NET6200.INF Driver File Contents (6200P2_M.ZIP)

; NET6200.INF
;

[version]
LayoutFile=layout.inf
signature="$CHICAGO$"
Class=Net
provider=%V_MS%

[Manufacturer]
%V_NB%=NB

[NB]
;; %*TEN6200.DeviceDesc%=*TEN6200.ndi, *TEN6200    ; PnP  Mode
;; %*TEN6200.DeviceDesc1%=*TEN6200J.ndi, *TEN6200    ; Jumpless Mode
%*TEN6200.DeviceDesc1%=*TEN6200J.ndi, PCMCIA\DANPEX-EN-6200P2-4E77
;****************************************************************************
;    *TEN6200   Jumpless mode
;****************************************************************************

[*TEN6200J.ndi]
AddReg=*TEN6200J.ndi.reg,EN6200T.ndi.reg,EN6200T.params.reg
LogConfig=*TEN6200J.LogConfig

[*TEN6200J.ndi.reg]
HKR,Ndi,DeviceID,,"PCMCIA\DANPEX-EN-6200P2"
HKR,Ndi,CardType,,"PCMCIA"

[*TEN6200J.LogConfig]
IRQConfig=3,4,5,9,10,11,12,15
IOConfig=20@200-3FF%FFE0(3FF::)
ConfigPriority=HARDRECONFIG


;****************************************************************************
;    *TEN6200   PnP Mode
;****************************************************************************

;; [*TEN6200.ndi]
;; AddReg=*TEN6200.ndi.reg,EN6200T.ndi.reg,Clone.params.reg
;; LogConfig=*TEN6200.LogConfig
;;
;; [*TEN6200.ndi.reg]
;; HKR,Ndi,DeviceID,,"*TEN6200"
;;
;; [*TEN6200.LogConfig]
;; IRQConfig=3,4,5,9,10,11,12,15
;; IOConfig=20@200-3FF%FFE0(3FF::)
;; ConfigPriority=HARDRECONFIG
;;

;****************************************************************************
; EN6200T Drivers
;****************************************************************************
; Base section for EN6200T
[EN6200T.ndi.reg]
; key,subkey,valuname,type,value
HKR,,DevLoader,,*ndis
HKR,,DeviceVxDs,,EN6200T.sys
HKR,,EnumPropPages,,"netdi.dll,EnumPropPages"
; NDIS Info
HKR,NDIS,LogDriverName,,"EN6200T"
HKR,NDIS,MajorNdisVersion,1,03
HKR,NDIS,MinorNdisVersion,1,0A
HKR,NDIS\NDIS2,DriverName,,"MS2000$"
HKR,NDIS\NDIS2,FileName,,"ne2000.dos"
HKR,NDIS\ODI,DriverName,,"NE2000"
HKR,NDIS\ODI,FileName,,"ne2000.com"
; Interfaces
HKR,Ndi\Interfaces,DefUpper,,"ndis2,ndis3"
HKR,Ndi\Interfaces,DefLower,,"ethernet"
HKR,Ndi\Interfaces,UpperRange,,"ndis2,ndis3,odi"
HKR,Ndi\Interfaces,LowerRange,,"ethernet"
; Install sectioins
HKR,Ndi\Install,ndis3,,"EN6200T.ndis3"
;HKR,Ndi\Install,ndis2,,"ne2000.ndis2"
;HKR,Ndi\Install,odi,,"ne2000.odi"


; Install NDIS3
[EN6200T.ndis3]
CopyFiles=EN6200T.ndis3.CopyFiles
[EN6200T.ndis3.CopyFiles]
EN6200T.sys

; extra params for ne2000
[EN6200T.params.reg]
; Resources
HKR,,InterruptNumber,1,04,00,00,00
HKR,,IOBaseAddress,1,02,00,00,00
HKR,NDI\params\InterruptNumber,resc,1,04,00,00,00
HKR,Ndi\params\interruptNumber,ParamDesc,,"Interrupt Level"
HKR,NDI\params\InterruptNumber,flag,1,60,00,00,00
HKR,NDI\params\IOBaseAddress,resc,1,02,00,00,00
HKR,NDI\params\IOBaseAddress,ParamDesc,,"I/O Base Address"
HKR,NDI\params\IOBaseAddress,flag,1,20,00,00,00
;ndis2
HKR,NDI\params\Interrupt,resc,1,04,00,00,00
HKR,Ndi\params\interrupt,ParamDesc,,"Interrupt Level"
HKR,NDI\params\Interrupt,flag,1,10,00,00,00
HKR,NDI\params\IOBase,resc,1,02,00,00,00
HKR,NDI\params\IOBase,ParamDesc,,"I/O Base Address"
HKR,NDI\params\IOBase,flag,1,10,00,00,00

; extra params for clones
[Clone.params.reg]
; Resources
HKR,,InterruptNumber,1,04,00,00,00
HKR,,IOBaseAddress,1,02,00,00,00
HKR,NDI\params\InterruptNumber,resc,1,04,00,00,00
HKR,Ndi\params\interruptNumber,ParamDesc,,"Interrupt Level"
HKR,NDI\params\InterruptNumber,flag,1,60,00,00,00
HKR,NDI\params\IOBaseAddress,resc,1,02,00,00,00
HKR,NDI\params\IOBaseAddress,ParamDesc,,"I/O Base Address"
HKR,NDI\params\IOBaseAddress,flag,1,20,00,00,00
;ndis2
HKR,NDI\params\Interrupt,resc,1,04,00,00,00
HKR,Ndi\params\interrupt,ParamDesc,,"Interrupt Level"
HKR,NDI\params\Interrupt,flag,1,10,00,00,00
HKR,NDI\params\IOBase,resc,1,02,00,00,00
HKR,NDI\params\IOBase,ParamDesc,,"I/O Base Address"
HKR,NDI\params\IOBase,flag,1,10,00,00,00

;****************************************************************************
; Destination Directories
;****************************************************************************
[DestinationDirs]
DefaultDestDir              =11 ; LDID_SYS
EN6200T.ndis3.CopyFiles      =11
ne2000.ndis2.CopyFiles      =26 ; LDID_WINBOOT
ne2000.odi.CopyFiles        =26

;****************************************************************************
; Localizable Strings
;****************************************************************************
[strings]
; Provider
V_MS="Microsoft"
; Manufacturers
V_NB=" "

;; *TEN6200.DeviceDesc="EN6200T PnP Adapter"
*TEN6200.DeviceDesc1="EN-6200P2 Ethernet PCMCIA Adapter"

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 4.21