NETSNIP.INF Driver File Contents (pcm24drv.exe)

; NETSNIP.INF
;
; Novell Network Interface Cards.
;
; Copyright 1993-1995, Microsoft Corporation

[version]
LayoutFile=layout.inf
signature="$CHICAGO$"
Class=Net
provider=%V_MS%

[Manufacturer]
%V_NatSemi%=NatSemi
%V_TC%=TC
%V_IBM%=IBM
%V_ALTA%=ALTA
%V_MICRO%=MICRO
%V_TOSHIBA%=TOSHIBA
;%V_GATEWAY%=GATEWAY
%V_NDC%=NDC
%V_KINGSTON%=KINGSTON

[NatSemi]
%*SNIP.DeviceDesc%=*SNIP.ndi, PCMCIA\IBM_Corp.-Ethernet-1B1C    

[TC]
%*TC.DeviceDesc%=*SNIP.ndi, PCMCIA\IBM_Corp.-Ethernet-1B1C    

[IBM]
%*IBM.DeviceDesc%=*SNIP.ndi, PCMCIA\IBM_Corp.-Ethernet-1B1C    
%*IBM2.DeviceDesc%=*SNIP2.ndi, PCMCIA\IBM_Corp.-Ethernet-6446    

[ALTA]
%*ALTA.DeviceDesc%=*SNIP.ndi, PCMCIA\IBM_Corp.-Ethernet-1B1C    

[MICRO]
%*MICRO.DeviceDesc%=*SNIP.ndi, PCMCIA\IBM_Corp.-Ethernet-1B1C    

[TOSHIBA]
%*TOSHIBA.DeviceDesc%=*SNIP.ndi, PCMCIA\IBM_Corp.-Ethernet-1B1C    

;[GATEWAY]
;%*GATEWAY.DeviceDesc%=*SNIP.ndi, PCMCIA\IBM_Corp.-Ethernet-1B1C    

[NDC]
%*NDC.DeviceDesc%=*SNIP.ndi, PCMCIA\IBM_Corp.-Ethernet-1B1C    

[KINGSTON]
%*KINGSTON.DeviceDesc%=*SNIP.ndi, PCMCIA\IBM_Corp.-Ethernet-1B1C    
%*KINGSTON2.DeviceDesc%=*SNIP4.ndi, "PCMCIA\Kingston_Technology_Corp.-EtheRx_PC_Card_Ethernet_Adapter-02B7"
%*KINGSTON2.DeviceDesc%=*SNIP3.ndi, PCMCIA\KINGSTON_TECHNOLOGY_CORP.-ETHERX-B45B    

;****************************************************************************
;    *PNP815f National Semiconductor Ethernode *16AT
;****************************************************************************

[*SNIP.ndi]
AddReg=*SNIP.ndi.reg,ne2000.ndi.reg,Clone.params.reg

[*SNIP.ndi.reg]
HKR,Ndi,DeviceID,,"PCMCIA\IBM_Corp.-Ethernet-1B1C"

[*SNIP2.ndi]
AddReg=*SNIP2.ndi.reg,ne2000.ndi.reg,Clone.params.reg

[*SNIP2.ndi.reg]
HKR,Ndi,DeviceID,,"PCMCIA\IBM_Corp.-Ethernet-6446"

[*SNIP3.ndi]
AddReg=*SNIP3.ndi.reg,ne2000.ndi.reg,Clone.params.reg

[*SNIP3.ndi.reg]
HKR,Ndi,DeviceID,,"PCMCIA\KINGSTON_TECHNOLOGY_CORP.-ETHERX-B45B"

[*SNIP4.ndi]
AddReg=*SNIP4.ndi.reg,ne2000.ndi.reg,Clone.params.reg

[*SNIP4.ndi.reg]
HKR,Ndi,DeviceID,,"PCMCIA\Kingston_Technology_Corp.-EtheRx_PC_Card_Ethernet_Adapter_02B7"

;****************************************************************************
; NE2000 Drivers
;****************************************************************************
; Base section for ne2000 users
[ne2000.ndi.reg]
; key,subkey,valuname,type,value
HKR,,DevLoader,,*ndis
HKR,,DeviceVxDs,,snip.vxd
HKR,,EnumPropPages,,"netdi.dll,EnumPropPages"
; NDIS Info
HKR,NDIS,LogDriverName,,"SNIP"
HKR,NDIS,MajorNdisVersion,1,03
HKR,NDIS,MinorNdisVersion,1,0A
; Interfaces
HKR,Ndi\Interfaces,DefUpper,,"ndis3"
HKR,Ndi\Interfaces,DefLower,,"ethernet"
HKR,Ndi\Interfaces,UpperRange,,"ndis3"
HKR,Ndi\Interfaces,LowerRange,,"ethernet"

HKR,NDI,CardType,,"PCMCIA"

; Install sections
HKR,Ndi\Install,ndis3,,"ne2000.ndis3"

; Install NDIS3
[ne2000.ndis3]
CopyFiles=ne2000.ndis3.CopyFiles
[ne2000.ndis3.CopyFiles]
snip.vxd

; extra params for clones
[Clone.params.reg]
; Resources
HKR,,Interrupt,1,04,00,00,00
HKR,,IOBase,1,02,00,00,00
HKR,,AttributeBase,1,01,00,00,00

;;temp until I read from attribute space
;HKR,,NetAddress,,123456789012

; OVERRIDE FOR 16K RAM WINDOW
HKR,Override,0000,1,\
;
00,04,00,00, \      ; CONFIGMG_VERSION
00,00,00,00, \      ; PRIORITY
;
; I/O Resource Descriptor
;
24,00,00,00, \      ; Total length of I/O Resource Descriptor
02,00,00,00, \      ; ResType_IO = 0x00000002
01,00, \       ; IOD_Count;
0C,00, \       ; IOD_Type;         // IOType_Range = 0x000C
00,00, \       ; IOD_Alloc_Base;
00,00, \       ; IOD_Alloc_End;
00,00, \       ; IOD_DesFlags;
00, \               ; IOD_Alloc_Alias;
00, \               ; IOD_Alloc_Decode;
E0,FF, \       ; IOR_Align;        // Mask for base alignment
20,00, \       ; IOR_nPorts;       // Number of ports
00,00, \       ; IOR_Min;          // Min port address
FF,FF, \       ; IOR_Max;          // Max port address
00,00, \       ; IOR_RangeFlags;   // Flags
00, \               ; IOR_Alias;        // Alias offset
00, \               ; IOR_Decode;       // Address specified
45,00,00,00, \      ; PCCARD flags, 0x40 = 16-bit port
;
; IRQ Resource Descriptor
;
14,00,00,00, \      ; Total length of IRQ Resource Descriptor
04,00,00,00, \      ; ResType_IRQ = 0x00000004
00,00, \       ; IRQD_Flags;
00,00, \       ; IRQD_Alloc_Num;   // Allocated IRQ number
FF,FF, \       ; IRQD_Req_Mask;    // Mask of possible IRQs
00,00, \       ; IRQD_Reserved;
70,00,00,00, \      ; PCCARD flags, 0x20 = Level mode interrupts
;
; Memory Resource Descriptor 0
;
34,00,00,00, \      ; Total length of Memory Resource Descriptor
01,00,00,00, \      ; ResType_Mem = 0x00000001
01,00, \       ; MD_Count;
14,00, \       ; MD_Type;          // MType_Range = 0x0014
00,00,00,00, \      ; MD_Alloc_Base;
00,00,00,00, \      ; MD_Alloc_End;
00,00, \       ; MD_Flags;
00,00, \       ; MD_Reserved;
00,F0,FF,FF, \      ; MR_Align;         // Mask for base alignment
00,10,00,00, \      ; MR_nBytes;        // Count of bytes (4K)
00,00,00,00, \      ; MR_Min;      // Min Address
FF,FF,FF,FF, \      ; MR_Max;      // Max Address
00,00, \       ; MR_Flags;         // Flags
00,00, \       ; MR_Reserved;
02,00,00,00, \      ; PCCARD flags, 0x02 = attribute mem, or
               ;         0x08 = 16-bit common mem
00,00,00,00, \      ; Memory card address
;
; Memory Resource Descriptor 1
;
34,00,00,00, \      ; Total length of Memory Resource Descriptor
01,00,00,00, \      ; ResType_Mem = 0x00000001
01,00, \       ; MD_Count;
14,00, \       ; MD_Type;          // MType_Range = 0x0014
00,00,00,00, \      ; MD_Alloc_Base;
00,00,00,00, \      ; MD_Alloc_End;
00,00, \       ; MD_Flags;
00,00, \       ; MD_Reserved;
00,C0,FF,FF, \      ; MR_Align;         // Mask for base alignment
00,40,00,00, \      ; MR_nBytes;        // Count of bytes (4K)
00,00,00,00, \      ; MR_Min;      // Min Address
FF,FF,FF,FF, \      ; MR_Max;      // Max Address
00,00, \       ; MR_Flags;         // Flags
00,00, \       ; MR_Reserved;
08,00,00,00, \      ; PCCARD flags, 0x02 = attribute mem, or
               ;         0x08 = 16-bit common mem
00,10,01,00, \      ; Memory card address
;
; REQUEST_CONFIG_PKT Descriptor
;
19,00,00,00, \      ; Total length of REQUEST_CONFIG_PKT Descriptor
7C,89,00,00, \      ; (ResType_Ignored_Bit + PCCARD_DEVICE_ID) = 0x897C
00,00, \       ; Socket;
02,00, \       ; Attributes;
32, \               ; Vcc;
32, \ 		    ; Vpp1;
32, \ 		    ; Vpp2;
02, \               ; IntType;
00,00,02,00, \      ; ConfigBase;
00, \               ; Status;
00, \               ; Pin;
00, \               ; Copy;
01, \               ; ConfigIndex;
0B, \               ; Present;
;
00,00,00,00         ; TERMINATOR




;****************************************************************************
; Destination Directories
;****************************************************************************
[DestinationDirs]
DefaultDestDir              =11 ; LDID_SYS
ne2000.ndis3.CopyFiles      =11

;****************************************************************************
; Localizable Strings
;****************************************************************************
[strings]
; Provider
V_MS="Microsoft"
; Manufacturers
V_NatSemi="National Semiconductor"
V_TC="Thomas-Conrad"
V_IBM="IBM"
V_MICRO="Microdyne"
V_ALTA="Alta Research"
V_TOSHIBA="Toshiba"
;V_GATEWAY="Gateway 2000"
V_NDC="National Datacomm"
V_KINGSTON="Kingston"
; PNP National Semiconductor
*SNIP.DeviceDesc="NatSemi NE4100 Infomover or compatible"
*TC.DeviceDesc="Thomas-Conrad TC5041 TC-Card Ethernet PCMCIA Adapter"
*IBM.DeviceDesc="IBM Ethernet Credit Card Adapter"
*IBM2.DeviceDesc="IBM Ethernet Credit Card Adapter II"
*ALTA.DeviceDesc="Alta Research Ethernet PCMCIA LAN Adapter"
*MICRO.DeviceDesc="Microdyne Novell NE4000 PCMCIA Adapter"
*TOSHIBA.DeviceDesc="Toshiba NWETH01 PCMCIA Ethernet Card"
;*GATEWAY.DeviceDesc="Gateway PCMCIA Ethernet Card (old) Infomover 4100 compatible"
*NDC.DeviceDesc="NDC Credit Card Adapter for Ethernet"
*KINGSTON.DeviceDesc="Kingston Etherx PCMCIA (older version)"
*KINGSTON2.DeviceDesc="Kingston Etherx PC Card Ethernet Adapter (KNE-PCM)"
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 2.16