Introduction: ============= This document describes the procedure to install Windows NT4.0 driver for 100BASE-FX Fast Ethernet PCMCIA Adapter. Location of Driver: A:\ ( or A:\winnt40 ) It is not necessary to install enabler software (either a Card Enabler or Card and Socket Services ) when installing a 100BASE-FX PCMCIA Ethernet Card under Windows NT 4.0.This driver will directly configure the PCMCIA Eth- ernet Card for the Intel 82365SL and other PCMCIA controllers compatible with it. Installing driver procedure on Microsoft Windows NT : ----------------------------------------------------- When you are in Windows NT4.0 1. In the Main group of NT, select the [Control Panel] icon. 2. In the Control Panel window, choose the [Network] icon. 3. In the Network Settings dialog box, choose the [Adapter] button. And then choose [Add] button .The Add Network Adapter dialog box appears. 4. When asked for the name of the network card, select [Have Disk] button. 5. Insert this driver diskette into drive A,and type the path of NT4.0 driver --> A:\ 6. Select the [100BASE-FX Fast Ethernet PCMCIA Adapter] then press <Enter>. 7. You need to specify the IRQ No.,I/O port address,Memory Location and Socket number. 8. NT will then perform the binding process. If any additional network software options were installed, you may be prompted for specific information for these packages. 9. Restarting your system you will acquire network service. ------------------------------- End of File -------------------------------- Potential problems when installing PCMCIA driver with Windows 4.0 ------------------------------------------------------------------ 1. If you install two or more devices in your Windows system using the same IRQ or I/O port address, your system cannot access the NIC correctly. This problems happened on some PC systems with another cards like sound card. To prevent IRQ, IO port conflicts between the devices and assign a different IRQ, IO port to the NIC, you may need to configure the computer to reserve IRQ for PCMCIA NIC. We suggests the procedures as below: After installing the PCMCIA NIC, a. goto "PC/BIOS setup" menu b. goto "PNP and PCI setup(Configuration)" menu "PNP OS Installed": NO(or disabled) "IRQ-X used(assigned) by": Legacy ISA(IRQ-X which the PCMCIA NIC used) Note: The exact BIOS display of each parameters varies from computer to computer c. save and exit the setup menu 2. Make sure each devices has no IRQ, IO port conflicts between each other, some sound card occupies multiple IRQs. ----------------------------------------------------------Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.