INI_VERSION=9.3
#------------------------------------------------------------------------
# The script file for Telstar-7 8MB chain.
#
# Created by Boris Reifman on 11/17/2000 boris.reifman@starband.com
#
# Modification History:
#
# 11/21/00 - B. Reifman - Changed PGM_MINUTES setting from 1 to 0
#------------------------------------------------------------------------
#
#
# See HOWTO.ini file for a detailed description of each parameter and a
# script language.
#
prelabel=SBD
CONFIGURATION=SBD 9_26_00
INI_MINUTES=0
PGM_MINUTES=0
INPUT_TYPE=ZIPCODE
HUB_LATITUDE=39.00 N
HUB_LONGITUDE=77.00 W
SATELLITE_POSITION=129.0 W
BACKUP_HUB_LATITUDE=41.85N
BACKUP_HUB_LONGITUDE=87.65 W
BACKUP_SATELLITE_POSITION=129.0 W
TIMEOUT=120
TIME_SLOT_DURATION=62134
# specify Inbound rate as divided by 100: i.e, rate 4800 -> INBOUND_RATE=48
INBOUND_RATE=768
# specify Outbound rate in full: i.e., rate 64000 -> OUTBOUND_RATE=64000
OUTBOUND_RATE=8192000
endprelabel
# ---------------------------------------------------------------
# The programming script begins here
# ---------------------------------------------------------------
start
set usat_group_address "8193"
set outbound_rate "8192"
set outbound_rate_test "8192"
set outbound_modulation "Q"
set outbound_reed_solomon "Y"
set time_slot_duration "62134"
set outbound_id "12ed"
set out_code_rate_1/4 "N"
set out_code_rate_n/4 "2"
set out_code_rate_n/4_test "1/2"
set interleaver_id "0"
set establish_link "Y"
set inbound_modulation "M"
set inbound_rate_ra "76800"
set dual_inbound_rate "N"
set inbound_reed_solomon "N"
set inbound_convolution "Y"
set inbound_ra_frame_length "442"
set inbound_da_frame_length "442"
set k_for_inb_coding "7"
set hpp_id "4"
set hsp_link_number "63"
set load_probe "N"
set installation_password "123"
set main_outbound_frequency "1178"
set main_channel_delay ""
set main_inbound_reference_frequency "1178280"
set main_inbound_idle_frequency "0"
set number_of_day_inbound_bands "1"
set day_inbound_band_1_start_frequency "1184880"
set day_inbound_band_1_stop_frequency "1189920"
set number_of_night_inbound_bands "1"
set night_inbound_band_1_start_frequency "1184880"
set night_inbound_band_1_stop_frequency "1189920"
set inbound_initial_frequency "1187400"
set inbound_initial_offset "0"
set backup_outbound_frequency "1178"
set backup_channel_delay ""
set backup_inbound_reference_frequency "1178280"
set backup_inbound_idle_frequency "0"
set number_of_backup_day_inbound_bands "1"
set backup_day_inbound_band_1_start_frequency "1184880"
set backup_day_inbound_band_1_stop_frequency "1189920"
set number_of_backup_night_inbound_bands "1"
set backup_night_inbound_band_1_start_frequency "1184880"
set backup_night_inbound_band_1_stop_frequency "1189920"
set backup_inbound_initial_frequency "1187400"
set hsp_port_for_wagers "63"
set hsp_port_for_management "63"
# These parameters are assumed by default
set port_configuration "02"
set enable_dial_backup "N"
set port_mode "1"
set dial_backup_speed "2400"
set primary_dial_backup_number ""
set secondary_dial_backup_number ""
set enable_download "N"
set enable_high_concentration_mode "N"
set da_time-slots "2"
set usat_group2_address "20"
set hardware_version ""
set support_high_speed_inbound_mode "Y"
calculate_delays
beep
set inbound_initial_offset "0"
# Remove the pound sign (#) in the next line to ask for the INBOUND INITIAL OFFSET
#loadv inbound_initial_offset "Please enter the Inbound Initial Offset"
status "Turn on switches 1, 7 and 8 on the IDU"
status "then turn the IDU power ON . . . "
message "Turn the IDU power ON . . . "
TIMEOUT 0
loop_begin
loop_waitfor "... "
sendcr
loop_continue
loop_waitfor "> "
sendcr
loop_continue
loop_waitfor "(Y/N)"
sendcr
loop_continue
loop_waitfor "RPP simulator is active"
message "Please wait while erasing flash . . ."
status "Erasing flash"
pause 3
send "20"
loop_break
loop_end
waitfor "Please enter ..."
send "1"
waitfor "from sector"
send "1"
waitfor "to sector"
send "15"
waitfor "Please enter ..."
send "8"
pause 1
send "22"
status "Setting defaults"
case "-> USAT OWN ADDRESS" address "Enter the terminal SERIAL number" send-serial
label address
TIMEOUT 5
waitfor "< 128 .. 16382 > "
send "499068"
case "Enter the terminal SERIAL number" serial "Set TEST frequencies" test-freq
label test-freq
waitfor "< Y/N > ... "
send "N"
label serial
saveserial# "[" "]"
waitfor "(decimal) ... "
send "0"
loop_begin
loop_waitfor "... "
sendcr
loop_continue
loop_waitfor "> "
sendcr
loop_continue
loop_waitfor "(Y/N)"
sendcr
loop_continue
loop_waitfor "RPP simulator is active"
message "Please wait while the IDU resets . . ."
pause 3
send "22"
loop_break
loop_end
TIMEOUT 60
status "Reseting IDU..."
waitfor "Enter the terminal SERIAL number"
label send-serial
TIMEOUT 5
waitfor "(decimal) ... "
sendserial#
waitfor "Enter HARDWARE version"
waitfor "(hex) ... "
sendcr
waitfor "-> USAT OWN ADDRESS"
waitfor "< 128 .. 16382 > "
sendhex "03"
status "Setting parameters..."
# waitfor "-> USAT OWN ADDRESS"
# waitfor "> "
# send "3921000"
set satellite ""
set satellite2 ""
loop_begin
loop_waitfor "MAIN satellite parameters:"
set satellite "MAIN"
set satellite2 "MAIN"
loop_continue
loop_waitfor "BACKUP satellite parameters:"
set satellite "BACKUP"
set satellite2 "BACKUP"
loop_continue
loop_waitfor "DAY parameters: (of MAIN satellite)"
set satellite "MAIN_DAY"
loop_continue
loop_waitfor "NIGHT parameters: (of MAIN satellite)"
set satellite "MAIN_NIGHT"
loop_continue
loop_waitfor "DAY parameters: (of BACKUP satellite)"
set satellite "BACKUP_DAY"
loop_continue
loop_waitfor "NIGHT parameters: (of BACKUP satellite)"
set satellite "BACKUP_NIGHT"
loop_continue
loop_waitfor "Set Gtech RPP application"
waitfor "(Y/N)"
send "Y"
loop_continue
loop_waitfor "Set Gtech RPP default parameters"
waitfor "(Y/N)"
send "Y"
message "Please wait while the defaults are loaded . . ."
loop_continue
loop_waitfor "Modify existing RPP parameters"
waitfor "(Y/N)"
send "Y"
loop_continue
loop_waitfor "-> USAT OWN ADDRESS"
waitfor "> "
sendidu#
loop_continue
loop_waitfor "-> USAT GROUP ADDRESS"
waitfor "> "
sendv usat_group_address
loop_continue
loop_waitfor "-> OUTBOUND RATE"
waitfor "> "
sendv outbound_rate
loop_continue
loop_waitfor "-> OUTBOUND REED SOLOMON"
waitfor ">"
sendv outbound_reed_solomon
loop_continue
loop_waitfor "-> OUTBOUND MODULATION"
waitfor "> "
sendv outbound_modulation
loop_continue
loop_waitfor "-> TIME-SLOT DURATION"
waitfor ": "
sendv time_slot_duration
loop_continue
loop_waitfor "-> INBOUND CONVOLUTION"
waitfor ">"
sendv inbound_convolution
loop_continue
loop_waitfor "-> INBOUND RA FRAME LENGTH"
waitfor ":"
sendv inbound_ra_frame_length
loop_continue
loop_waitfor "-> INBOUND DA FRAME LENGTH"
waitfor ":"
sendv inbound_da_frame_length
loop_continue
loop_waitfor "-> OUTBOUND ID"
waitfor "> "
sendv outbound_id
loop_continue
loop_waitfor "-> OUT CODE RATE 1/4"
waitfor "< Y/N > "
sendv out_code_rate_1/4
loop_continue
loop_waitfor "-> OUT CODE RATE n/4"
waitfor ">"
sendv out_code_rate_n/4
loop_continue
loop_waitfor "-> INTERLEAVER ID"
waitfor ">"
sendv interleaver_id
loop_continue
loop_waitfor "-> ESTABLISH LINK"
waitfor "< Y/N > "
sendv establish_link
loop_continue
loop_waitfor "-> INBOUND MODULATION"
waitfor "< M/D > "
sendv inbound_modulation
loop_continue
loop_waitfor "-> SUPPORT HIGH SPEED INBOUND MODE"
waitfor "< Y/N > "
sendv support_high_speed_inbound_mode
loop_continue
loop_waitfor "-> INBOUND RATE RA"
waitfor "> "
sendv inbound_rate_ra
loop_continue
loop_waitfor "-> K FOR INB CODING"
waitfor "> "
sendv k_for_inb_coding
loop_continue
loop_waitfor "-> HPP ID"
waitfor ">"
sendhppid#
loop_continue
loop_waitfor "-> HSP LINK NUMBER"
waitfor ">"
sendv hsp_link_number
loop_continue
loop_waitfor "-> LOAD PROBE"
waitfor ">"
sendv load_probe
loop_continue
loop_waitfor "-> DUAL INBOUND RATE"
waitfor "> "
sendv dual_inbound_rate
loop_continue
loop_waitfor "-> INBOUND REED SOLOMON"
waitfor ">"
sendv inbound_reed_solomon
loop_continue
loop_waitfor "-> Enter installation PASSWORD : "
sendv installation_password
loop_continue
loop_waitfor "Do you want to change password"
waitfor "> ... "
send "N"
loop_continue
loop_waitfor "-> HSP port for wagers"
waitfor "> "
sendv hsp_port_for_wagers
loop_continue
loop_waitfor "-> HSP port for management"
waitfor "> "
sendv hsp_port_for_management
loop_continue
loop_waitfor "-> Port configuration"
waitfor "> "
sendv port_configuration
loop_continue
loop_waitfor "-> Enable dial backup"
waitfor "< Y/N > "
sendv enable_dial_backup
loop_continue
loop_waitfor "Port mode"
waitfor "pulse > "
sendv port_mode
loop_continue
loop_waitfor "Dial backup speed"
waitfor " > "
sendv dial_backup_speed
loop_continue
loop_waitfor "Primary dial backup number"
waitfor "#* > "
sendv primary_dial_backup_number
loop_continue
loop_waitfor "Secondary dial backup number"
waitfor "#* > "
sendv secondary_dial_backup_number
loop_continue
loop_waitfor "Enable download"
waitfor "< Y/N > "
sendv enable_download
loop_continue
loop_waitfor "-> Enable high concentration mode"
waitfor "< Y/N > "
sendv enable_high_concentration_mode
loop_continue
loop_waitfor "-> DA Time-Slots"
waitfor "> "
sendv da_time-slots
loop_continue
loop_waitfor "-> USAT Group 2 Address"
waitfor "> "
sendv usat_group2_address
loop_continue
loop_waitfor "Set RSP default parameters"
waitfor "(Y/N)"
send "Y"
loop_continue
loop_waitfor "-> OUTBOUND frequency"
waitfor "> (MHz) "
IF_EQUAL satellite "MAIN"
sendv main_outbound_frequency
IF_END
IF_EQUAL satellite "BACKUP"
sendv backup_outbound_frequency
IF_END
loop_continue
loop_waitfor "-> channel DELAY"
waitfor "> (x 0.1mSec) "
IF_EQUAL satellite "MAIN"
senddelay#
IF_END
IF_EQUAL satellite "BACKUP"
sendbackupdelay#
IF_END
loop_continue
loop_waitfor "-> inbound REFERENCE frequency"
waitfor "> (KHz) "
IF_EQUAL satellite "MAIN"
sendv main_inbound_reference_frequency
IF_END
IF_EQUAL satellite "BACKUP"
sendv backup_inbound_reference_frequency
IF_END
loop_continue
loop_waitfor "-> inbound IDLE frequency"
waitfor "> (KHz) "
IF_EQUAL satellite "MAIN"
sendv main_inbound_idle_frequency
IF_END
IF_EQUAL satellite "BACKUP"
sendv backup_inbound_idle_frequency
IF_END
loop_continue
loop_waitfor "-> NUMBER of inbound bands"
waitfor "> "
IF_EQUAL satellite "MAIN_DAY"
sendv number_of_day_inbound_bands
IF_END
IF_EQUAL satellite "MAIN_NIGHT"
sendv number_of_night_inbound_bands
IF_END
IF_EQUAL satellite "BACKUP_DAY"
sendv number_of_backup_day_inbound_bands
IF_END
IF_EQUAL satellite "BACKUP_NIGHT"
sendv number_of_backup_night_inbound_bands
IF_END
loop_continue
loop_waitfor "START frequency"
waitfor "> "
IF_EQUAL satellite "MAIN_DAY"
sendv day_inbound_band_1_start_frequency
IF_END
IF_EQUAL satellite "MAIN_NIGHT"
sendv night_inbound_band_1_start_frequency
IF_END
IF_EQUAL satellite "BACKUP_DAY"
sendv backup_day_inbound_band_1_start_frequency
IF_END
IF_EQUAL satellite "BACKUP_NIGHT"
sendv backup_night_inbound_band_1_start_frequency
IF_END
loop_continue
loop_waitfor "STOP frequency"
waitfor "> "
IF_EQUAL satellite "MAIN_DAY"
sendv day_inbound_band_1_stop_frequency
IF_END
IF_EQUAL satellite "MAIN_NIGHT"
sendv night_inbound_band_1_stop_frequency
IF_END
IF_EQUAL satellite "BACKUP_DAY"
sendv backup_day_inbound_band_1_stop_frequency
IF_END
IF_EQUAL satellite "BACKUP_NIGHT"
sendv backup_night_inbound_band_1_stop_frequency
IF_END
loop_continue
loop_waitfor "-> inbound INITIAL frequency"
waitfor "> (KHz) "
IF_EQUAL satellite2 "MAIN"
sendv inbound_initial_frequency
IF_END
IF_EQUAL satellite2 "BACKUP"
sendv backup_inbound_initial_frequency
IF_END
loop_continue
loop_waitfor "-> inbound initial OFFSET"
waitfor "> (KHz) "
sendv inbound_initial_offset
loop_continue
loop_waitfor "RPP simulator is active"
send "22"
message "Please wait while the IDU resets . . ."
loop_break
loop_end
#TAM changed this from 10 to 60
TIMEOUT 60
status "Reseting IDU..."
waitfor "PARAMETERS SETTING PROCESS : SN = "
status "Verifying parameters..."
TIMEOUT 5
testserial#
set satellite ""
set satellite2 ""
loop_begin
loop_waitfor "MAIN satellite parameters:"
set satellite "MAIN"
set satellite2 "MAIN"
loop_continue
loop_waitfor "BACKUP satellite parameters:"
set satellite "BACKUP"
set satellite2 "BACKUP"
loop_continue
loop_waitfor "DAY parameters: (of MAIN satellite)"
set satellite "MAIN_DAY"
loop_continue
loop_waitfor "NIGHT parameters: (of MAIN satellite)"
set satellite "MAIN_NIGHT"
loop_continue
loop_waitfor "DAY parameters: (of BACKUP satellite)"
set satellite "BACKUP_DAY"
loop_continue
loop_waitfor "NIGHT parameters: (of BACKUP satellite)"
set satellite "BACKUP_NIGHT"
loop_continue
loop_waitfor "Set Gtech RPP application"
waitfor "(Y/N)"
send "Y"
loop_continue
loop_waitfor "Set Gtech RPP default parameters"
waitfor "(Y/N)"
send "N"
loop_continue
loop_waitfor "Modify existing RPP parameters"
waitfor "(Y/N)"
send "Y"
loop_continue
loop_waitfor "-> USAT OWN ADDRESS"
waitfor "("
testidu#
waitfor "> "
sendcr
loop_continue
loop_waitfor "-> USAT GROUP ADDRESS"
waitfor "("
testnv usat_group_address
waitfor "> "
sendcr
loop_continue
loop_waitfor "-> OUTBOUND RATE"
waitfor "("
testnv outbound_rate_test
waitfor "> "
sendcr
loop_continue
loop_waitfor "-> OUTBOUND REED SOLOMON"
waitfor "("
testv outbound_reed_solomon
waitfor ">"
sendcr
loop_continue
loop_waitfor "-> OUTBOUND MODULATION"
waitfor "("
testv outbound_modulation
waitfor "> "
sendcr
loop_continue
loop_waitfor "-> TIME-SLOT DURATION"
waitfor "("
testv time_slot_duration
waitfor ": "
sendcr
loop_continue
loop_waitfor "-> INBOUND CONVOLUTION"
waitfor "("
testv inbound_convolution
waitfor ">"
sendcr
loop_continue
loop_waitfor "-> INBOUND RA FRAME LENGTH"
waitfor "("
testv inbound_ra_frame_length
waitfor ":"
sendcr
loop_continue
loop_waitfor "-> INBOUND DA FRAME LENGTH"
waitfor "("
testv inbound_da_frame_length
waitfor ":"
sendcr
loop_continue
loop_waitfor "-> OUTBOUND ID"
waitfor "("
testv outbound_id
waitfor "> "
sendcr
loop_continue
loop_waitfor "-> OUT CODE RATE 1/4"
waitfor "("
testv out_code_rate_1/4
waitfor "> "
sendcr
loop_continue
loop_waitfor "-> OUT CODE RATE n/4"
waitfor "("
IF_EQUAL out_code_rate_n/4 "1"
tests "1/4"
IF_END
IF_EQUAL out_code_rate_n/4 "2"
tests "1/2"
IF_END
IF_EQUAL out_code_rate_n/4 "3"
tests "3/4"
IF_END
waitfor ">"
sendcr
loop_continue
loop_waitfor "-> INTERLEAVER ID"
waitfor "("
testv interleaver_id
waitfor ">"
sendcr
loop_continue
loop_waitfor "-> ESTABLISH LINK"
waitfor "("
testv establish_link
waitfor "> "
sendcr
loop_continue
loop_waitfor "-> INBOUND MODULATION"
waitfor "("
testv inbound_modulation
waitfor "> "
sendcr
loop_continue
loop_waitfor "-> SUPPORT HIGH SPEED INBOUND MODE"
waitfor "("
testv support_high_speed_inbound_mode
waitfor "> "
sendcr
loop_continue
loop_waitfor "-> INBOUND RATE RA"
waitfor "("
testnv inbound_rate_ra
waitfor "> "
sendcr
loop_continue
loop_waitfor "-> K FOR INB CODING"
waitfor "("
testv k_for_inb_coding
waitfor "> "
sendcr
loop_continue
loop_waitfor "-> HPP ID"
waitfor "("
testhppid#
waitfor ">"
sendcr
loop_continue
loop_waitfor "-> HSP LINK NUMBER"
waitfor "("
testnv hsp_link_number
waitfor ">"
sendcr
loop_continue
loop_waitfor "-> LOAD PROBE"
waitfor "("
testv load_probe
waitfor ">"
sendcr
loop_continue
loop_waitfor "-> DUAL INBOUND RATE"
waitfor "("
testv dual_inbound_rate
waitfor "> "
sendcr
loop_continue
loop_waitfor "-> INBOUND REED SOLOMON"
waitfor "("
testv inbound_reed_solomon
waitfor ">"
sendcr
loop_continue
loop_waitfor "-> Enter installation PASSWORD : "
sendv installation_password
loop_continue
loop_waitfor "Do you want to change password"
waitfor "> ... "
send "N"
loop_continue
loop_waitfor "-> HSP port for wagers"
waitfor "("
testv hsp_port_for_wagers
waitfor "> "
sendcr
loop_continue
loop_waitfor "-> HSP port for management"
waitfor "("
testv hsp_port_for_management
waitfor "> "
sendcr
loop_continue
loop_waitfor "-> Port configuration"
waitfor "("
testv port_configuration
waitfor "> "
sendcr
loop_continue
loop_waitfor "-> Enable dial backup"
waitfor "("
testv enable_dial_backup
waitfor "> "
sendcr
loop_continue
loop_waitfor "Port mode"
waitfor "("
testv port_mode
waitfor "> "
sendcr
loop_continue
loop_waitfor "Dial backup speed"
waitfor "("
testv dial_backup_speed
waitfor "> "
sendcr
loop_continue
loop_waitfor "Primary dial backup number"
waitfor "("
testv primary_dial_backup_number
waitfor "> "
sendcr
loop_continue
loop_waitfor "Secondary dial backup number"
waitfor "("
testv secondary_dial_backup_number
waitfor "> "
sendcr
loop_continue
loop_waitfor "Enable download"
waitfor "("
testv enable_download
waitfor "> "
sendcr
loop_continue
loop_waitfor "-> Enable high concentration mode"
waitfor "("
testv enable_high_concentration_mode
waitfor "> "
sendcr
loop_continue
loop_waitfor "-> DA Time-Slots"
waitfor "("
testv da_time-slots
waitfor "> "
sendcr
loop_continue
loop_waitfor "-> USAT Group 2 Address"
waitfor "("
testv usat_group2_address
waitfor "> "
sendcr
loop_continue
loop_waitfor "Set RSP default parameters"
waitfor "(Y/N)"
send "N"
loop_continue
loop_waitfor "-> OUTBOUND frequency"
waitfor "("
IF_EQUAL satellite "MAIN"
testv main_outbound_frequency
IF_END
IF_EQUAL satellite "BACKUP"
testv backup_outbound_frequency
IF_END
waitfor "> (MHz) "
sendcr
loop_continue
loop_waitfor "-> channel DELAY"
waitfor "("
IF_EQUAL satellite "MAIN"
testdelay#
IF_END
IF_EQUAL satellite "BACKUP"
testbackupdelay#
IF_END
waitfor "> (x 0.1mSec) "
sendcr
loop_continue
loop_waitfor "-> inbound REFERENCE frequency"
waitfor "("
IF_EQUAL satellite "MAIN"
testv main_inbound_reference_frequency
IF_END
IF_EQUAL satellite "BACKUP"
testv backup_inbound_reference_frequency
IF_END
waitfor "> (KHz) "
sendcr
loop_continue
loop_waitfor "-> inbound IDLE frequency"
waitfor "("
IF_EQUAL satellite "MAIN"
testv main_inbound_idle_frequency
IF_END
IF_EQUAL satellite "BACKUP"
testv backup_inbound_idle_frequency
IF_END
waitfor "> (KHz) "
sendcr
loop_continue
loop_waitfor "-> NUMBER of inbound bands"
waitfor "("
IF_EQUAL satellite "MAIN_DAY"
testv number_of_day_inbound_bands
IF_END
IF_EQUAL satellite "MAIN_NIGHT"
testv number_of_night_inbound_bands
IF_END
IF_EQUAL satellite "BACKUP_DAY"
testv number_of_backup_day_inbound_bands
IF_END
IF_EQUAL satellite "BACKUP_NIGHT"
testv number_of_backup_night_inbound_bands
IF_END
waitfor "> "
sendcr
loop_continue
loop_waitfor "START frequency"
waitfor "("
IF_EQUAL satellite "MAIN_DAY"
testv day_inbound_band_1_start_frequency
IF_END
IF_EQUAL satellite "MAIN_NIGHT"
testv night_inbound_band_1_start_frequency
IF_END
IF_EQUAL satellite "BACKUP_DAY"
testv backup_day_inbound_band_1_start_frequency
IF_END
IF_EQUAL satellite "BACKUP_NIGHT"
testv backup_night_inbound_band_1_start_frequency
IF_END
waitfor "> (KHz) "
sendcr
loop_continue
loop_waitfor "STOP frequency"
waitfor "("
IF_EQUAL satellite "MAIN_DAY"
testv day_inbound_band_1_stop_frequency
IF_END
IF_EQUAL satellite "MAIN_NIGHT"
testv night_inbound_band_1_stop_frequency
IF_END
IF_EQUAL satellite "BACKUP_DAY"
testv backup_day_inbound_band_1_stop_frequency
IF_END
IF_EQUAL satellite "BACKUP_NIGHT"
testv backup_night_inbound_band_1_stop_frequency
IF_END
waitfor "> (KHz) "
sendcr
loop_continue
loop_waitfor "-> inbound INITIAL frequency"
waitfor "("
IF_EQUAL satellite2 "MAIN"
testv inbound_initial_frequency
IF_END
IF_EQUAL satellite2 "BACKUP"
testv backup_inbound_initial_frequency
IF_END
waitfor "> (KHz) "
sendcr
loop_continue
loop_waitfor "-> inbound initial OFFSET"
waitfor "("
testv inbound_initial_offset
waitfor "> (KHz) "
sendcr
loop_continue
loop_waitfor "RPP simulator is active"
message "Please wait . . ."
loop_break
loop_end
pause 10
status "Configuration complete. Turn off all switches and disconnect PC."
message "Configuration complete. Turn off all switches and disconnect PC."
end
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.