PLANET ENW-3502F PCMCIA Fast Ethernet Adapter Installation for SUN PCNFS 5.0 Contents -------- .Introduction .Requirements .Minimum Skill Level .Getting Started Introduction ------------ This installation assumes that the PCMCIA drivers are working properly. Please consult \PCMCIA\README.TXT for help with PCMCIA Drivers. Getting Started will describe the installation for Lan Manager. Requirements ------------ .A PCMCIA compatible Laptop .A PCMCIA chipset that is PCIC compatible (Intel, Cirrus, Vadem, and VLSI) or a Card Service has been installed .SUN PCNFS 5.0 or newer .A PCMCIA Fast Ethernet Card .A knowledge of basic DOS commands and editing text files Minimum Skill Level ------------------- .A knowledge of basic DOS commands .A knowledge of editing text files .A knowledge of DOS basic file structure (CONFIG.SYS and AUTOEXEC.BAT) .A knowledge of the network driver configuration being used .Please see Support Options if you are not comfortable will this skill level Getting Started --------------- Please read all methods below and choose the one that matches your configuration. Method 1 -- NDIS Driver ----------------------- When using PC-NFS concurrently with LAN Manager, select the "NDIS" option from the PC-NFS installation screen. This option works with the NDIS driver included in the provided driver diskette. Copy the files listed below into the \NFS directory of your hard disk. These files will be used in the installation. File Description ------------ ---------------------------------------------- NFS-NDIS.SYS PC-NFS driver program LANEN.EXE PC card enabler. Copy from A:\ENABLER\LANEN.EXE LE100.DOS NDIS driver program PROTMAN.SYS MS PROTOCOL MANAGER NETBIND.EXE MS LAN MANAGER Netbind The following lists the contents of the configuration files: CONFIG.SYS AUTOEXEC.BAT ---------- ------------ SWITCHES=/F SET TZ=EST5EDT DEVICE=C:\HIMEM.SYS C:\DOS\SMARTDRV.EXE DEVICE=C:\EMM386.EXE NOEMS RAM @PROMPT $p$g DOS=HIGH,UMB PATH=C:\NFS;C:\WINDOWS;C:\DOS; BUFFERS=10,0 C:\LANMAN\NETBIND FILES=40 SET TEMP=C:\DOS STACKS=0,0 SET NFSDRIVE=C LASTDRIVE=G SET NFSPATH=C:\NFS SHELL=C:\DOS\COMMAND.COM C:\DOS /P SET TN_DIR=C:\NFS\TELNET DEVICE=C:\NFS\PCNFS.SYS /l40 C:\NFS\PRT * DEVICE=C:\NFS\SOCKDRV.SYS C:\NFS\NET INIT DEVICE=C:\LANMAN\PROTMAN.SYS /I:C:\LANMAN DEVICE=C:\LANMAN\NFS-NDIS.SYS DEVICE=C:\LANMAN\LANEN.EXE DEVICE=C:\LANMAN\LE100.DOS PROTOCOL.INI ------------ [PROTOCOL MANAGER] DriverName = PROTMAN$ [LE100_NIF] DRIVERNAME = LE100$ [NFS-NDIS] DriverName = NFSLINK$ Bindings = LE100_NIF To use the NDIS driver, the user needs to obtain a PC-NFS 5.0 QUIKNDIS diskette which will install all but the Fast Ethernet driver. Method 2 -- ODI Driver ----------------------- When using PC-NFS concurrently with NetWare 3.1x/4.0, select the "ODI" option from the PC-NFS installation screen. This option works with the ODI driver included in the provided driver diskette. Copy the files listed below into the \NFS directory of your hard disk. These files will be used in the installation. File Description ------------ ----------------------------------------- NFSODI.SYS PC-NFS driver program LANEN.EXE PC card enabler LE100ODI.COM ODI driver program LSL.COM NetWare Link Support Layer IPXODI.COM NetWare IPX/SPX Protocol NETX.EXE NetWare Workstation Shell The following lists the contents of the configuration files: CONFIG.SYS AUTOEXEC.BAT ---------- ------------ SWITCHES=/F SET TZ=EST5EDT DEVICE=C:\HIMEM.SYS C:\DOS\SMARTDRV.EXE DEVICE=C:\EMM386.EXE NOEMS RAM @PROMPT $p$g DOS=HIGH,UMB PATH=C:\NFS;C:\WINDOWS;C:\DOS; BUFFERS=10,0 SET TEMP=C:\DOS FILES=40 SET NFSDRIVE=C STACKS=0,0 SET NFSPATH=C:\NFS LASTDRIVE=G SET TN_DIR=C:\NFS\TELNET LANEN SHELL=C:\DOS\COMMAND.COM C:\DOS /P LSL DEVICE=C:\NFS\PCNFS.SYS /l40 LE100ODI DEVICE=C:\NFS\SOCKDRV.SYS C:\NFS\PRT * DEVICE=C:\NFS\NFSODI.SYS /b2 C:\NFS\NET INIT IPXODI NETX NET.CFG ÄÄÄÄÄÄÄ Link driver LE100ODI INT 11 PORT 320 Frame Ethernet_802.3 Frame Ethernet_II Protocol IPX 0 Ethernet_802.3 If your Novell FILE SERVER is configured to use the Ethernet_802.3 frame type, add a /b2 switch to the line DEVICE=C:\NFS\NFSODI.SYS in your CONFIG.SYS file and add an entry in your NET.CFG file defining the two frames types.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.