en60c.inf Driver File Contents (W95-98.exe)

;
; $RCSfile: ss.inf,v $ $Revision: 1.22.2.8 $
;

[Version]
Signature="$CHICAGO$"
Provider=%MS%
ClassGUID={4d36e971-e325-11ce-bfc1-08002be10318}
Class=Net

;*******************************************************************************

[Manufacturer]
%V_ENI%=ENI_devices

; PNP cards should be excluded from select
[ControlFlags]
ExcludeFromSelect = \
	PCI\VEN_111A&PKG_PCI_25_6_HB_WIN95_DEVICE_ID&SUBSYS_99999999&REV_07
;the above line is a filler only used to terminate the exclude from select list

[ENI_devices]
; These are the device ID's supported by this inf
%PCI\VEN_111A&DEV_0005&SUBSYS_0009111A.DeviceDesc%=3060.ndi,PCI\VEN_111A&DEV_0005&SUBSYS_0009111A
%PCI\VEN_111A&DEV_0005&SUBSYS_0809111A.DeviceDesc%=3060a.ndi,PCI\VEN_111A&DEV_0005&SUBSYS_0809111A
%PCI\VEN_111A&DEV_0005&SUBSYS_0A09111A.DeviceDesc%=3060b.ndi,PCI\VEN_111A&DEV_0005&SUBSYS_0A09111A

[SourceDisksNames]
; disk#="disk description",disk-label,disk-serial-number
1=%DiskName%,,0

[SourceDisksFiles]
; filename=disk#[,subdir]
en60c.vxd=1
en60cc16.dll=1
en60c.hlp=1
en60c.cnt=1
en60ccfg.exe=1
en60cevt.dll=1
en60cmsg.vxd=1
en60cmsg.exe=1
en60cdtc.vxd=1
en60ctb.exe=1
en60ccpl.cpl=1

;*******************************************************************************

; Run when the user picks the device out of the list







[3060.ndi]
MaxInstance=4
AddReg=3060.ndi.reg,ENI.ndi.reg
DeviceID=PCI\VEN_111A&DEV_0005&SUBSYS_0009111A
CopyFiles=ENI.CopyFiles.Dll,ENI.CopyFiles.Inf,ENI.CopyFiles,ENI.CopyFiles.Hlp,EN60C.CopyFiles.ACF, ENI.CopyFiles.Shared

[3060a.ndi]
MaxInstance=4
AddReg=3060a.ndi.reg,ENI.ndi.reg
DeviceID=PCI\VEN_111A&DEV_0005&SUBSYS_0809111A
CopyFiles=ENI.CopyFiles.Dll,ENI.CopyFiles.Inf,ENI.CopyFiles,ENI.CopyFiles.Hlp,EN60C.CopyFiles.ACF, ENI.CopyFiles.Shared

[3060b.ndi]
MaxInstance=4
AddReg=3060b.ndi.reg,ENI.ndi.reg
DeviceID=PCI\VEN_111A&DEV_0005&SUBSYS_0A09111A
CopyFiles=ENI.CopyFiles.Dll,ENI.CopyFiles.Inf,ENI.CopyFiles,ENI.CopyFiles.Hlp,EN60C.CopyFiles.ACF, ENI.CopyFiles.Shared


[ENI.Install]
; Run when user accepts the install
AddReg=ENI.Install.reg

;*******************************************************************************

[ENI.ndi.reg]
; NDIS Info
HKR,NDIS,LogDriverName,,"EN60C"
HKR,NDIS,MajorNdisVersion,HEX,03
HKR,NDIS,MinorNdisVersion,HEX,0A
; Interfaces
HKR,Ndi\Interfaces,DefUpper,,"ndis3"
HKR,Ndi\Interfaces,DefLower,,"ethernet"
HKR,Ndi\Interfaces,UpperRange,,"ndis3"
HKR,Ndi\Interfaces,LowerRange,,"ethernet"
; Install sections
HKR,Ndi\Install,ndis3,,"ENI.Install"
;HKR,Ndi\Remove,,,"ENI.Remove"
HKR,Ndi,NdiInstaller,,"EN60CC16.DLL,NdiProc"
HKR,Ndi,HelpText,,%ENI_Help%
HKR,,EnumPropPages,,"netdi.dll,EnumPropPages"
; Port Hive
HKLM,System\CurrentControlSet\Services\VxD\EN60C,ProductName,,"SpeedStream 3060 CIP/1483"
HKLM,System\CurrentControlSet\Services\VxD\EN60C,ProductVersion,,"1.3.0"
HKLM,System\CurrentControlSet\Services\VxD\EN60C,ProductBuild,,"(3)"
HKLM,System\CurrentControlSet\Services\VxD\EN60C,Signature,,"EN60C"





[3060.ndi.reg]
HKR,Ndi,DeviceID,,"PCI\VEN_111A&DEV_0005&SUBSYS_0009111A"
HKLM,System\CurrentControlSet\Services\VxD\EN60C,SubSystem,,"SUBSYS_0009111A"
HKR,,SubsysId,,9
HKLM,System\CurrentControlSet\Services\VxD\EN60C,HWDescription ,,"Efficient Networks 3060 (PCI Bus 3060 DMT Adapter)"

[3060a.ndi.reg]
HKR,Ndi,DeviceID,,"PCI\VEN_111A&DEV_0005&SUBSYS_0809111A"
HKLM,System\CurrentControlSet\Services\VxD\EN60C,SubSystem,,"SUBSYS_0809111A"
HKR,,SubsysId,,0x809
HKLM,System\CurrentControlSet\Services\VxD\EN60C,HWDescription ,,"Efficient Networks 3060 (PCI Bus 3060 DMT Adapter)"

[3060b.ndi.reg]
HKR,Ndi,DeviceID,,"PCI\VEN_111A&DEV_0005&SUBSYS_0A09111A"
HKLM,System\CurrentControlSet\Services\VxD\EN60C,SubSystem,,"SUBSYS_0A09111A"
HKR,,SubsysId,,0xA09
HKLM,System\CurrentControlSet\Services\VxD\EN60C,HWDescription ,,"Efficient Networks 3060 (PCI Bus 3060 DMT Adapter)"



[ENI.Install.reg]
HKR,,DevLoader,,*ndis
HKR,,DeviceVxDs,,EN60C.vxd
HKLM,"SOFTWARE\Efficient Networks\SpeedStream Adapter Software for 3060 CIP/1483\1.3.0",build,,(3)
HKR,,,,"EN60C"

[ENI.CopyFiles.Dll]
EN60CC16.DLL

[ENI.CopyFiles]
en60c.vxd
en60ccfg.exe
en60ctb.exe
en60ccpl.cpl
en60cevt.dll
en60cmsg.vxd
en60cmsg.exe
en60cdtc.vxd

[ENI.CopyFiles.Inf]
en60c.inf

[ENI.CopyFiles.Hlp]
en60c.hlp
en60c.cnt

[ENI.CopyFiles.Shared]
MFC42.DLL,,,32
MSVCRT.DLL,,,32
EN60CSS.DLL,,,32

[DestinationDirs]
DefaultDestDir=11		; system directory
ENI.CopyFiles.Inf=17    ; inf directory
ENI.CopyFiles.Hlp=18    ; help directory
EN60C.CopyFiles.ACF=11, ACF\EN60C    ; ACF directory

;*******************************************************************************
;The following section is used to get versioning information about the
; INF file itself. Use GetPrivateProfileString() to get this information.
;*******************************************************************************

[StringVersionInfo]
CompanyName=Efficient Networks, Inc.
FileDescription=Windows 95 INF installation file
FileVersion=$Revision: 1.22.2.8 $
ProductName=SpeedStream 3060 CIP/1483
ProductVersion=1.3.0
EmailSupport=support@efficient.com
HotLineSupport=(972) 991-3889
LegalCopyright=Copyright © Efficient Networks, Inc. 1999
Signature=EN60C
ProductBuild=(3)

;*******************************************************************************

[Strings]
MS="Microsoft"
V_ENI="Efficient Networks"
DiskName="Efficient SpeedStream Driver Diskette"

PCI\VEN_111A&DEV_0005&SUBSYS_0009111A.DeviceDesc="Efficient Networks 3060 SpeedStream Adapter"
PCI\VEN_111A&DEV_0005&SUBSYS_0809111A.DeviceDesc="Efficient Networks 3060 SpeedStream Adapter"
PCI\VEN_111A&DEV_0005&SUBSYS_0A09111A.DeviceDesc="Efficient Networks 3060 SpeedStream Adapter"

ENI_Help="The Efficient Networks adapter driver enables your network components to use a high speed ADSL network."
[EN60C.CopyFiles.ACF]
MAGIX1~1.ACF
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 0.93