USB LAN Cable 1. Insert the floppy disk into the floppy drive on the PC. 2. Execute the "Setup" file in the floppy and follow the installation steps as indicated. 3. When the installation is completed, insert the USB LAN Cable into the USB port on the PC, and the PC will automatically detect the hardware and install the driver. 4. Repeat the above steps from 1 to 3 to the other PC. 5. Attach the flat end of the USB Cable to the USB port on the PC. Attach the other end to the connector located on the USB LAN Cable. The PC will automatically detect EZ-Link USB and install its software. 6. The network setup is comparable to other LAN card.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.