release_note.txt Driver File Contents (AtL2Linux_v0.2.40.0.zip)

0.2.40.0
    1. Fix the checking of packet size on RX(at_intr_rx)
    2. Remove NETIF_F_HW_CSUM bit in the field, net_device::features
       (Hyperion don't support hardware checksum calculation.)
    3. Fix module description string in at_main.c
    4. Fix module parameter descriptions in the file, readme.

0.1.40.0
    1. Apply the new version rule. The code is the same with 1.01.06.

v0006
    1. change media type user selection
    2. do not config phy register 0x10, or it will not link up on force 10F

v0005
    1. fixed vlan id problem

v0004
    1. support new PHY's op <let it leave reset state when POWERON>
    2. clear PHY's root cause interrupt 

v0003
    1. fixed RXD base Address alignment <(128-8)bytes>

v0002
    1. fixed TXD memory wrap when copy packet from system to
       TXD memory.

V0001
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 1.87