32bit PCI Bus to 10/100/1000Base-T Ethernet Adapter
NetWare Server Driver Installation Overview
Contents:
1. Driver Installation for NetWare Server
2. Parameters Description
===============================================================================
1. Driver Installation for NetWare Server
** Driver Installation for NetWare Server 3.12 **
a. Insert Driver Diskette in your PC's floppy drive (A: or B:).
b. Change to the NetWare Server directory.
c. Copy the following files from Driver Diskette to the NetWare
Server directory.
\NOVELL\SERVER\3.12\NBI31X.NLM
\NOVELL\SERVER\3.12\MSM31X.NLM
\NOVELL\SERVER\ETHERTSM.NLM
\NOVELL\SERVER\MTD80X.LAN
d. Sample AUTOEXEC.NCF for NetWare Server 3.12
AUTOEXEC.NCF
============
LOAD C:NBI31X
LOAD C:MSM31X
LOAD C:ETHERTSM
LOAD C:MTD80X SLOT=2 FRAME=ETHERNET_802.2 NAME=MY_8022
LOAD C:MTD80X SLOT=2 FRAME=ETHERNET_802.3 NAME=MY_8023
LOAD C:MTD80X SLOT=2 FRAME=ETHERNET_II NAME=MY_II
LOAD C:MTD80X SLOT=2 FRAME=ETHERNET_SNAP NAME=MY_SNAP
BIND IPX MY_8022 NET=10
BIND IPX MY_8023 NET=20
BIND IPX MY_II NET=30
BIND IPX MY_SNAP NET=40
** Driver Installation for NetWare Server 4.X **
a. Update Netware Server to 4.2 .
(If dont update to 4.2, use diskette update file "MSM.NLM,
ETHERTSM.NLM")
b. Run NetWare Server System .
c. When the Server prompt appears, load the NetWare Server
Installation Utility ==> "LOAD INSTALL"
d. Select "Driver options" from the "Installtion Options" menu.
e. Select "Configure network drivers" from the "Driver Options" menu.
f. Select "Select a driver" from the "Additional Driver Actions" menu
g. Press <Ins> to install a unlisted driver, then press <F3> to
specify a different path.
h. Insert Driver Diskette in your PC's floppy drive and specify
the path A:\NWSERVER.
i. Select "32bit PCI Bus to 10/100/1000Base-T Ethernet Driver" from
the "Select a driver to install:" menu.
j. If necessary, select "Select/Modify driver parameters and
protocols" from the "Board MTD80X_1 (Driver MTD80X) Actions" memu.
k. Follow instructions to complete driver installation.
** Driver Installation for NetWare Server 5.X **
a. Run NetWare Server System .
b. When the Server prompt appears, load the NetWare Server
Installation Utility ==> "LOAD NWCONFIG"
c. Select "Driver options" from the "Installtion Options" menu.
d. Select "Configure network drivers" from the "Driver Options" menu.
e. Select "Select a driver" from the "Additional Driver Actions" menu
f. Press <Ins> to install a unlisted driver, then press <F3> to
specify a different path.
g. Insert Driver Diskette in your PC's floppy drive and specify
the path A:\NWSERVER.
h. Select "32bit PCI Bus to 10/100/1000Base-T Ethernet Driver" from
the "Select a driver to install:" menu.
i. If necessary, select "Select/Modify driver parameters and
protocols" from the "Board MTD80X_1 (Driver MTD80X) Actions" memu.
j. Follow instructions to complete driver installation.
Sample AUTOEXEC.NCF for NetWare Server
AUTOEXEC.NCF (one board)
========================
LOAD MTD80X SLOT=2 FRAME=ETHERNET_802.2 NAME=MY_8022
LOAD MTD80X SLOT=2 FRAME=ETHERNET_802.3 NAME=MY_8023
LOAD MTD80X SLOT=2 FRAME=ETHERNET_II NAME=MY_II
LOAD MTD80X SLOT=2 FRAME=ETHERNET_SNAP NAME=MY_SNAP
BIND IPX MY_8022 NET=10
BIND IPX MY_8023 NET=20
BIND IPX MY_II NET=30
BIND IPX MY_SNAP NET=40
2. Parameter Description
The following parameters are used in MTD80X.LAN.
a. SLOT : Specifies which adapter is enabled when multiple MTD80X based
adapters are found in your computer.
Ex: LOAD MTD80X SLOT=3 FRAME=ETHERNET_802.2
LOAD MTD80X SLOT=4 FRAME=ETHERNET_II
b. FRAME : Specifies which frame type is used by the driver. Accepted
values are Ethernet_802.2, Ethernet_802.3, Ethernet_II and
Ethernet_SNAP.
Ex: LOAD MTD80X FRAME=ETHERNET_802.2
LOAD MTD80X FRAME=ETHERNET_802.3
LOAD MTD80X FRAME=ETHERNET_II
LOAD MTD80X FRAME=ETHERNET_SNAP
c. NODE : Use a different address to replace the node address burned
in EEPROM.
Ex: LOAD MTD80X NODE=0040C7888888
4. SPEED : Specifies which medium type is used by the driver.
Accepted vaules are AUTO,1000FULL,1000HALF,100FULL
,100HALF,10FULL and 10HALF.
Ex: LOAD MTD80X SLOT=3 FRAME=ETHERNET_802.2 SPEED=100FULL
-- End of File --
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.