OEMSETUP.INF Driver File Contents (110txsi_20.exe)

;***********************************************************************
; Microsoft Windows NT 4.0 INF file
;
; OEMSETUP.INF
;       NE2000 Compatible PCMCIA Adapter Setup for NT 4.0
;
;   Nov 13 1996  Jason Hsu  Initial version
;*******************************************************************************
[Identification]
    OptionType = NetAdapter

[PlatformsSupported]
    ISA
    EISA
    PCMCIA

[Options]
    KNEPC2

[OptionsTextENG]
    KNEPC2         = "Kingston EtheRx IC PC Card Ethernet Adapter"

[FileConstants]
UtilityInf      = "UTILITY.INF"
ParamInf        = "NCPARAM.INF"
subroutineinf   = "SUBROUTN.INF"
SoftwareType    = "driver"
Exit_Code       = 0
NetEventDLL     = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL     = "%SystemRoot%\System32\IoLogMsg.dll"
Manufacturer    = "Microsoft"
ProductMajorVersion     = "4"
ProductMinorVersion     = "0"
ProductVersion  = $(ProductMajorVersion)"."$(ProductMinorVersion)
ProductSoftwareName     = "NE2000"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\ne2000.sys"
NetRuleSoftwareType     = "ne2000Sys ndisDriver ne2000Driver"
NetRuleSoftwareUse      = $(SoftwareType)
NetRuleSoftwareBindForm = """Ne2000Sys"" yes no container"
NetRuleSoftwareClass    = {"ne2000Driver basic"}
NetRuleSoftwareBindable = {"ne2000Driver ne2000Adapter non exclusive 100"} 
ProductHardwareName     = "NE2000"
NetRuleHardwareType     = "ne2000 ne2000Adapter"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass    = {"ne2000Adapter basic"}
ProductKeyName  = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName    = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
PCMCIADBKeyName = $(!NTN_ServiceBase)"\Pcmcia\DataBase"
KNEPC2Manufacture	= "Kingston"
KNEPC2Model		= "KNE-PC2"

[FileConstantsENG]
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
	       "Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"
FunctionTitle   = "Kingston EtheRx IC PC Card Ethernet Adapter Setup"
ProductSoftwareDescription      = "Kingston EtheRx IC PC Card Ethernet Adapter Driver"
ProductSoftwareTitle            = "Kingston EtheRx IC PC Card Ethernet Adapter Driver"
ProductHardwareKNEPC2Description	= "Kingston EtheRx IC PC Card Ethernet Adapter"
ProductHardwareKNEPC2Title	  = "Kingston EtheRx IC PC Card Ethernet Adapter"
ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."
IRQList  = ^(NE2000IRQChoices, 1)
IRQValues = ^(NE2000IRQChoices, 2)
IOBaseAddrList = ^(NE2000IOBaseAddrChoices, 1)
IOBaseAddrValues = ^(NE2000IOBaseAddrChoices, 2)
NE2000IRQDefault = 3
NE2000IOBaseAddrDefault = 9

[GeneralConstants]
from      = ""
to        = ""
ExitCodeOk     = 0
ExitCodeCancel = 1
ExitCodeFatal  = 2
KeyNull         = ""
MAXIMUM_ALLOWED   = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct      = ""
KeyParameters   = ""
TRUE            = 1
FALSE           = 0
NoTitle            = 0
ExitState   = "Active"
OldVersionExisted = $(FALSE)
DriverPath      = $(!STF_NTPATH)\drivers

[date]
    Now = {} ? $(!LIBHANDLE) GetSystemDate

[Identify]
    set !DebugOutputControl = 1
    read-syms Identification
    set Status     = STATUS_SUCCESSFUL
    set Identifier = $(OptionType)
    set Media      = #("Source Media Descriptions", 1, 1)
    Return $(Status) $(Identifier) $(Media)

[ReturnOptions]
    set !DebugOutputControl = 1
    set Status        = STATUS_FAILED
    set OptionList     = {}
    set OptionTextList = {}
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) in $(LanguageList)
	ifstr(i) $($1) == ""
	   goto returnoptions
	endif
	set PlatformList = ^(PlatformsSupported, 1)
	Ifcontains(i) $($1) in $(PlatformList)
	   goto returnoptions
	else
	   set Status = STATUS_NOTSUPPORTED
	   goto finish_ReturnOptions
	endif
    else
	set Status = STATUS_NOLANGUAGE
	goto finish_ReturnOptions
    endif
returnoptions = +
    set OptionList     = ^(Options, 1)
    set OptionTextList = ^(OptionsText$($0), 1)
    set Status         = STATUS_SUCCESSFUL
finish_ReturnOptions = +
    Return $(Status) $(OptionList) $(OptionTextList)

[InstallOption]
    set !DebugOutputControl = 1
    set Option   = $($1)
    set SrcDir   = $($2)
    set AddCopy  = $($3)
    set DoCopy   = $($4)
    set DoConfig = $($5)
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) NOT-IN $(LanguageList)
	Return STATUS_NOLANGUAGE
    endif
    set-subst LF = "\n"
    read-syms GeneralConstants
    read-syms FileConstants
    read-syms DialogConstants$(!STF_LANGUAGE)
    ifstr(i) $(!NTN_Origination) == "NCPA"
	set Continue = $(OK)
    endif
    read-syms FileConstants$(!STF_LANGUAGE)
    detect date
    set-title  $(FunctionTitle)
    set to   = Begin
    set from = Begin
    set CommonStatus = STATUS_SUCCESSFUL
    EndWait
Begin = +
    Ifstr(i) $(!NTN_InstallMode) == deinstall
	set StartLabel = removeadapter
    else-Ifstr(i) $(!NTN_InstallMode) == Update
	set StartLabel = UpgradeSoftware
    else-Ifstr(i) $(!NTN_InstallMode) == bind
	set StartLabel = bindingadapter
    else-Ifstr(i) $(!NTN_InstallMode) == configure
	set StartLabel = configureadapter
	set CommonStatus = STATUS_REBOOT
		Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
			Debug-Output "Cannot configure the Novell 2000 driver software."
			Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
			ifint $($ShellCode) != $(!SHELL_CODE_OK)
				Debug-Output "ShellCode error: cannot get an error string."
				goto ShellCodeError
			endif
			set Error = $($R0)
			set from = end
			set to = end
			goto nonfatalinfo
		endif
    else
		set StartLabel = installadapter
		set OEM_ABANDON_OPTIONS = {}
		set OEM_ABANDON_SOFTWARE = FALSE
		set OEM_ABANDON_ON = TRUE
    endif

    set from = $(fatal)
    set to = $(fatal)
    goto $(StartLabel)

installadapter = +

    OpenRegKey $(!REG_H_LOCAL) "" $(PCMCIADBKeyName) $(MAXIMUM_ALLOWED) PCMCIADBKey
    ifstr $(PCMCIADBKey) == $(NULL)    
	CloseRegKey $(PCMCIADBKey)      
	Debug-Output "PCMCIA service not present"
	goto nonfatal
    else
	OpenRegKey $(!REG_H_LOCAL) "" $(PCMCIADBKeyName)"\"$($(Option)Manufacture) $(MAXIMUM_ALLOWED) PCMCIA$($(Option)Manufacture)Key
	ifstr $(PCMCIA$($(Option)Manufacture)Key) == $(NULL)
	    debug-output "Adding "$(PCMCIADBKeyName)"\"$($(Option)Manufacture)
	    CreateRegKey $(PCMCIADBKey) {$($(Option)Manufacture), 0, 0} "" $(MAXIMUM_ALLOWED) "" PCMCIA$($(Option)Manufacture)Key
	else 
	    debug-output "Manufacture sub key already exist"
	endif
	OpenRegKey $(!REG_H_LOCAL) "" $(PCMCIADBKeyName)"\"$($(Option)Manufacture)"\"$($(Option)Model) $(MAXIMUM_ALLOWED) PCMCIA$($(Option)Manufacture)$($(Option)Model)Key
	ifstr $(PCMCIA$($(Option)Manufacture)$($(Option)Model)Key) == $(NULL)
	    debug-output "Adding "$(PCMCIADBKeyName)"\"$($(Option)Manufacture)"\"$($(Option)Model)
	    CreateRegKey $(PCMCIA$($(Option)Manufacture)Key) {$($(Option)Model), 0, 0} "" $(MAXIMUM_ALLOWED) "" PCMCIA$($(Option)Manufacture)$($(Option)Model)Key
	    SetRegValue $(PCMCIA$($(Option)Manufacture)$($(Option)Model)Key) {Driver, 0, $(!REG_VT_SZ),"ne2000"}
 	    SetRegValue $(PCMCIA$($(Option)Manufacture)$($(Option)Model)Key) {DeviceType, 0, $(!REG_VT_SZ),"NET"}
	    SetRegValue $(PCMCIA$($(Option)Manufacture)$($(Option)Model)Key) {Option, 0, $(!REG_VT_SZ),"KNEPC2"}
	else
	    debug-output "Device sub key already exist"
	endif
	CloseRegKey $(PCMCIA$($(Option)Manufacture)$($(Option)Model)Key)
	CloseRegKey $(PCMCIA$($(Option)Manufacture)Key)
	CloseRegKey $(PCMCIADBKey)
    endif

    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
	CloseRegKey $(KeyProduct)
	ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
	   Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
	       $(ProductVersion)
	   ifint $($ShellCode) != $(!SHELL_CODE_OK)
	       Debug-Output "ShellCode error: cannot get an error string."
	       goto ShellCodeError
	   endif
	   goto end
	else
	   Shell $(UtilityInf), CardExistedDlg
	   ifint $($ShellCode) != $(!SHELL_CODE_OK)
	       Debug-Output "ShellCode error: cannot get an error string."
	       goto ShellCodeError
	   endif
	   ifstr(i) $($R1) != "OK"
	       set CommonStatus = STATUS_USERCANCEL
	       goto end
	   endif
	   set OldVersionExisted = $(TRUE)
	endif
    endif
    Install "Install-Help"
    set IRQValue = *($(IRQList), $(NE2000IRQDefault))
    set IOBaseAddrValue = *($(IOBaseAddrList), $(NE2000IOBaseAddrDefault))
    goto adapteroptions
configureadapter = +
    Ifstr $(KeyProduct) == $(KeyNull)
	OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
	Ifstr $(KeyProduct) == $(KeyNull)
	    set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
	    Debug-Output "Cannot find component product key"
	    goto fatalregistry
	Endif
    Endif
    Debug-Output "INF: Shelling to FindService"
    Shell $(UtilityInf) FindService, $(KeyProduct)
    Ifint $($ShellCode) != $(!SHELL_CODE_OK)
	Debug-Output "INF: FindService shell failure"
	Goto ShellCodeError
    Endif
    Ifstr(i) $($R0) != NO_ERROR
	Debug-Output "INF: FindService Shell error: "$($R0)
	Goto fatalregistry
    endif
    set KeyParameters = $($R2)
    CloseRegKey $($R1)
    Ifstr $(KeyParameters) == $(KeyNull)
	set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
	Debug-Output "Cannot find component service"
	goto fatalregistry
    endif
    set OldVersionExisted = $(TRUE)
    set ValueName = ""
    set ValueData = ""
    set ValueStr  = ""
    set ValueList = {}
    EnumRegValue $(KeyParameters) ValueList

    ForListDo $(ValueList)
	set ValueItem = $($)
	set ValueName = *($(ValueItem),1)
	set ValueData = *($(ValueItem),4)
	Ifstr(i) $(ValueName) == "InterruptNumber"
	    set IRQValueIndex = $(ValueData)
	else-ifstr(i) $(ValueName) == "IoBaseAddress"
	    set IOBaseAddrIndex = $(ValueData)
	endif
    EndForListDo

    set IRQValue = *($(IRQList), ~($(IRQValues),$(IRQValueIndex)))
    ifstr(i) $(IRQValue) == ""
	set IRQValue = *($(IRQList), 2)
    endif

    set IOBaseAddrValue = *($(IOBaseAddrList), ~($(IOBaseAddrValues),$(IOBaseAddrIndex)))
    ifstr(i) $(IOBaseAddrValue) == ""
	set IOBaseAddrValue = *($(IOBaseAddrList), 1)
    endif

adapteroptions = +
    set from = adapteroptions
    read-syms FileDependentDlg$(!STF_LANGUAGE)
    ui start "InputDlg"
    ifstr(i) $(DLGEVENT) == "CONTINUE"
		set IRQValueIndex = $(Combo1Out)
		set IOBaseAddrIndex = $(Combo2Out)
		ui pop 1
    else-ifstr(i) $(DLGEVENT) == "BACK"
		set CommonStatus = STATUS_USERCANCEL
		Debug-Output "Action: exit. Bye."
		ui pop 1
		goto end
    else
		ui pop 1
		Debug-Output "Action: unknown. Bye."
		goto end
    endif
adapterverify =+
	Goto skipoptions
skipoptions =+
    ifint $(OldVersionExisted) == $(TRUE)
	ifstr(i) $(!NTN_InstallMode) == configure
		goto writeparameters
	endif
    endif
    StartWait
    ifint $(OldVersionExisted) == $(FALSE)
	ifstr(i) $(!NTN_InstallMode) == "install"
		Ifstr(i) $(DoCopy) == "YES"
		    Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
		    Ifint $($ShellCode) != $(!SHELL_CODE_OK)
			Goto ShellCodeError
		    Else-Ifstr(i) $($R0) == STATUS_FAILED
			Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
			ifint $($ShellCode) != $(!SHELL_CODE_OK)
			   goto ShellCodeError
			endif
			set Error = $($R0)
			Goto fatal
		    Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
			Goto successful
		    Endif
		    Set SrcDir = $($R1)
		Endif
		install "Install-Option"
		ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
		    Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
		    ifint $($ShellCode) != $(!SHELL_CODE_OK)
			goto ShellCodeError
		    endif
		    set Error = $($R0)
		    goto fatal
		endif
	endif
       Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
			$(ProductSoftwareName), +
			$(ProductSoftwareName), +
			$(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
			$(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
			$(NetEventDLL)
       Set OEM_ABANDON_SOFTWARE = TRUE
       ifint $($ShellCode) != $(!SHELL_CODE_OK)
	Debug-Output "ShellCode error"
	goto ShellCodeError
       endif
       set RegistryErrorIndex = $($R0)
       set KeyProduct      = $($R1)
       Set SoftNetRulesKey = $($R2)
       CloseRegKey $($R3)
       CloseRegKey $($R4)
       CloseRegKey $($R5)
       Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	EndWait
	Debug-Output "Registry error: add software components"
	CloseRegKey $(KeyProduct)
	CloseRegKey $(SoftNetRulesKey)
	goto fatalregistry
       endif
       set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
		   {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
		   {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
		   {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
		   {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
		   {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
		   {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
       Shell  $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList)
       ifint $($ShellCode) != $(!SHELL_CODE_OK)
	Debug-Output "ShellCode error."
	goto ShellCodeError
       endif
       set RegistryErrorIndex = $($R0)
       Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	EndWait
	Debug-Output "Registry error: add value list."
	CloseRegKey $(KeyProduct)
	CloseRegKey $(SoftNetRulesKey)
	goto fatalregistry
       endif
       set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
			{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
			{bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
			{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
			{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
			{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
       Shell  $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList)
       ifint $($ShellCode) != $(!SHELL_CODE_OK)
	Debug-Output "ShellCode error."
	goto ShellCodeError
       endif
       set RegistryErrorIndex = $($R0)
       CloseRegKey $(KeyProduct)
       CloseRegKey $(SoftNetRulesKey)
       Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	EndWait
	Debug-Output "Resgitry error: add value list."
	goto fatalregistry
       endif
    endif
    Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
    ifint $($R4) != -1
		Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
    endif
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
		Debug-Output "Cannot add hardware component"
		goto ShellCodeError
    endif
    set RegistryErrorIndex = $($R0)
    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
		EndWait
		Debug-Output "Registry error: add hardware component"
		CloseRegKey $($R1)
		CloseRegKey $($R2)
		CloseRegKey $($R3)
		goto fatalregistry
    endif
    set KeyParameters = $($R3)
    set KeyAdapterRules = $($R2)
    set AdapterNumber = $($R4)
    set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
		       {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+
		       {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
		       {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
		       {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
		       {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
    Shell  $(UtilityInf), AddValueList, $($R1), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
		Debug-Output "ShellCode error"
		goto ShellCodeError
    endif
    CloseRegKey $($R1)
    set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
    set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
    set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
			{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
			{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
			{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
    Shell  $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
		Debug-Output "ShellCode error."
		goto ShellCodeError
    endif
    set RegistryErrorIndex = $($R0)
    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
		EndWait
		Debug-Output "Resgitry error: add value list."
		CloseRegKey $(KeyParameters)
		CloseRegKey $(KeyAdapterRules)
		goto fatalregistry
    endif
    CloseRegKey $(KeyAdapterRules)
    goto writeparameters
writeparameters = +
    set IRQValue = *($(IRQValues), ~($(IRQList),$(IRQValueIndex)))
    set IOBaseAddrValue = *($(IOBaseAddrValues), ~($(IOBaseAddrList),$(IOBaseAddrIndex)))
    set NewValueList = {{InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+
		       {BusType,$(NoTitle),$(!REG_VT_DWORD),1},+
		       {BusNumber,$(NoTitle),$(!REG_VT_DWORD),0},+
		       {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
		       {IoBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)},+
		       {Pcmcia,$(NoTitle),$(!REG_VT_DWORD),1},+
		       {IOLength,$(NoTitle),$(!REG_VT_DWORD),31}}
    Shell  $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
    ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
	Shell $(UtilityInf),AddDefaultNetCardParameters,$(KeyParameters)
    endif
    CloseRegKey $(KeyParameters)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
		Debug-Output "ShellCode error."
		goto ShellCodeError
    endif
    set RegistryErrorIndex = $($R0)
    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
		Debug-Output "Registry error: Add value list"
		goto fatalregistry
    endif
    EndWait
    goto successful
bindingadapter =+
    set Error = "Binding: Sorry, not yet implemented."
    goto fatal
removeadapter = +
    Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
		Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
				$(ProductSoftwareName)
		ifint $($ShellCode) != $(!SHELL_CODE_OK)
				Debug-Output "ShellCode error"
				goto ShellCodeError
		endif
		set RegistryErrorIndex = $($R0)
		Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
				goto fatalregistry
		endif
    else
		Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
			$(ProductSoftwareName), $(!NTN_RegBase)
		ifint $($ShellCode) != $(!SHELL_CODE_OK)
				Debug-Output "ShellCode error"
				goto ShellCodeError
		endif
		set RegistryErrorIndex = $($R0)
		Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
				goto fatalregistry
		endif
    endif
    goto end
UpgradeSoftware = +
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
	install "Install-Update"
	ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
	    goto fatal
	endif
	SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
	SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
	CloseRegKey $(KeyProduct)
    else
	goto fatalregistry
    endif
    goto end
successful = +
    goto end
abandon = +
    ForListDo $(OEM_ABANDON_OPTIONS)
	Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName), $($)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    Debug-Output "ShellCode error"
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    goto fatalregistry
	endif
    EndForListDo
    Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
	Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName), FALSE
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    Debug-Output "ShellCode error"
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    goto fatalregistry
	endif
    endif
    goto end
warning = +
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
	goto $(to)
    else-ifstr(i) $($R1) == "CANCEL"
	goto $(from)
    else
	goto "end"
    endif
nonfatalinfo = +
    Set CommonStatus = STATUS_USERCANCEL
    Set Severity = STATUS
    goto nonfatalmsg
nonfatal = +
    Set Severity = NONFATAL
    goto nonfatalmsg
nonfatalmsg = +
    ifstr(i) $(Error) == ""
	Set Severity = NONFATAL
	Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
	goto $(from)
    else
	goto "end"
    endif
fatalregistry = +
    Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    set Error = $($R0)
    goto fatal
fataldetect = +
    Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	Debug-Output "ShellCode error: cannot get an error string."
	goto ShellCodeError
    endif
    set Error = $($R0)
    Goto fatal
fatal = +
    ifstr(i) $(Error) == ""
	Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    goto setfailed
ShellCodeError = +
    set DlgType      = "MessageBox"
    set STF_MB_TITLE = $(ShellCodeErrorTitle)
    set STF_MB_TEXT  = $(ShellCodeErrorText)
    set STF_MB_TYPE  = 1
    set STF_MB_ICON  = 3
    set STF_MB_DEF   = 1
    ui start "Error Message"
    goto setfailed
setfailed = +
    set CommonStatus = STATUS_FAILED
    ifstr(i) $(OEM_ABANDON_ON) == TRUE
	set OEM_ABANDON_ON = FALSE
	goto abandon
    endif
    goto end
end = +
    goto term
term = +
    Return $(CommonStatus)

[Install-Option]
    set STF_VITAL = ""
    ifstr(i) $(AddCopy) == "YES"
	AddSectionFilesToCopyList Files-NE2000 $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
    endif
    ifstr(i) $(DoCopy) == "YES"
       set !STF_NCPA_FLUSH_COPYLIST = TRUE
       CopyFilesInCopyList
    endif
    ifstr(i) $(DoConfig) == "YES"
    endif
    Exit
[Install-Update]
   set STF_VITAL        = ""
   set STF_OVERWRITE    = "VERIFYSOURCEOLDER"
   AddSectionFilesToCopyList Files-NE2000 $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
   exit
[Source Media Descriptions]
    1 = "Kingston EtheRx IC PC Card Ethernet Adapter Setup Disk" , TAGFILE = ktcpc2.id

[Signature]
    FileType = MICROSOFT_FILE
[GetSignature]
    read-syms Signature
    return $(FileType)

[ProductType]
STF_PRODUCT  = Winnt
STF_PLATFORM = I386

[Files-Inf]
1,      oemsetup.inf,    SIZE=1000,     RENAME=$(!UG_Filename)

[Files-NE2000]
1,      NE2000.SYS ,     SIZE=999

[LanguagesSupported]
    ENG

[DialogConstantsENG]
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"

[FileDependentDlgENG]
Label1 = "&IRQ Level:"
Label2 = "I/O &Port Address:"
DlgType = "RadioCombination"
DlgTemplate = "NE2000"
Caption = $(FunctionTitle)
Combo1List = $(IRQList)
Combo1Out  = $(IRQValue)
Combo2List = $(IOBaseAddrList)
Combo2Out  = $(IOBaseAddrValue)
ComboListItemsIn  = {Combo1List, Combo2List}
ComboListItemsOut = {Combo1Out, Combo2Out}
EditTextIn = ""
EditTextLim = ""
CBOptionsGreyed = {}
NotifyFields = {NO, NO}
HelpContext = 100

[NE2000IRQChoices]
IRQ_1 = "3",3
IRQ_2 = "4",4
IRQ_3 = "5",5
IRQ_4 = "7",7
IRQ_5 = "9",9
IRQ_6 = "10",10
IRQ_7 = "11",11
IRQ_8 = "12",12
IRQ_9 = "15",15

[NE2000IOBaseAddrChoices]
IOBase_1  = "0x200",512
IOBase_2  = "0x220",544
IOBase_3  = "0x240",576
IOBase_4  = "0x260",608
IOBase_5  = "0x280",640
IOBase_6  = "0x2A0",672
IOBase_7  = "0x2C0",704
IOBase_8  = "0x2E0",736
IOBase_9  = "0x300",768
IOBase_10  = "0x320",800
IOBase_11  = "0x340",832
IOBase_12  = "0x360",864
IOBase_13  = "0x380",896
IOBase_14  = "0x3A0",928
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 0.76