OS/2 Installation Some versions of OS/2 come supplied with PCMCIA card software. The software supplied by IBM with these versions cannot recognise PCMCIA cards other than modems. The following steps will get your LAN Card working with OS/2: 1. Remove the following drivers from your OS/2 CONFIG.SYS file basedev=pcmcia.sys device=c:\os2\msdos\vpcmcia.sys device=c:\os2\boot\autodrv.sys c:\os2\autodrv.ini basedev=ibm2***.sys /s0=y 2. Copy the program EIGEROS2.OS2 from the supplied drivers disk (OS2 sub-directory) to your OS/2 boot directory on your hard disk. e.g. copy a:\os2\EIGEROS2.os2 c:\os2\boot\. 3. Add the following line to the OS/2 CONFIG.SYS file before the Netware requester lines or other LAN drivers. device=c:\os2\boot\EIGEROS2.os2 /irq x /io y /mem z This installation procedure has been tested on an Intel based PCMCIA controller under OS/2 Version 2.1 and Warp.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.