;; NETRTP.INF ;; ;; Ethernet RTL8029(AS) PCI Bus Network Interface Cards. ;; (NDIS 3.0 driver) ;; [Version] Signature="$CHICAGO$" Class=Net ClassGUID={4d36e972-e325-11ce-bfc1-08002be10318} Provider=%V_MS% [Manufacturer] %V_Ethernet%=Ethernet [Ethernet] ;%PCINT.DeviceDesc%=pcint.ndi,PCI\VEN_10EC&DEV_8029&SUBSYS_802910EC %PCINT.DeviceDesc%=pcint.ndi,PCI\VEN_10EC&DEV_8029 [SourceDisksNames] 99="Ethernet RTL8029(AS) PCI Bus Adapter Driver Disk",,0 [SourceDisksFiles] rtl8029.sys =99,,rtl8029.sys,12345 netrtp.inf =99,,netrtp.inf,1234 ;pcind.dos =99,,pcind.dos,12345 ;pciodi.com =99,,pciodi.com,12345 [pcint.ndi] AddReg=pcint.ndi.reg,rtlrtp.ndi.reg,pci029.ndi.reg ;;**************************************************************************** ;; *RTL8029 Ethernet RTL8029 ;;**************************************************************************** [pcint.ndi.reg] HKR,Ndi,DeviceID,0,"PCI\VEN_10EC&DEV_8029&SUBSYS_802910EC" HKR,Ndi\Install,,0,pcint.install HKR,NDI\Params\DuplexMode,flag,1,30,00,00,00 ;HKR,NDI\Params\NetworkAddress,flag,1,30,00,00,00 HKR,Ndi\params\DuplexMode,ParamDesc,0,"Duplex Mode" HKR,Ndi\params\DuplexMode,type,0,enum HKR,Ndi\params\DuplexMode,default,0,0 HKR,Ndi\params\DuplexMode\enum,0,0,"Half Duplex (Default)" HKR,Ndi\params\DuplexMode\enum,1,0,"Full Duplex" ;HKR,Ndi\params\NetworkAddress,ParamDesc,0,"Network Address" ;HKR,Ndi\params\NetworkAddress,type,0,edit ;HKR,Ndi\params\NetworkAddress,default,0,"000000000000" ;HKR,Ndi\params\NetworkAddress,LimitText,0,12 ;HKR,Ndi\params\NetworkAddress,UpperCase,0,1 ;HKR,Ndi\params\NetworkAddress,Optional,0,1 ;;**************************************************************************** ;; ;;**************************************************************************** [rtlrtp.ndi.reg] ; key,subkey,valuname,type,value HKR,,DriverDesc,0,"Ethernet RTL8029(AS) PCI Bus NIC" HKR,,DevLoader,0,*ndis HKR,,DeviceVxDs,0,rtl8029.sys HKR,,EnumPropPages,0,netdi.dll,EnumPropPages ; NDIS Info HKR,NDIS,MajorNdisVersion,1,03 HKR,NDIS,MinorNdisVersion,1,0a HKR,NDIS,LogDriverName,0,"PCINT" ;HKR,NDIS\NDIS2,DriverName,0,"PCIND$" ;HKR,NDIS\NDIS2,FileName,0,"pcind.dos" ;HKR,NDIS\ODI,DriverName,0,"pciodi" ;HKR,NDIS\ODI,FileName,0,"pciodi.com" ; Interfaces HKR,Ndi\Interfaces,DefLower,0,"ethernet" HKR,Ndi\Interfaces,LowerRange,0,"ethernet" ;HKR,Ndi\Interfaces,DefUpper,0,"ndis2,ndis3" ;HKR,Ndi\Interfaces,UpperRange,0,"ndis2,ndis3,odi" HKR,Ndi\Interfaces,DefUpper,0,"ndis3" HKR,Ndi\Interfaces,UpperRange,0,"ndis3" ; Install sections HKR,Ndi\Install,ndis3,0,"rtlrtp.ndis3" ;HKR,Ndi\Install,ndis2,0,rtlrtp.ndis2 ;HKR,Ndi\Install,odi,0,rtlrtp.odi ;;**************************************************************************** ;; PCI common parameters ;;**************************************************************************** [pci029.ndi.reg] ;;params HKR,,MediaType,0,1 HKR,,AdapterType,0,5 HKR,,BusType,0,5 ;; Resources ;HKR,,InterruptNumber,1,04,00,00,00 ;HKR,,IOBaseAddress,1,02,00,00,00 ;HKR,NDI\params\InterruptNumber,resc,1,04,00,00,00 ;HKR,Ndi\params\interruptNumber,ParamDesc,0,"Interrupt Level" ;HKR,NDI\params\InterruptNumber,flag,1,20,00,00,00 ;HKR,NDI\params\IOBaseAddress,resc,1,02,00,00,00 ;HKR,NDI\params\IOBaseAddress,ParamDesc,0,"I/O Base Address" ;HKR,NDI\params\IOBaseAddress,flag,1,20,00,00,00 ;;ndis2 ;HKR,NDI\params\Interrupt,resc,1,04,00,00,00 ;HKR,Ndi\params\interrupt,ParamDesc,0,"Interrupt Level" ;HKR,NDI\params\Interrupt,flag,1,10,00,00,00 ;HKR,NDI\params\IOBase,resc,1,02,00,00,00 ;HKR,NDI\params\IOBase,ParamDesc,0,"I/O Base Address" ;HKR,NDI\params\IOBase,flag,1,10,00,00,00 ;;**************************************************************************** ;; Drivers ;;**************************************************************************** ;; Install NDIS3 [rtlrtp.ndis3] CopyFiles=rtlrtp.ndis3.CopyFiles,pcint.inf.CopyFiles DelFiles=pcint.DelFiles [rtlrtp.ndis3.CopyFiles] rtl8029.sys,,,2 [pcint.inf.CopyFiles] netrtp.inf,,,2 [pcint.DelFiles] netrt.inf,,,1 drvidx.bin,,,1 drvdata.bin,,,1 ;;Install NDIS2 ;[rtlrtp.ndis2] ;CopyFiles=rtlrtp.ndis2.CopyFiles ;[rtlrtp.ndis2.CopyFiles] ;pcind.dos,,,2 ;;Install ODI ;[rtlrtp.odi] ;CopyFiles=rtlrtp.odi.CopyFiles ;[rtlrtp.odi.CopyFiles] ;pciodi.com,,,2 ;;**************************************************************************** ;; Destination Directories ;;**************************************************************************** [DestinationDirs] DefaultDestDir =11 ; LDID_SYS rtlrtp.ndis3.CopyFiles =11 ;rtlrtp.ndis2.CopyFiles =26 ; LDID_WINBOOT ;rtlrtp.odi.CopyFiles =26 pcint.inf.CopyFiles =17 ; INF pcint.DelFiles =17 ;;**************************************************************************** ;; Localizable Strings ;;**************************************************************************** [strings] ;;Provider V_MS="Microsoft" ;;Manufacturers V_Ethernet="Ethernet" ;;PCI Ethernet Devices PCINT.DeviceDesc="Ethernet RTL8029(AS) PCI Bus Adapter"Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.