The Driver Installation of CN30BC for Windows-95 Steps : (1) Insert the PCMCIA Type II Ethernet adapter into your computer's Type II PC card slot. (2) Connect the Media Coupler to the adapter's 15-pin connector. (3) Connect the network cable to the RJ-45 or BNC connector on the Media Coupler. [Refer to user's manual for exact instructions] (4) Turn on the computer to run Windows-95. (5) When "New Hard Found" window shows up, select "Driver from disk provided by hardware manufacture" and click "OK" . (6) When "Install From Disk" window shows up, insert the driver disk and give the drive path in the box (For example, A:\Win95 or B:\ Win95) and click "OK" . (7) When "Select Drive" window shows up, models is the "CNet Ethernet PCMCIA 30BC card" , and click "OK" . (8) When "Insert Disk" window shows up, click "OK" and type a correct path to load the *.dll files. [i.e. D:\Win95 for CD-ROM] (9) When "System Setting Change" window shows up, the installation is done. Remove your installation disk, click "Yes" to restart the Windows-95, and 30BC will connect the network.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.