;------------------------------------------------------------------ ; ; This INF file is used to install a PCMCIA Ethernet card to your ; system. We provide a CIS overrided information in order to ; configurate IRQ correctly. ;-------------------------------------------------------------------- [Version] Signature=$CHICAGO$ Class=Net Provider=%String0% LayoutFile=layout.inf [ClassInstall] [DestinationDirs] DefaultDestDir=11 CN30.CopyFiles=11 [Manufacturer] %String1%=CNet [CNet] %String2%=CN30.Install,PCMCIA\PMX-PE-200-F3CA,PMX-PE-200-F3CA [CN30.Install] CopyFiles=CN30.CopyFiles AddReg=CNet.Add.Reg,CNet.Drv.Parms, CNet.CIS.Override Restart [CN30.CopyFiles] pmxpe.vxd [CNet.Add.Reg] HKR,Ndi,DeviceID,0,PCMCIA\PMX___-PE-200-F3CA HKR,,DevLoader,0,*ndis HKR,,DeviceVxDs,0,pmxpe.vxd HKR,,EnumPropPages,0,netdi.dll HKR,NDIS,LogDriverName,0,pmxpe HKR,NDIS,MajorNdisVersion,1,03 HKR,NDIS,MinorNdisVersion,1,0a HKR,Ndi\Interfaces,DefUpper,0,ndis3 HKR,Ndi\Interfaces,DefLower,0,ethernet HKR,Ndi\Interfaces,UpperRange,0,ndis3 HKR,Ndi\Interfaces,LowerRange,0,ethernet HKR,NDI,CardType,0,PCMCIA [CNet.Drv.Parms] HKR,,InterruptNumber,1,04,00,00,00 HKR,,IOBaseAddress,1,02,00,00,00 HKR,NDI\params\InterruptNumber,resc,1,04,00,00,00 HKR,Ndi\params\interruptNumber,ParamDesc,0,InterruptLevel HKR,NDI\params\InterruptNumber,flag,1,20,00,00,00 HKR,NDI\params\IOBaseAddress,resc,1,02,00,00,00 HKR,NDI\params\IOBaseAddress,ParamDesc,0,I/OBaseAddress HKR,NDI\params\IOBaseAddress,flag,1,20,00,00,00 [CNet.CIS.Override] ;---------------------------------------------------------------- ; Resource override information ;---------------------------------------------------------------- HKR,Override,0000,1,\ ; ; CONFIGMG_VERSION ; 00,04,00,00, \ ; ; PRIORITY ; 00,30,00,00, \ ;------------------------------------------------------------- ; I/O Resource Descriptor ;------------------------------------------------------------- 24,00,00,00, \ ; Total length of I/O Resource Descriptor 02,00,00,00, \ ; ResType_IO = 0x00000002 01,00, \ ; IOD_Count; 0C,00, \ ; IOD_Type; // IOType_Range = 0x000C 00,00, \ ; IOD_Alloc_Base; 00,00, \ ; IOD_Alloc_End; 00,00, \ ; IOD_DesFlags; 00, \ ; IOD_Alloc_Alias; 00, \ ; IOD_Alloc_Decode; F0,FF, \ ; IOR_Align; // Mask for base alignment 10,00, \ ; IOR_nPorts; // Number of ports 00,03, \ ; IOR_Min; // Min port address 0F,03, \ ; IOR_Max; // Max port address 00,00, \ ; IOR_RangeFlags; // Flags 00, \ ; IOR_Alias; // Alias offset 00, \ ; IOR_Decode; // Address specified 40,00,00,00, \ ; PCCARD flags, 0x40 = 16-bit port ;------------------------------------------------------------- ; I/O Resource Descriptor ;------------------------------------------------------------- 24,00,00,00, \ ; Total length of I/O Resource Descriptor 02,00,00,00, \ ; ResType_IO = 0x00000002 01,00, \ ; IOD_Count; 0C,00, \ ; IOD_Type; // IOType_Range = 0x000C 00,00, \ ; IOD_Alloc_Base; 00,00, \ ; IOD_Alloc_End; 00,00, \ ; IOD_DesFlags; 00, \ ; IOD_Alloc_Alias; 00, \ ; IOD_Alloc_Decode; F0,FF, \ ; IOR_Align; // Mask for base alignment 10,00, \ ; IOR_nPorts; // Number of ports 10,03, \ ; IOR_Min; // Min port address 1F,03, \ ; IOR_Max; // Max port address 00,00, \ ; IOR_RangeFlags; // Flags 00, \ ; IOR_Alias; // Alias offset 00, \ ; IOR_Decode; // Address specified 40,00,00,00, \ ; PCCARD flags, 0x40 = 16-bit port ;------------------------------------------------------------------------- ; IRQ Resource Descriptor ;------------------------------------------------------------------------- 14,00,00,00, \ ; Total length of IRQ Resource Descriptor 04,00,00,00, \ ; ResType_IRQ = 0x00000004 00,00, \ ; IRQD_Flags; 00,00, \ ; IRQD_Alloc_Num; // Allocated IRQ number B6,FC, \ ; IRQD_Req_Mask; // Mask of possible IRQs 00,00, \ ; IRQD_Reserved; 20,00,00,00, \ ; PCCARD flags, 0x20 = Level mode int’s ;------------------------------------------------------------------------- ; This field need to be filled for PCMCIA card ; ; REQUEST_CONFIG_PKT Descriptor ; ;-------------------------------------------------------------------------- 19,00,00,00, \ ; Length of REQUEST_CONFIG_PKT Descriptor 7C,89,00,00, \ ; ResType_Ignored_Bit+PCCARD_DEVICE_ID= 0x897C 00,00, \ ; Socket; 02,00, \ ; Attributes; 32, \ ; Vcc; 32, \ ; Vpp1; 32, \ ; Vpp2; 02, \ ; IntType; 00,01,00,00, \ ; ConfigBase; 00, \ ; Status; 00, \ ; Pin; 00, \ ; Copy; 00, \ ; ConfigIndex; 01, \ ; Present; ; 00,00,00,00 ; TERMINATOR [ControlFlags] [Strings] String0="CNet" String1="CNet Technology Inc.," String2="CNet Ethernet PCMCIA 30BC Card"Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.