; NETEL.INF ; ; Eiger Labs EigerNet PCMCIA Adapter Setup Script ; Copyright Eiger Labs, Inc. 1996 ; [Version] Signature="$CHICAGO$" Provider=%MS% Class=Net [Manufacturer] %MANUF%=MANUF [MANUF] %ELNDIS%=ELNDIS.ndi,PCMCIA\EIGER_LABS__INC.-EIGERNET_10/100BT-749F ;**************************************************************************** ; Add these keys to the registry ;**************************************************************************** [ELNDIS.ndi] AddReg=ADDREG_ELNDIS.ndi.reg,ELNDIS.ndi.reg,ADDREG_EL.ndi.reg [ADDREG_ELNDIS.ndi.reg] ; key,subkey,valuname,type,value ; net/nnnn HKR,,DevLoader,,*ndis HKR,,DeviceVxDs,,ELNDIS.VXD HKR,,EnumPropPages,,"netdi.dll,EnumPropPages" ; Parameters for hardware resources (PnP style): HKR,,IoBaseAddress,1,02,00,00,00 HKR,,InterruptNumber,1,04,00,00,00 ; net/nnnn/NDIS HKR,NDIS,LogDriverName,,ELNDIS HKR,NDIS,MajorNdisVersion,1,03 HKR,NDIS,MinorNdisVersion,1,0A ; ; net/nnnn/ndi/Interfaces ; HKR,Ndi\Interfaces,DefUpper,,"ndis3" HKR,Ndi\Interfaces,DefLower,,"ethernet" HKR,Ndi\Interfaces,UpperRange,,"ndis3" HKR,Ndi\Interfaces,LowerRange,,"ethernet" ;Properties/Advanced: ; NetworkAddress HKR,NDI\params\NetworkAddress,ParamDesc,,"NetworkAddress" HKR,NDI\params\NetworkAddress,default,,"" HKR,NDI\params\NetworkAddress,type,,edit HKR,NDI\params\NetworkAddress,LimitText,,16 HKR,NDI\params\NetworkAddress,UpperCase,,1 HKR,NDI\params\NetworkAddress,optional,,1 HKR,NDI\params\NetworkAddress,flag,1,20,00,00,00 [ELNDIS.ndi.reg] HKR,Ndi,CardType,,"PCMCIA" HKR,Ndi\Install,ndis3,,"ELndis.ndis3" HKR,Ndi,DeviceID,,"PCMCIA\EIGER_LABS__INC.-EIGERNET_10/100BT-749F" ; ; PCMCIA attribute info override: ; This can be dropped since the card has correct CIS. ; [ADDREG_EL.ndi.reg] HKR,Override,0000,1, \ ; CONFIGMG_VERSION 00,04,00,00, \ ; PRIORITY 00,00,00,00, \ ; ; I/O Resource Descriptor ; 24,00,00,00, \ ; Total length of I/O Resource Descriptor 02,00,00,00, \ ; ResType_IO = 0x00000002 01,00, \ ; IOD_Count; 0C,00, \ ; IOD_Type; // IOType_Range = 0x000C 00,00, \ ; IOD_Alloc_Base; 00,00, \ ; IOD_Alloc_End; 00,00, \ ; IOD_DesFlags; 00, \ ; IOD_Alloc_Alias; 00, \ ; IOD_Alloc_Decode; C0,FF, \ ; IOR_Align; // Mask for base alignment FFC0 40,00, \ ; IOR_nPorts; // Number of ports=40h 00,00, \ ; IOR_Min; // Min port address=0 ?? FF,FF, \ ; IOR_Max; // Max port address = 3ff 00,00, \ ; IOR_RangeFlags; // Flags 00, \ ; IOR_Alias; // Alias offset 00, \ ; IOR_Decode; // Address specified 64,00,00,00, \ ; flags, 0x40 = 16-bit port ; ; IRQ Resource Descriptor ; 14,00,00,00, \ ; Total length of IRQ Resource Descriptor 04,00,00,00, \ ; ResType_IRQ = 0x00000004 00,00, \ ; IRQD_Flags; 00,00, \ ; IRQD_Alloc_Num; // Allocated IRQ number 38,9E, \ ; IRQD_Req_Mask; // Mask of possible IRQs {3,4,5,9,10,11,12,15} 00,00, \ ; IRQD_Reserved; 20,00,00,00, \ ; flags, 0x20 = Level mode interrupts ; ; REQUEST_CONFIG_PKT Descriptor ; 19,00,00,00, \ ; Total length of REQUEST_CONFIG_PKT Descriptor 7C,89,00,00, \ ; (ResType_Ignored_Bit + PCCARD_DEVICE_ID) = 0x897C 00,00, \ ; Socket; (FILLED IN RUNTIME) 02,00, \ ; Attributes; i/o client 32, \ ; Vcc = 5.0v =50t 32, \ ; Vpp1 32, \ ; Vpp2 must be same as Vpp1 02, \ ; IntType; 00,01,00,00, \ ; ConfigBase = 100h 00, \ ; Status reg; 00, \ ; Pin reg; 00, \ ; Copy reg; 01, \ ; ConfigIndex reg = 1; set to 3 for FLASH access 01, \ ; regs defined: {cfg idx, sts} ; ; TERMINATOR ; 00,00,00,00 ;**************************************************************************** ; Copying files ;**************************************************************************** ; NDIS 3 driver [ELndis.ndis3] CopyFiles=ELndis.ndis3.CopyFiles [ELndis.ndis3.CopyFiles] ELNDIS.VXD ;**************************************************************************** ; Source and Destination Directories ;**************************************************************************** [DestinationDirs] DefaultDestDir =11 ; LDID_SYS ELndis.ndis3.CopyFiles =11 [SourceDisksNames] 55="Eiger Labs Disk","",0 [SourceDisksFiles] ELNDIS.VXD=55,,30000 ;**************************************************************************** ; Translatable strings ;**************************************************************************** [Strings] MS="Microsoft" ; ; Manufacturer names ; MANUF="Eiger Labs, Inc." ; ; Adapter names ; ELNDIS="Eiger Labs EigerNet PCMCIA Adapter"Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.