[Identification] OptionType = NetAdapter [PlatformsSupported] PCMCIA [Options] EPX10BT [IRQChoices] IRQ_0 = "3",3 IRQ_1 = "4",4 IRQ_2 = "5",5 IRQ_3 = "7",7 IRQ_4 = "9",9 IRQ_5 = "10",10 IRQ_6 = "11",11 IRQ_7 = "12",12 IRQ_8 = "13",13 IRQ_9 = "14",14 IRQ_10 = "15",15 [IOBaseAddrChoices] IOBase_1 = "0x300",768 IOBase_2 = "0x320",800 IOBase_3 = "0x340",832 IOBase_4 = "0x360",864 [MemMappedWndBaseAddrChoices] Add_1 = "0xC0000",786432 Add_2 = "0xC4000",802816 Add_3 = "0xC8000",819200 Add_4 = "0xCC000",835586 Add_5 = "0xD0000",851968 Add_6 = "0xD4000",868352 Add_7 = "0xD8000",884736 Add_8 = "0xDC000",901120 [FileConstants] UtilityInf = "UTILITY.INF" ParamInf = "NCPARAM.INF" subroutineinf = "SUBROUTN.INF" SoftwareType = "driver" Exit_Code = 0 NetEventDLL = "%SystemRoot%\System32\netevent.dll" IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll" Manufacturer = "Microsoft" ProductMajorVersion = "3" ProductMinorVersion = "18" ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion) ProductSoftwareName = "EPX10BT" ProductSoftwareImagePath = "\SystemRoot\System32\drivers\Ndis95NT.sys" NetRuleSoftwareType = "nt95ndis3Sys ndisDriver nt95ndis3Driver" NetRuleSoftwareUse = $(SoftwareType) NetRuleSoftwareBindForm = """nt95ndis3Sys"" yes no container" NetRuleSoftwareClass = {"nt95ndis3Driver basic"} NetRuleSoftwareBindable = {"nt95ndis3Driver nt95ndis3Adapter non exclusive 100"} ProductHardwareName = "EPX10BT" NetRuleHardwareType = "nt95ndis3 nt95ndis3Adapter" NetRuleHardwareBindForm = " yes yes container" NetRuleHardwareClass = {"nt95ndis3Adapter basic"} ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion" ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters" ; PCMCIA FIXED BEGINE PCMCIADBKeyName = $(!NTN_ServiceBase)"\Pcmcia\DataBase" EPX10BTManufacture = "Eiger labs,Inc." EPX10BTModel = "EPX-10BT PC Card Ethernet 10BT" ; PCMCIA FIXED END [GeneralConstants] from = "" to = "" ExitCodeOk = 0 ExitCodeCancel = 1 ExitCodeFatal = 2 KeyNull = "" MAXIMUM_ALLOWED = 33554432 RegistryErrorIndex = NO_ERROR KeyProduct = "" KeyParameters = "" TRUE = 1 FALSE = 0 NoTitle = 0 ExitState = "Active" OldVersionExisted = $(FALSE) DriverPath = $(!STF_NTPATH)\drivers [date] Now = {} ? $(!LIBHANDLE) GetSystemDate [Identify] read-syms Identification set Status = STATUS_SUCCESSFUL set Identifier = $(OptionType) set Media = #("Source Media Descriptions", 1, 1) Return $(Status) $(Identifier) $(Media) [ReturnOptions] set Status = STATUS_FAILED set OptionList = {} set OptionTextList = {} set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) in $(LanguageList) ifstr(i) $($1) == "" goto returnoptions endif set PlatformList = ^(PlatformsSupported, 1) Ifcontains(i) $($1) in $(PlatformList) goto returnoptions else set Status = STATUS_NOTSUPPORTED goto finish_ReturnOptions endif else set Status = STATUS_NOLANGUAGE goto finish_ReturnOptions endif returnoptions = + set OptionList = ^(Options, 1) set OptionTextList = ^(OptionsText$($0), 1) set Status = STATUS_SUCCESSFUL finish_ReturnOptions = + Return $(Status) $(OptionList) $(OptionTextList) [InstallOption] set Option = $($1) set SrcDir = $($2) set AddCopy = $($3) set DoCopy = $($4) set DoConfig = $($5) read-syms GeneralConstants read-syms FileConstants read-syms DialogConstants$(!STF_LANGUAGE) shell "" DebugControl StartWait Debug-Output "OEMNADSI.INF: STF_CWDDIR is: "$(!STF_CWDDIR) set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) NOT-IN $(LanguageList) Return STATUS_NOLANGUAGE endif Debug-Output "OEMNADSI.INF: STF_CWDDIR is: "$(!STF_CWDDIR) Debug-Output "OEMNADSI.INF: STF_LANGUAGE is: "$(!STF_LANGUAGE) set-subst LF = "\n" ifstr(i) $(!NTN_Origination) == "NCPA" set Continue = $(OK) endif read-syms FileConstants$(!STF_LANGUAGE) detect date set-title $(FunctionTitle) set to = Begin set from = Begin set CommonStatus = STATUS_SUCCESSFUL Begin = + Ifstr(i) $(!NTN_InstallMode) == deinstall set StartLabel = removeadapter else-Ifstr(i) $(!NTN_InstallMode) == Update set StartLabel = UpgradeSoftware else-Ifstr(i) $(!NTN_InstallMode) == bind set StartLabel = bindingadapter else-Ifstr(i) $(!NTN_InstallMode) == configure set CommonStatus = STATUS_REBOOT set StartLabel = configureadapter Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Debug-Output "OEMNADSI.INF: Cannot configure the driver software." Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "OEMNADSI.INF: ShellCode error: cannot get an error string." goto ShellCodeError endif set Error = $($R0) set from = end set to = end goto nonfatalinfo endif else-Ifstr(i) $(!NTN_InstallMode) == install set StartLabel = installadapter set OEM_ABANDON_OPTIONS = {} set OEM_ABANDON_SOFTWARE = FALSE set OEM_ABANDON_ON = TRUE else set DlgType = "MessageBox" set STF_MB_TITLE = $(ShellCodeErrorTitle) set STF_MB_TEXT = $(ShellCodeErrorText1) set STF_MB_TYPE = 1 set STF_MB_ICON = 3 set STF_MB_DEF = 1 ui start "Error Message" set from = end goto nonfatalinfo endif Shell "" $(StartLabel) EndWait set IRQValue = *($(IRQList), 3) set IOBaseAddrValue = *($(IOBaseAddrList), 1) set MemMappedWndAddrValue = *($(MemMappedWndAddrList),~($(MemMappedWndAddrValues),851968)) set EditTextIn = "1" set from = $(fatal) set to = $(fatal) goto $(StartLabel) installadapter = + ; PCMCIA FIXED BEGINE OpenRegKey $(!REG_H_LOCAL) "" $(PCMCIADBKeyName) $(MAXIMUM_ALLOWED) PCMCIADBKey ifstr $(PCMCIADBKey) == $(NULL) CloseRegKey $(PCMCIADBKey) Debug-Output "PCMCIA service not present" goto nonfatal else OpenRegKey $(!REG_H_LOCAL) "" $(PCMCIADBKeyName)"\"$($(Option)Manufacture) $(MAXIMUM_ALLOWED) PCMCIA$($(Option)Manufacture)Key ifstr $(PCMCIA$($(Option)Manufacture)Key) == $(NULL) debug-output "Adding "$(PCMCIADBKeyName)"\"$($(Option)Manufacture) CreateRegKey $(PCMCIADBKey) {$($(Option)Manufacture), 0, 0} "" $(MAXIMUM_ALLOWED) "" PCMCIA$($(Option)Manufacture)Key else debug-output "Manufacture sub key already exist" endif OpenRegKey $(!REG_H_LOCAL) "" $(PCMCIADBKeyName)"\"$($(Option)Manufacture)"\"$($(Option)Model) $(MAXIMUM_ALLOWED) PCMCIA$($(Option)Manufacture)$($(Option)Model)Key ifstr $(PCMCIA$($(Option)Manufacture)$($(Option)Model)Key) == $(NULL) debug-output "Adding "$(PCMCIADBKeyName)"\"$($(Option)Manufacture)"\"$($(Option)Model) CreateRegKey $(PCMCIA$($(Option)Manufacture)Key) {$($(Option)Model), 0, 0} "" $(MAXIMUM_ALLOWED) "" PCMCIA$($(Option)Manufacture)$($(Option)Model)Key SetRegValue $(PCMCIA$($(Option)Manufacture)$($(Option)Model)Key) {DeviceType, 0, $(!REG_VT_SZ),"NET"} SetRegValue $(PCMCIA$($(Option)Manufacture)$($(Option)Model)Key) {Driver, 0, $(!REG_VT_SZ),"EPX10BT"} SetRegValue $(PCMCIA$($(Option)Manufacture)$($(Option)Model)Key) {DriverVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)"."$(ProductMinorVersion)} else SetRegValue $(PCMCIA$($(Option)Manufacture)$($(Option)Model)Key) {DeviceType, 0, $(!REG_VT_SZ),"NET"} SetRegValue $(PCMCIA$($(Option)Manufacture)$($(Option)Model)Key) {DriverVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)"."$(ProductMinorVersion)} debug-output "Device sub key already exist" endif CloseRegKey $(PCMCIA$($(Option)Manufacture)$($(Option)Model)Key) CloseRegKey $(PCMCIA$($(Option)Manufacture)Key) CloseRegKey $(PCMCIADBKey) endif ; PCMCIA FIXED END OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) CloseRegKey $(KeyProduct) ifstr(i) !(NTN_RegBase) == $(ProductKeyName) Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+ $(ProductVersion) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "OEMNADSI.INF: ShellCode error: cannot get an error string." goto ShellCodeError endif goto end else Shell $(UtilityInf), CardExistedDlg ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "OEMNADSI.INF: ShellCode error: cannot get an error string." goto ShellCodeError endif ifstr(i) $($R1) != "OK" set CommonStatus = STATUS_USERCANCEL goto end endif set OldVersionExisted = $(TRUE) endif Endif Goto adapteroptions configureadapter = + Ifstr(i) $(KeyProduct) == $(KeyNull) OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) == $(KeyNull) Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Debug-Output "OEMNADSI.INF: Cannot find component product key" Goto fatalregistry Endif Endif Debug-Output "OEMNADSI.INF: INF: Shelling to FindService" Shell $(UtilityInf) FindService, $(KeyProduct) Ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "OEMNADSI.INF: INF: FindService shell failure" Goto ShellCodeError Endif Ifstr(i) $($R0) != NO_ERROR Debug-Output "OEMNADSI.INF: INF: FindService Shell error: "$($R0) Goto fatalregistry endif set KeyParameters = $($R2) CloseRegKey $($R1) Ifstr $(KeyParameters) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Debug-Output "OEMNADSI.INF: Cannot find component service" goto fatalregistry endif set OldVersionExisted = $(TRUE ) set ValueName = "" set ValueData = "" set ValueStr = "" set ValueList = {} EnumRegValue $(KeyParameters) ValueList ForListDo $(ValueList) set ValueItem = $($) set ValueName = *($(ValueItem),1) set ValueData = *($(ValueItem),4) Ifstr(i) $(ValueName) == "InterruptNumber" set IRQValueIndex = $(ValueData) else-ifstr(i) $(ValueName) == "IoBaseAddress" set IOBaseAddrIndex = $(ValueData) else-ifstr(i) $(ValueName) == "PCCARDAttributeMemoryAddress" set MemMappedWndAddrIndex = $(ValueData) endif EndForListDo set IRQValue = *($(IRQList), ~($(IRQValues),$(IRQValueIndex))) ifstr(i) $(IRQValue) == "" set IRQValue = *($(IRQList), 3) endif set IOBaseAddrValue = *($(IOBaseAddrList), + ~($(IOBaseAddrValues),$(IOBaseAddrIndex))) ifstr(i) $(IOBaseAddrValue) == "" set IOBaseAddrValue = *($(IOBaseAddrList), 1) endif set MemMappedWndAddrValue = *($(MemMappedWndAddrList), + ~($(MemMappedWndAddrValues),$(MemMappedWndAddrIndex))) ifstr(i) $(MemMappedWndAddrValue) == "" set MemMappedWndAddrValue = *($(MemMappedWndAddrList),~($(MemMappedWndAddrValue),884736)) endif adapteroptions = + set from = adapteroptions read-syms FileDependentDlg$(!STF_LANGUAGE) ui start "InputDlg" ifstr(i) $(DLGEVENT) == "CONTINUE" set IRQValueIndex = $(Combo1Out) set IOBaseAddrIndex = $(Combo2Out) set MemMappedWndAddrIndex = $(Combo3Out) ui pop 1 else-ifstr(i) $(DLGEVENT) == "BACK" set CommonStatus = STATUS_USERCANCEL Debug-Output "OEMNADSI.INF: Action: exit. Bye." ui pop 1 goto end else ui pop 1 Debug-Output "OEMNADSI.INF: Action: unknown. Bye." goto end endif nextstep = + ifint $(OldVersionExisted) == $(TRUE) ifstr(i) $(!NTN_InstallMode) == configure goto writeparameters endif endif StartWait Ifint $(OldVersionExisted) != $(FALSE) Goto installhardware Endif ifstr(i) $(!NTN_InstallMode) == "install" Ifstr(i) $(DoCopy) == "YES" Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Else-Ifstr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal Else-Ifstr(i) $($R0) == STATUS_USERCANCEL Goto successful Endif Set SrcDir = $($R1) Endif install "Install-Option" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal endif endif Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), + $(ProductSoftwareName), + $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), + $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+ $(NetEventDLL), "" Set OEM_ABANDON_SOFTWARE = TRUE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "OEMNADSI.INF: ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "OEMNADSI.INF: Registry error: add software components" CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) CloseRegKey $($R4) CloseRegKey $($R5) goto fatalregistry endif Set SoftProductKey = $($R1) Set SoftNetRuleKey = $($R2) Set SoftServiceKey = $($R3) Set SoftParameterKey = $($R4) Set SoftLinkageKey = $($R5) set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+ {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+ {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+ {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "OEMNADSI.INF: ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "OEMNADSI.INF: Registry error: add value list for software product." CloseRegKey $(SoftProductKey) CloseRegKey $(SoftNetRuleKey) CloseRegKey $(SoftServiceKey) CloseRegKey $(SoftParameterKey) CloseRegKey $(SoftLinkageKey) goto fatalregistry endif set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+ {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, + {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, + {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "OEMNADSI.INF: ShellCode error." goto ShellCodeError endif Set RegistryErrorIndex = $($R0) CloseRegKey $(SoftProductKey) CloseRegKey $(SoftNetRuleKey) CloseRegKey $(SoftServiceKey) CloseRegKey $(SoftParameterKey) CloseRegKey $(SoftLinkageKey) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "OEMNADSI.INF: Registry error: add value list." goto fatalregistry endif installhardware =+ Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName) ifint $($R4) != -1 Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4)) endif ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "OEMNADSI.INF: Cannot add hardware component" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "OEMNADSI.INF: Registry error: add hardware component" CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) goto fatalregistry endif set KeyProduct = $($R1) set KeyAdapterRules = $($R2) set KeyParameters = $($R3) set AdapterNumber = $($R4) set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+ {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+ {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "OEMNADSI.INF: ShellCode error" goto ShellCodeError endif CloseRegKey $(KeyProduct) Set KeyProduct = "" set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)"""" set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm) set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+ {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "OEMNADSI.INF: ShellCode error." goto ShellCodeError endif CloseRegKey $(KeyAdapterRules) Set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "OEMNADSI.INF: Registry error: add value list." CloseRegKey $(KeyParameters) goto fatalregistry Endif writeparameters = + Shell $(UtilityInf), GetBusTypeNum set BusTypeNum = $($R1) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set BusNum = 0 Ifstr(i) $(KeyParameters) == $(KeyNull) Debug-Output "OEMNADSI.INF: *** KeyParameters is NULL at writeparameters" Endif set IRQValue = *($(IRQValues), ~($(IRQList),$(IRQValueIndex))) set IOBaseAddrValue = *($(IOBaseAddrValues), + ~($(IOBaseAddrList),$(IOBaseAddrIndex))) set MemMappedWndAddrValue = *($(MemMappedWndAddrValues), + ~($(MemMappedWndAddrList),$(MemMappedWndAddrIndex))) set NewValueList = {+ {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+ {BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+ {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+ {InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+ {IoBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)},+ {IoLength,$(NoTitle),$(!REG_VT_DWORD),32},+ {NT351,$(NoTitle),$(!REG_VT_DWORD),1},+ {PCCARDAttributeMemoryAddress,$(NoTitle),$(!REG_VT_DWORD),$(MemMappedWndAddrValue)},+ {PCCARDAttributeMemorySize,$(NoTitle),$(!REG_VT_DWORD),8192},+ {PCCARDAttributeMemoryOffset,$(NoTitle),$(!REG_VT_DWORD),0},+ {Pcmcia,$(NoTitle),$(!REG_VT_DWORD),1}} Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "OEMNADSI.INF: ShellCode error." goto ShellCodeError endif Set RegistryErrorIndex = $($R0) CloseRegKey $(KeyParameters) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR Debug-Output "OEMNADSI.INF: Registry error: Add value list" goto fatalregistry Endif EndWait goto successful bindingadapter =+ set Error = "Binding: Sorry, not yet implemented." goto fatal removeadapter = + Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "OEMNADSI.INF: ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif else Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $(!NTN_RegBase) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "OEMNADSI.INF: ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif goto end UpgradeSoftware = + ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) GetRegValue $(KeyProduct),"MajorVersion", VersionInfo set Version = *($(VersionInfo), 4) Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set !UG_Filename = $($R0) ifstr(i) $(!UG_Filename) != "" install "Install-Update" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS goto fatal endif endif SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)} SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)} ifint $(Version) != $(ProductVersion) endif CloseRegKey $(KeyProduct) else goto fatalregistry endif else OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) + $(MAXIMUM_ALLOWED) NetworkCardKey Ifstr(i) $(NetworkCardKey) != $(KeyNull) GetRegValue $(NetworkCardKey),"ServiceName", ServiceNameInfo set ServiceName = *($(ServiceNameInfo), 4) OpenRegKey $(NetworkCardKey) "" "NetRules" + $(MAXIMUM_ALLOWED) NetRuleKey Ifstr(i) $(NetRuleKey) != $(KeyNull) else goto fatalregistry endif CloseRegKey $(NetRules) CloseRegKey $(NetworkCardKey) else goto fatalregistry endif OpenRegKey $(!REG_H_LOCAL) "" + $(!NTN_ServiceBase)"\"$(ServiceName) + $(MAXIMUM_ALLOWED) ServiceKey Ifstr(i) $(ServiceKey) != $(KeyNull) CloseRegKey $(ServiceKey) else goto fatalregistry endif endif goto end successful = + goto end abandon = + ForListDo $(OEM_ABANDON_OPTIONS) Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $($) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "OEMNADSI.INF: ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif EndForListDo Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), FALSE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "OEMNADSI.INF: ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif goto end warning = + Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(to) else-ifstr(i) $($R1) == "CANCEL" goto $(from) else goto end endif nonfatalinfo = + Set CommonStatus = STATUS_USERCANCEL Set Severity = STATUS goto nonfatalmsg nonfatal = + Set Severity = NONFATAL nonfatalmsg = + ifstr(i) $(Error) == "" Set Severity = NONFATAL Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(from) else goto "end" endif fatalregistry = + Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal fatal = + ifstr(i) $(Error) == "" Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif goto setfailed ShellCodeError = + set DlgType = "MessageBox" set STF_MB_TITLE = $(ShellCodeErrorTitle) set STF_MB_TEXT = $(ShellCodeErrorText) set STF_MB_TYPE = 1 set STF_MB_ICON = 3 set STF_MB_DEF = 1 ui start "Error Message" goto setfailed setfailed = + set CommonStatus = STATUS_FAILED ifstr(i) $(OEM_ABANDON_ON) == TRUE set OEM_ABANDON_ON = FALSE goto abandon endif goto end end = + goto term term = + Return $(CommonStatus) [Install-Option] set STF_VITAL = "" ifstr(i) $(AddCopy) == "YES" AddSectionFilesToCopyList Files-nt95ndis3 $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers endif Debug-Output "OEMNADSI.INF: [Install-Option] DoCopy = "$(DoCopy) ifstr(i) $(DoCopy) == "YES" set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList endif ifstr(i) $(DoConfig) == "YES" endif Exit [Install-Update] set STF_VITAL = "" set STF_OVERWRITE = "VERIFYSOURCEOLDER" AddSectionFilesToCopyList Files-nt95ndis3 $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH) set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList exit [Source Media Descriptions] 1 = "" [ProductType] STF_PRODUCT = Winnt STF_PLATFORM = I386 [Files-Inf] 1, oemsetnt.inf, SIZE=1000, RENAME=$(!UG_Filename) [Files-nt95ndis3] 1,Ndis95NT.SYS , SIZE=21352 [LanguagesSupported] ENG [OptionsTextENG] EPX10BT = "Eiger PC LAN Card" [FileConstantsENG] ProCaption = "Windows NT Setup" ProCancel = "Cancel" ProCancelMsg = "Windows NT Networking is not correctly installed. "+ "Are you sure you want to cancel copying files?" ProCancelCap = "Network Setup Message" ProText1 = "Copying:" ProText2 = "To:" FunctionTitle = "Eiger labs, Inc. Adapter Card Setup" ProductSoftwareTitle = "Eiger PC LAN Card NDIS Driver" ProductSoftwareDescription = "Eiger PC LAN Card NDIS Driver" ProductHardwareEPX10BTTitle = "Eiger PC LAN Card" ProductHardwareEPX10BTDescription = "Eiger PC LAN Card" IRQList = ^(IRQChoices, 1) IRQValues = ^(IRQChoices, 2) IOBaseAddrList = ^(IOBaseAddrChoices, 1) IOBaseAddrValues = ^(IOBaseAddrChoices, 2) MemMappedWndAddrList = ^(MemMappedWndBaseAddrChoices, 1) MemMappedWndAddrValues = ^(MemMappedWndBaseAddrChoices, 2) ShellCodeErrorTitle = "Error: "$(FunctionTitle) ShellCodeErrorText = "Shell Code Error." ShellCodeErrorText1 = "Can not continue with setup. Refer to the manual." [DialogConstantsENG] Help = "&Help" Exit = "Cancel" OK = "OK" HelpContext = "" Continue = "Continue" Cancel = "Cancel" [FileDependentDlgENG] Label1 = "&Interrupt Number:" Label2 = "I/O &Port Base Addr:" Label3 = "&Memory Address:" DlgType = "Combination" DlgTemplate = "UBNDIS" Caption = $(FunctionTitle) Combo1List = $(IRQList) Combo1Out = $(IRQValue) Combo2List = $(IOBaseAddrList) Combo2Out = $(IOBaseAddrValue) Combo3List = $(MemMappedWndAddrList) Combo3Out = $(MemMappedWndAddrValue) ComboListItemsIn = {Combo1List, Combo2List, Combo3List} ComboListItemsOut = {Combo1Out, Combo2Out, Combo3Out} EditTextLim = "" CBOptionsGreyed = {} HelpContext = $(!IDH_DB_CARDSELECTION_INS)Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.