Combo4Label = "Media Type:"
;
Combo1List = $(IOBaseAddrList)
Combo1Out  = $(IOBaseAddrValue)
Combo2List = $(MemoryAddrList)
Combo2Out  = $(MemoryAddrValue)
Combo3List = $(IRQList)
Combo3Out  = $(IRQValue)
Combo4List = $(MediaTypeList)
Combo4Out  = $(MediaTypeValue)

ComboListItemsIn  = {Combo1List,Combo2List, Combo3List}
ComboListItemsOut = {Combo1Out,Combo2Out, Combo3Out}
EditTextIn  = {"",""}
EditTextLim = {"",""}
;;;;;; END AMB8002 ;;;;;;

[IOBaseChoices]
IOBase_1 = "0x300",768
IOBase_2 = "0x320",800
IOBase_3 = "0x340",832
IOBase_4 = "0x360",864

[IRQChoices]
IRQ_1 = "3",3
IRQ_2 = "4",4
IRQ_3 = "5",5
IRQ_4 = "7",7
IRQ_5 = "9",9
IRQ_6 = "10",10
IRQ_7 = "11",11
IRQ_8 = "15",15

[MemoryAddrChoices]
MA_1  = "0xC8000", 819200
MA_2  = "0xC9000", 823296
MA_3  = "0xCA000", 827392
MA_4  = "0xCB000", 831488
MA_5  = "0xCC000", 835584
MA_6  = "0xCD000", 839680
MA_7  = "0xCE000", 843776
MA_8  = "0xCF000", 847872
MA_9  = "0xD0000", 851968
MA_10 = "0xD1000", 856064
MA_11 = "0xD2000", 860160
MA_12 = "0xD3000", 864256
MA_13 = "0xD4000", 868352
MA_14 = "0xD5000", 872448
MA_15 = "0xD6000", 876544
MA_16 = "0xD7000", 880640
MA_17 = "0xD8000", 884736
MA_18 = "0xD9000", 888832
MA_19 = "0xDA000", 892928
MA_20 = "0xDB000", 897024
MA_21 = "0xDC000", 901120
MA_22 = "0xDD000", 905216
MA_23 = "0xDE000", 909312
MA_24 = "0xDF000", 913408
MA_25 = "0xE0000", 917504
MA_26 = "0xE1000", 921600
MA_27 = "0xE2000", 925696
MA_28 = "0xE3000", 929792
MA_29 = "0xE4000", 933888
MA_30 = "0xE5000", 937984
MA_31 = "0xE6000", 942080
MA_32 = "0xE7000", 946176
MA_33 = "0xE8000", 950272
MA_34 = "0xE9000", 954368
MA_35 = "0xEA000", 958464
MA_36 = "0xEB000", 962560
MA_37 = "0xEC000", 966656
MA_38 = "0xED000", 970752
MA_39 = "0xEE000", 974848
MA_40 = "0xEF000", 978944

[MediaTypeChoices]
MT_1 = "Auto Detect", 0
MT_2 = "TP (10BaseT)", 1
MT_3 = "COAX (10Base2)", 2
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 1.07