Readme for TeleWell PCI ISDN under Windows Me/98 ************************************************ 1. Alterations against manual: ----------------------------------- 1.1 Updating from previous version: Please run SETUP98.EXE to check the system for previous installed version of TeleWell PCI ISDN. If previous version is detected please follow the instructions given by the setup program. The setup program will uninstall previous version first. After rebooting the PC Windows will detect the TeleWell PCI ISDN hardware again. Then please run installation as described in the manual. Hint: "Update Driver" function from Windows control panel is not supported. 1.2 a-law/µ-law switch: a-law/µ-law selection is made automatically by selected D-Channel protocol. You may override this automatic selection by using this configuration switch. To change this setting open the network control panel and display the properties of the 'TeleWell PCI ISDN'. Switch to the 'advanced' tab on the property pages and select 'a/b Speech coding'. Change the value to your needs. You will have to reboot before the change will take effect. 2. Limitations / Known issues: ------------------------------------ 2.1. Installation under Windows Me/98: If the Microsoft Dial-Up-Networking was not installed at any time on your Windows 98 system it will be installed automatically during the installation of the TeleWell PCI ISDN. If you had installed the Microsoft Dial-Up-Networking any time before on your Windows Me/98 system but it isn't installed anymore please use the Add/Remove programs control panel to install the Dial-Up-Networking. Copyright TeleWell 2000/12/06Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.