****************************************************************** LUXSONOR LS220 SOFTWARE RELEASE NOTES VERSION 1.20 LuxSonor Inc. 45540 Northport Loop East Fremont, CA 94536 USA ****************************************************************** 1.0 UPDATES FROM PREVIOUS RELEASE --------------------------------- 1. support VGA overlay through DD VPE instead of VPM 2. support VCD 1.1 & 2.0 navigator 3. Karaoke DVD & VCD supports selectable from ViewDVD.exe 4. change data read from sector to file I/O 5. improve field lock set up time 6. support VGA Intel i740 7. support Hitachi DVD-RAM 8. enabled zoom feature in PAL 9. enable audio on the zoom in state 10. support Navigator from hard drive 11. DVD menu access is faster 12. VCD support high resolution still picture 13. added scroll bars for zoom in 14. fixed PAL TV output for VCD 15. simplified the karaoke features for VCD and DVD 16. add the video format (16:9 and 4:3) supports on the VGA 17. prolonged the DVD disc search time 18. cleared password for every new installation 19. supported Sigma Designs MPEG-1 scramble format 20. impoved video quality in PAL output mode 21. forced PAL TV output when play back the PAL DVD source 2.0 IMPORTANT INSTALLATION NOTE ------------------------------- For the VGA overlay, the software requires the VGA drivers supporting the VPE through Direct Draw. 3.0 INSTALLATION PROCEDURE -------------------------- 1. Make sure PC is OFF and insert LS220 board into any available PCI slot. 2. Upon starting Windows 95, you will be prompted to insert the manufacturer driver installation diskette because the board is a new device to the system. At this time, insert the LuxSonor LS220 install disk, the LS220 driver will be automatically loaded. 3. Windows 95 will then prompt you to restart. Once restarted, run the a:\setup.exe to install the LuxSonor LS220 Player files. Note : If the LS220 hardware was not setup correctly when first inserted into the system, the LS220 Player will not work. In this case, you must re-install the driver through the following steps : 1. Click the 'My Computer' Icon with the Right Mouse button. 2. Select the 'Properties' item on the menu displayed. 3. Select the 'Device Manager' folder, and double click on the 'OTHER' section. 4. Double Click on 'LuxSonor Inc. DVD PCI board' entry. 5. For Win95 original release, Select the Driver folder and change drivers. Next click on the "Have Disk" button and install with the new LuxSonor LS220 install disk. Or for Win95 OSR-2 release, Select the Driver folder and change drivers. Next click on the "Update Driver" button. In device driver wizard, click the "Yes" button to install the new LS220 install disk from floppy. 6. After reboot, if DVD Player files have not been previously installed, run a:\setup.exe. 4. The LS220 currently supports the following VGA cards - S3 Trio64KV2 S3 Virge DX S3 Trio 3D Cirrus Logic CL5446 Cirrus Logic CL5465 Cirrus Logic CL5480 ATI Rage II ATI Rage II+ ATI Rage Pro Nvidia Riva 128 Trident 975 3DLabs PerMedia2 Intel i740 Silicon Motion LYNX 4.0 VGA OVERLAY --------------- After the LS220 software installation, you can follow the instructions in the separate document - VPM.txt. NOTE : If you are using the Nvidia Riva 128, you should have installed Microsoft's DirectX 5 runtime components. The LS220 currently supports the following graphics chips through the feature connector : - S3 Trio64V2/KV2 - S3 Trio64V+ - S3 ViRGE - S3 ViRGE DX/GX - Cirrus Logic CL-GD5446 - Cirrus Logic CL-GD5480 - Cirrus Logic CL-GD5465 - ATI RageII - ATI RageII+ - ATI Rage Pro - Nvidia Riva 128 - Trident 975 - 3DLabs Permedia 2 The color palettes and resolutions under which these chips can support the LS220 output are listed in the separate document entitled VPM.txt. END.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.