Windows 2000
Introduction:
-------------
This document describes the procedure to install Windows 2000
driver for Realtek RTL8139 PCI Fast Ethernet adapter.
Location of Windows 2000 Driver : \WIN2K\RTL8139.SYS
Installing driver procedure on Microsoft Windows 2000 :
-------------------------------------------------------------------
Before you start with the installation process, make sure that your
adapter should be properly installed in your PCI bus slot.
Executing Windows2000, it will auto-detect your system
configuration and find the adapter hardware. (If Windows 2000 does not
prompt that it detects the PCI Ethernet adapter,there must be something
wrong with the RTL8139 PCI Fast Ethernet adapter or your system
enviroment.)
1. Ask you to select which driver you want to install, select "Driver
from disk provided by hardware manufacturer".
2. Insert the Realtek RTL8139 driver disk into drive A and specify
the setup file pathname A:\WIN2K (for Windows 2000).
3. Windows2000 will appear some messages to insert Windows2000 system
disk to complete setup step.
4. Windows2000 will finish the other installation procedure
automatically, then you restart the system.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.