Server Driver for NetWare 5.00 Introduction: ------------- This document describes the procedure to install the NetWare v5.00 server driver for 10/100 Fast Ethernet PCI Adapter. Location of Driver: \NWSERVER\500\RTSSRV.LAN Installaton Procedure : --------------------- Before you start with the installation process, make sure that the Novell NetWare v5.00 server is properly installed. Similarly, your adapter should also be properly installed in your server. 1. Insert the Driver Diskette into drive A and check the contents of subdirectory \NWSERVER\500, It should contain the following file : RTSSRV.LANÄÄÄ Novell NetWare V5.00 Server Driver RTSSRV.LDIÄÄÄ Novell NetWare V5.00 Server Driver Installation Information File 2. At the NetWare prompt (indicated by the Server name), run the INSTALL.NLM program by typing: server name: LOAD INSTALL <Enter> 3. Select "Maintenance/Selective Install" and press <Enter>. 4. Select " LAN Driver Options (Configure/Load/...) " and press <Enter>. 5. Press the <Ins> key to specify other drivers to install. 6. Press <F3> and specify the driver path (A:\NWSERVER\500) and press <Enter>. 7. The RTSSRV.LAN driver should appear in your choice list for the 'Select a LAN Driver' field. Choose this driver to start the driver loading and binding procedure. This will allow you to load and bind all 4 frame types supported by NetWare. 8. Add the LOAD and BIND statements you require to the server's AUTOEXEC.NCF file so that the LAN driver will load automatically each time the server starts up. Installation Notes: ------------------- 1.Installing Multiple LAN Adapters: The keyword "SLOT" is provided for multiple LAN adapters in a single server by the driver RTSSRV.LAN. So, add EtherID in LOAD commands. For example: LOAD RTSSRV FRAME=Ethernet_802.2 NAME=LAN_A SLOT=1 BIND IPX TO LAN_A NET=11 LOAD RTSSRV FRAME=Ethernet_802.2 NAME=LAN_B SLOT=2 BIND IPX TO LAN_B NET=22 2. The keywords "MEDIUM"="AUTO","100HALF","100FULL","10HALF","10FULL" are provided for specifying adapter's 10M/100M/Half/Full Duplex mode ,add MEDIUM in LOAD commands. For example: LOAD RTSSRV FRAME=Ethernet_802.2 NAME=LAN_A SLOT=1 MEDIUM=100HALF BIND IPX TO LAN_A NET=11Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.