Super Link Cable
1. Insert the Super Link Cable into the USB port on the PC. The PC
will show that a new hardware has been detected.
2. The PC will ask you to direct the path for the driver for the new
hardware. Please insert the floppy disk into the PC and direct the
driver path to the floppy dive.
3. Make sure you have set the path correctly and it is the correct
driver. You can begin the installation of the driver to your PC.
There will be some information showed on the screen:
a. The installation genie will search for new device driver.
Device unknown
Device driver is software that enables hardware to function properly.
b. What would you like Windows to do for you?
Search for the best device driver
Show the list for all device drivers. I would like to select the
most suitable device driver
(Select "Search for the best device driver" )
c. Windows will search for the device driver under the following
selections. Please click next to start searching.
( Select "floppy" )
d. Windows has found the following device
Super Link Cable (Windows 98)
Windows in now ready to install the driver for this device. Please
press previous step to select other device driver. Or press next
step to continue.
e. Windows has installed the software needed for the new hardware
4. After completion of the driver installation, double click the " Setup"
file in the floppy disk.
5. Follow the instructions as indicated on the PC screen and complete the
set up.
6. The desktop will show an " Super Link Cable" icon and the program
folder "Super Link Cable" will be added to the start menu under program.
7. Attach the other end of the Super Link Cable into the USB port on the
other PC and execute the above steps from 1 through 6.
8. When connecting two PCs via Super Link Cable, please make sure the
program " Super Link Cable" is running in both computer and ensure
all operation is done under its working windows.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.