1. f2ausbdriver.zip Driver
2. F2AUSB.INF File Contents

F2AUSB.INF Driver File Contents (f2ausbdriver.zip)

[Version]
Signature="$CHICAGO$"
Class=USB
provider=%Cypress%
LayoutFile=layout.inf

[Manufacturer]
%Cypress%=Cypress

[Cypress]
; Max
; This is the VID/PID for the EZ-USB development board.  This device
; is bound to a version of the general purpose driver that will
; automatically download the Keil 8051 monitor to external RAM.
; Do not use this VID/PID for your own device or the monitor will
; wipe out your firmware.
;
;%USB\VID_0547&PID_0080.DeviceDesc%=EZUSBDEV.Dev, USB\VID_0547&PID_0080
;%USB\VID_04B4&PID_0081.DeviceDesc%=EZUSBDEV.Dev, USB\VID_04B4&PID_0081

;
; This VID/PID is used by several of the EZ-USB development kit
; samples.  This device is bound to the general purpose driver.
;
%USB\VID_0547&PID_1002.DeviceDesc%=EZUSBDEV.Dev, USB\VID_0547&PID_1002
%USB\VID_0547&PID_1005.DeviceDesc%=EZUSBDEV.Dev, USB\VID_0547&PID_1005

;
; The folowing PIDs are for all of the devices in the EZ-USB family.
; These are the hardcoded PIDs that will be reported by an EZ-USB
; device with no external EEPROM. Bound to the general purpose driver.
;
%USB\VID_0547&PID_2131.DeviceDesc%=EZUSB.Dev, USB\VID_0547&PID_2131

[PreCopySection]
HKR,,NoSetupUI,,1

[DestinationDirs]
EZUSB.Files.Ext = 10,System32\Drivers
EZUSB.Files.Inf = 10,INF
EZUSBDEV.Files.Ext = 10,System32\Drivers
EZUSBDEV.Files.Inf = 10,INF

[EZUSB.Dev]
CopyFiles=EZUSB.Files.Ext, EZUSB.Files.Inf
AddReg=EZUSB.AddReg

[EZUSB.Dev.NT]
; copyfiles commented out for Win2K to avoid user intervention during install
CopyFiles=EZUSB.Files.Ext, EZUSB.Files.Inf
AddReg=EZUSB.AddReg

[EZUSB.Dev.NT.Services]
Addservice = EZUSB, 0x00000002, EZUSB.AddService

[EZUSB.AddService]
DisplayName    = %EZUSB.SvcDesc%
ServiceType    = 1                  ; SERVICE_KERNEL_DRIVER
StartType      = 2                  ; SERVICE_AUTO_START
ErrorControl   = 1                  ; SERVICE_ERROR_NORMAL
ServiceBinary  = %10%\System32\Drivers\ezusb.sys
LoadOrderGroup = Base

[EZUSB.AddReg]
HKR,,DevLoader,,*ntkern
HKR,,NTMPDriver,,ezusb.sys

[EZUSB.Files.Ext]
ezusb.sys

[EZUSB.Files.Inf]
f2ausb.Inf

[EZUSBDEV.Dev]
CopyFiles=EZUSBDEV.Files.Ext, EZUSBDEV.Files.Inf
AddReg=EZUSBDEV.AddReg

[EZUSBDEV.Dev.NT]
; copyfiles commented out for Win2K to avoid user intervention during install
CopyFiles=EZUSBDEV.Files.Ext, EZUSBDEV.Files.Inf
AddReg=EZUSBDEV.AddReg

[EZUSBDEV.Dev.NT.Services]
Addservice = EZUSBDEV, 0x00000002, EZUSBDEV.AddService

[EZUSBDEV.AddService]
DisplayName    = %EZUSBDEV.SvcDesc%
ServiceType    = 1                  ; SERVICE_KERNEL_DRIVER
StartType      = 2                  ; SERVICE_AUTO_START
ErrorControl   = 1                  ; SERVICE_ERROR_NORMAL
ServiceBinary  = %10%\System32\Drivers\ezusb.sys
LoadOrderGroup = Base

[EZUSBDEV.AddReg]
HKR,,DevLoader,,*ntkern
HKR,,NTMPDriver,,ezusb.sys

;---------------------------------------------------------------;

[Strings]
Cypress="Cypress Semiconductor"
USB\VID_0547&PID_1002.DeviceDesc="Flash2Advance U-Linker V1.0"
USB\VID_0547&PID_1005.DeviceDesc="Flash2Advance USB Linker"
USB\VID_0547&PID_2131.DeviceDesc="EZ-USB for Flash2Advance"

EZUSB.SvcDesc="Cypress General Purpose USB Driver (ezusb.sys)"
EZUSBDEV.SvcDesc="Cypress General Purpose USB Driver w/ Keil Monitor (ezusb.sys)"