;***********************************************************************
;
; OEMSETNT.INF Rev:SXXXXXX-XXX
;
; Interphase 5535/5536 RAS SUPPORT
;
; SETUP INF file.
;
; Version 1.14.000 04/20/1999
;
; History:
; TSE 12-JUN-1997 Create (Copy from V5)
; TSE 19-NOV-1997 Add Help Files
; TSE 21-NOV-1997 Rename Product
; TSE 02-DEC-1997 Remove Adpater if Synsys
; already uninstalled
; TSE 24-Jun-1998 Install with Network,WAD rep BASE
; TSE 25-Aug-1998 DM Support SYNISDN/SYNDM
; TSE 20-Oct-1998 IPHWAN
; TSE 18-Dec-1998 Detect WanSetup
; TSE 01-Jan-1999 Compatibility Win 2000
; TSE 16-Feb-1999 Install Virtual Motion
; TSE 01-MAR-1999 Rename IPHWAN -> IPHISND/IPHDM
; TSE 20-Apr-1999 Add SecurID files
;
;***********************************************************************
[Identification]
OptionType = NetAdapter
;***********************************************************************
;
;***********************************************************************
[Options]
IPHISDN
IPHDM
;***********************************************************************
;
;***********************************************************************
[FileConstants]
;
; File names, etc.
;
UtilityInf = "UTILITY.INF"
OtherInf = "OTHER.INF"
ParamInf = "NCPARAM.INF"
subroutineinf = "SUBROUTN.INF"
InstallProg = "SETUP.EXE"
InstallInf = "SETUP.INF"
WanSetup = "SYNCV6.CPL"
SoftwareType = "driver"
DllName = "CNDISWAN.DLL"
SWAInfName = "OEMNADW6.INF"
DllMajVersion = "2"
DllCurVersion = ""
DllMajCurVersion = ""
Exit_Code = 0
InstallSynSYS = 1
;
; Product Info
;
Manufacturer = "Interphase"
ProductMajorVersion = "1"
ProductMinorVersion = "0"
ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion)
;
; Language
;
NLSKeyName = "SYSTEM\CurrentControlSet\Control\Nls\Language"
UserKeyLang = "Control Panel\International"
LANG_FRENCH = "0C"
;
; EventLog Message File
;
NetEventDLL = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll"
;
; Définitions driver carte SYNSYS
;
CardDriverName = "SynSYS"
SynOSDriverName = "SynSV6"
CardDriverINF = "BASE.INF"
SldInstallPath = "BASE"
IphKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)
CardDriverKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(CardDriverName)"\CurrentVersion"
CardDriverPath = "" ; Répertoire d'install de SynSYS
; Définitions Virtual Motion
;
InstallVMProg = "SETUP.EXE"
InstallVMPath = "VM144"
VMKeyName = $(!NTN_SoftwareBase)"\Virtual Motion\Setup"
;
; Registry Key
;
; ProductOpSupport Win V4.xx
; 0x80 Présence liste / 0x04 [Supprimer] /0x02 [Propriétés] /0x01 [Mettre à jour]
;
ProductOpSupport = 134
ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"+
$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)+
"\Parameters"
EventKeyName = $(!NTN_ServiceBase)"\EventLog\System"
!NetworkCardKeyName = $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards"
[FileConstantsIPHISDN]
;
; Software
;
ProductSoftwareName = "IPHISDN"
ProductPath = $(!STF_WINDOWSSYSPATH)\drivers
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\IPHISDN.sys"
NetRuleSoftwareType = "IPHISDNSys IPHISDNDriver"
NetRuleSoftwareUse = $(SoftwareType)
NetRuleSoftwareBindForm = """IPHISDNSys"" yes no container"
NetRuleSoftwareClass = {"IPHISDNDriver basic"}
NetRuleSoftwareBindable = {"IPHISDNDriver IPHISDNAdapter non exclusive 100"}
;
; Hardware
;
ProductHardwareName = "IPHISDN"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareIPHISDNType = "IPHISDN IPHISDNAdapter"
NetRuleHardwareIPHISDNClass = {"IPHISDNAdapter basic"}
BindableIPHISDNTxt = {"IPHISDNDriver IPHISDNAdapter non exclusive 100"}
;
; TAPI
;
DeviceMap = "HARDWARE\DEVICEMAP"
TapiDevices = "TAPI DEVICES"
TapiDeviceKey = $(ProductHardwareName)
TapiMediaType = "ISDN"
[FileConstantsIPHDM]
;
; Software
;
ProductSoftwareName = "IPHDM"
ProductPath = $(!STF_WINDOWSSYSPATH)\drivers
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\IPHDM.sys"
NetRuleSoftwareType = "IPHDMSys IPHDMDriver"
NetRuleSoftwareUse = $(SoftwareType)
NetRuleSoftwareBindForm = """IPHDMSys"" yes no container"
NetRuleSoftwareClass = {"IPHDMDriver basic"}
NetRuleSoftwareBindable = {"IPHDMDriver IPHDMAdapter non exclusive 100"}
;
; Hardware
;
ProductHardwareName = "IPHDM"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareIPHDMType = "IPHDM IPHDMAdapter"
NetRuleHardwareIPHDMClass = {"IPHDMAdapter basic"}
BindableIPHDMTxt = {"IPHDMDriver IPHDMAdapter non exclusive 100"}
;
; TAPI
;
DeviceMap = "HARDWARE\DEVICEMAP"
TapiDevices = "TAPI DEVICES"
TapiDeviceKey = $(ProductHardwareName)
TapiMediaType = "DM"
;***********************************************************************
;
;***********************************************************************
[GeneralConstants]
from = ""
to = ""
ExitCodeOk = 0
ExitCodeCancel = 1
ExitCodeFatal = 2
KeyNull = ""
MAXIMUM_ALLOWED = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct = ""
KeyParameters = ""
TRUE = 1
FALSE = 0
NoTitle = 0
ExitState = "Active"
OldVersionExisted = $(FALSE)
DriverPath = $(!STF_NTPATH)\drivers
TraceMode = 0
HexChars = "abcdefABCDEF0123456789"
ERROR_SUCCESS = 0
ERROR_CANCELLED = 1223
;***********************************************************************
;
;***********************************************************************
[Date]
Now = {} ? $(!LIBHANDLE) GetSystemDate
;---------------------------------------------------------------------------
;
; Lecture des variables à partir de la DLL OEMSWA.DLL
;
;---------------------------------------------------------------------------
[InitOemSwaDll]
;
AddAdapterOk = "0" ? $(hOemSwaDll) AddAdpt $(TapiMediaType)
;***********************************************************************
;
;***********************************************************************
[Identify]
Read-Syms Identification
set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
set Media = #("Source Media Descriptions", 1, 1)
Return $(Status) $(Identifier) $(Media)
;-----------------------------------------------------------------------
; Trace
; ------------------
; Fonction de trace dans une Message Box
;
; ENTREE : $($0): 1er Message à afficher
; $($1): 2ème Message à afficher
;
; SORTIE:
;
;-----------------------------------------------------------------------
[Trace]
read-syms GeneralConstants
ifstr $(TraceMode) == $(TRUE)
shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "STATUS" "... TRACE ..."+
$(!LF)$(!LF)$($0)$(!LF)$(!LF)$($1)
endif
return
;-----------------------------------------------------------------------
; FillPathEnd
; ------------------
; Ajout d'un caractère \ en fin de Path si non déjà présent
;
; ENTREE : $($0): Chaine à analiser
;
;
; SORTIE: $($R0) Chaine complétée
;
;-----------------------------------------------------------------------
[FillPathEnd]
set FillPath = $($0)
set FillList = {}
set ListSize = "0"
Split-String $(FillPath) "\" FillList
QueryListSize ListSize $(FillList)
ifstr *($(FillList),$(ListSize)) != "\"
return $($0)"\"
else
return $($0)
endif
;-----------------------------------------------------------------------
; GetDrive
; --------
; Retourne uniquement le drive d'un Path si existe
;
; ENTREE : $($0): Chaine à analiser
;
;
; SORTIE: $($R0) Chaine complétée
;
;-----------------------------------------------------------------------
[GetDrive]
set FillPath = $($0)
set FillList = {}
set ListSize = "0"
Split-String $(FillPath) ":" FillList
ifstr *($(FillList),2) != ":"
return "\"
else
return *($(FillList),1)":\"
endif
;-----------------------------------------------------------------------
; GetUserLanguage
; ---------------
; Recherche de la langue en cours pour l'utilisateur
;
; ENTREE : $($0): Language to use
;
;
; SORTIE:
;
;-----------------------------------------------------------------------
[GetUserLanguage]
; Par défaut langage courant
set !USER_LANGUAGE = $($0)
Read-Syms GeneralConstants
Read-Syms FileConstants
OpenRegKey $(!REG_H_CUSER) "" $(UserKeyLang) $(MAXIMUM_ALLOWED) KeyUserLang
ifstr $(KeyUserLang) != $(KeyNull)
;
; Lecture code langue
;
GetRegValue $(KeyUserLang),"Locale",LocaleLang
ifint $(RegLastError) == $(!REG_ERROR_SUCCESS)
Split-String *($(LocaleLang),4) $(HexChars) LocaleChars
set UserLang = *($(LocaleChars),7)*($(LocaleChars),8)
ifstr(i) $(UserLang) == $(LANG_FRENCH)
set !USER_LANGUAGE = "FRA"
endif
endif
CloseRegKey $(KeyUserLang)
endif
return
;-----------------------------------------------------------------------
; IsNetcardInstalled
; ------------------
; Recherche si une carte réseau est installée
;
; ENTREE :
;
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL
; STATUS_FAILED
; $($R1): TRUE / FALSE
;
;-----------------------------------------------------------------------
[IsNetcardInstalled]
Set Status = STATUS_FAILED
Set fNetcardInstalled = FALSE
Set KeyNull = ""
set NetworkCardKey = $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" $(!NetworkCardKeyName) $(!MAXIMUM_ALLOWED) NetworkCardKey
Ifstr(i) $(NetworkCardKey) != $(KeyNull)
set NetcardsList = {}
EnumRegKey $(NetworkCardKey) NetcardsList
Ifint $(RegLastError) != $(!REG_ERROR_SUCCESS)
Debug-Output "IsNetcardInstalled: EnumRegKey failed."
goto IsNetcardInstalledEnd
endif
ForListDo $(NetcardsList)
set KeyName = *($($),1)
set Card = $(KeyNull)
OpenRegKey $(NetworkCardKey) "" $(KeyName) $(!MAXIMUM_ALLOWED) Card
ifstr $(Card) == $(KeyNull)
Debug-Output "IsNetcardInstalled: could not open netcard key "$(KeyName)
else
GetRegValue $(Card), "ProductName" ProductNameInfo
Ifint $(RegLastError) != $(!REG_ERROR_SUCCESS)
Debug-Output "IsNetcardInstalled: ProductName not found."
else
set CardProductName = *($(ProductNameInfo), 4)
Debug-Output "IsNetcardInstalled: ProductName. "$(CardProductName)
ifstr(i) $(CardProductName) != "NdisWan"
ifstr(i) $(CardProductName) != "NdisWanDialin"
ifstr(i) $(CardProductName) != "NdisWanDialout"
ifstr(i) $(CardProductName) != "NdisWanDialinIp"
ifstr(i) $(CardProductName) != "NdisWanDialoutIp"
ifstr(i) $(CardProductName) != "NdisWanDialinoutIpx"
ifstr(i) $(CardProductName) != "AsyncMac"
ifstr(i) $(CardProductName) != "PCIMAC"
ifstr(i) $(CardProductName) != "SYNWAN"
ifstr(i) $(CardProductName) != "IPHISDN"
ifstr(i) $(CardProductName) != "IPHDM"
Debug-Output "found installed netcard"
set fNetcardInstalled = TRUE
set Status = STATUS_SUCCESSFUL
CloseRegKey $(Card)
goto IsNetcardInstalledEnd
endif
endif
endif
endif
endif
endif
endif
endif
endif
endif
endif
endif
CloseRegKey $(Card)
endif
EndForListDo
set Status = STATUS_SUCCESSFUL
else
Debug-Output "IsNetcardInstalled: failed to open "$(!NetworkCardKeyName)
endif
IsNetcardInstalledEnd =+
ifstr(i) $(NetworkCardKey) != $(KeyNull)
CloseRegKey $(NetworkCardKey)
endif
Return $(Status) $(fNetcardInstalled)
;------------------------------------------------------------------------
; 2. ReturnOptions:
;
; DESCRIPTION: To return the option list supported by this INF and the
; localised text list representing the options.
;
;
; INPUT: $($0): Language used. ( ENG | FRA | ... )
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL |
; STATUS_NOLANGUAGE
; STATUS_FAILED
; STATUS_NOTSUPPORTED
;
; $($R1): Option List
; $($R2): Option Text List
;------------------------------------------------------------------------
[ReturnOptions]
set Status = STATUS_FAILED
set OptionList = {}
set OptionTextList = {}
set LanguageList = ^(LanguagesSupported, 1)
IfContains(i) $($0) not-in $(LanguageList)
set Status = STATUS_NOLANGUAGE
goto ExitReturnOptions
endif
;
; Détection langage réel
;
shell "" GetUserLanguage $($0)
SetOptions = +
set OptionList = ^(Options, 1)
set OptionTextList = ^(OptionsText$(!USER_LANGUAGE),1)
set Status = STATUS_SUCCESSFUL
ExitReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
;-----------------------------------------------------------------------
; InstallVMotion
; -----------------
; Installation Virtual Motion
;
; ENTREE : $($0): Language to use
; $($1): SrcDir
;
;
; SORTIE: $($R0): STATUS: STATUS_SUCCESSFUL Installation OK
; STATUS_FAILED Erreur d'install
; STATUS_USERCANCEL Arrêt utilisateur
; STATUS_SHELL_ERROR Erreur de Shell
; $($R1): SrcDir
;
;-----------------------------------------------------------------------
[InstallVMotion]
Read-Syms GeneralConstants
Read-Syms FileConstants
read-syms FileConstants$($0)
; Détection VM dans la registry
OpenRegKey $(!REG_H_LOCAL) "" $(VMKeyName) $(MAXIMUM_ALLOWED) KeyVM
ifstr $(KeyVM) != $(KeyNull)
goto EndInstallVM
endif
CloseRegKey $(KeyVM)
set SrcDir = $($1)
;
; Saisie du répertoire source si pas déjà fait pour OEMSETNT.INF
;
ifstr(i) $(!STF_SRCDIR_OVERRIDE) != ""
set SrcDir = $(!STF_SRCDIR_OVERRIDE)
else
GetDiskPath = +
Shell $(OtherInf), DoDiskette, $(!STF_LANGUAGE) "" $(SrcDir)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
set ExitCode = STATUS_SHELL_ERROR
goto EndInstallVM
else-ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
set ExitCode = STATUS_SHELL_ERROR
goto EndInstallVM
endif
set ExitCode = STATUS_FAILED
goto EndInstallVM
else-ifstr(i) $($R0) == STATUS_USERCANCEL
set ExitCode = STATUS_USERCANCEL
goto EndInstallVM
endif
set SrcDir = $($R1)
set !STF_SRCDIR_OVERRIDE = $($R1)
endif
; Recherche Drive d'install
shell "" GetDrive $(SrcDir)
; Calcul Path D'installation
set InstallPath = $($R0)$(InstallVMPath)\$(InstallVMProg)
; Analyse si fichier Présent
LibraryProcedure ExitCode, $(!LIBHANDLE), CheckFileExistance $(InstallPath)
ifstr(i) $(ExitCode) != YES
goto EndInstallVM
endif
StartDetachedProcess ExitCode "Virtual Motion" "" $(InstallPath)
EndInstallVM = +
return
;-----------------------------------------------------------------------
; InstallLinkDriver
; -----------------
; Installation ou désinstallation du driver SynSYS
;
; ENTREE : $($0): Language to use
; $($1): SrcDir
; $($2): "INSTALL" ou "REMOVE"
;
;
; SORTIE: $($R0): STATUS: STATUS_SUCCESSFUL Installation OK
; STATUS_FAILED Erreur d'install
; STATUS_USERCANCEL Arrêt utilisateur
; STATUS_SHELL_ERROR Erreur de Shell
; $($R1): SrcDir
;
;-----------------------------------------------------------------------
[InstallLinkDriver]
Read-Syms GeneralConstants
Read-Syms FileConstants
read-syms FileConstants$($0)
set SrcDir = $($1)
;
; Saisie du répertoire source si pas déjà fait pour OEMSETNT.INF
;
ifstr(i) $($2) != "REMOVE"
set InstallParam = "/F:"$(CardDriverINF)
ifstr(i) $(!STF_SRCDIR_OVERRIDE) != ""
set SrcDir = $(!STF_SRCDIR_OVERRIDE)
else
GetDiskPath = +
Shell $(OtherInf), DoDiskette, $(!STF_LANGUAGE) "" $(SrcDir)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
set ExitCode = STATUS_SHELL_ERROR
goto EndInstallLink
else-ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
set ExitCode = STATUS_SHELL_ERROR
goto EndInstallLink
endif
set ExitCode = STATUS_FAILED
goto EndInstallLink
else-ifstr(i) $($R0) == STATUS_USERCANCEL
set ExitCode = STATUS_USERCANCEL
goto EndInstallLink
endif
set SrcDir = $($R1)
set !STF_SRCDIR_OVERRIDE = $($R1)
endif
else
set InstallParam = "/U /F:"$(CardDriverINF)
endif
; Calcul nouveau Path
shell "" FillPathEnd $(SrcDir)
ifstr(i) $($2) == "INSTALL"
set InstallPath = $($R0)$(SldInstallPath)\$(InstallProg)
set InfPath = $($R0)$(SldInstallPath)\$(CardDriverINF)
else
set InstallPath = $($R0)$(InstallProg)
set InfPath = $($R0)$(CardDriverINF)
endif
; Analyse si fichier .INF présent sauf si mode Remove
LibraryProcedure ExitCode, $(!LIBHANDLE), CheckFileExistance $(InfPath)
ifstr(i) $(ExitCode) != YES
; Pas de suppression si SLD installé à part
ifstr(i) $($2) == "REMOVE"
set ExitCode = STATUS_SUCCESSFUL
goto EndInstallLink
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING" +
$(FileNotFound)$(!LF)$(CardDriverINF)$(!LF)$(!LF)$(GetAnotherPath)
goto GetDiskPath
endif
; Analyse si fichier Install présent
LibraryProcedure ExitCode, $(!LIBHANDLE), CheckFileExistance $(InstallPath)
ifstr(i) $(ExitCode) != YES
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING" +
$(FileNotFound)$(!LF)$(InstallProg)$(!LF)$(!LF)$(GetAnotherPath)
goto GetDiskPath
endif
RunProgram ExitCode "Interphase 553X Base Driver" "" $(InstallPath) $(InstallParam)
; Analyse code de sortie
ifstr(i) $(ExitCode) == $(ERROR_SUCCESS)
set ExitCode = STATUS_SUCCESSFUL
else-ifstr(i) $(ExitCode) == $(ERROR_CANCELLED)
set ExitCode = STATUS_USERCANCEL
else
set ExitCode = STATUS_FAILED
endif
EndInstallLink = +
return $(ExitCode) $(SrcDir)
;------------------------------------------------------------------------
;
; InstallOption:
;
; This section is shelled to by main installation processing
; or by NCPASHEL.INF during reconfig, removal, update, etc.
;
;
; FUNCTION: To copy files representing Options
; To configure the installed option
; To update the registry for the installed option
;
; INPUT: $($0): Language to use
; $($1): OptionID to install
; $($2): SourceDirectory
; $($3): AddCopy (YES | NO)
; $($4): DoCopy (YES | NO)
; $($5): DoConfig (YES | NO)
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL |
; STATUS_NOLANGUAGE |
; STATUS_USERCANCEL |
; STATUS_FAILED
;
;------------------------------------------------------------------------
[InstallOption]
shell "" GetUserLanguage $($0)
set Option = $($1)
set SrcDir = $($2)
set RasDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
set hOemSwaDll = "" ; Handle Sur DLL
set LibPath = $(!STF_WINDOWSSYSPATH) ; Chemin d'accès à la DLL
set Status = STATUS_FAILED
set DelFiles = $(TRUE)
; Test si langage demandé est supporté
set LanguageList = ^(LanguagesSupported, 1)
IfContains(i) $($0) NOT-IN $(LanguageList)
Return STATUS_NOLANGUAGE
endif
Set-Subst LF = "\n"
Set-Subst CR = "\r"
Read-Syms GeneralConstants
Read-Syms FileConstants$(Option)
Read-Syms FileConstants
Read-Syms DialogConstants$(!USER_LANGUAGE)
; Analyse si Phase d'installation de WinDows NT !NTN_Origination = "install"
; ou NetWork Control Panel !NTN_Origination = "ncpa"
ifstr(i) $(!NTN_Origination) == "NCPA"
set Continue = $(OK)
endif
Read-Syms FileConstants$(Option)$(!USER_LANGUAGE)
Read-Syms FileConstants$(!USER_LANGUAGE)
Detect Date
Set-Title $(FunctionTitle)
set to = Begin
set from = Begin
set CommonStatus = STATUS_SUCCESSFUL
set !UG_Filename = $(SWAInfName)
EndWait
;-----------------------------------------------
;
; ANALYSE DU MODE D'INSTALLATION
; et initialisation des variables qui en dépendent
;
;-----------------------------------------------
Begin = +
set DetectionCardDriver = $(FALSE)
;
; Désinstallation
;
ifstr(i) $(!NTN_InstallMode) == deinstall
set StartLabel = RemoveAdapter
set DetectionCardDriver = $(TRUE)
;
; Mise à jour
;
else-ifstr(i) $(!NTN_InstallMode) == update
set StartLabel = UpgradeSoftware
set DetectionCardDriver = $(TRUE)
set LibPath = $(SrcDir)
;
; Bind
;
else-ifstr(i) $(!NTN_InstallMode) == bind
set StartLabel = BindingAdapter
set DetectionCardDriver = $(TRUE)
;
; Configuration
;
else-ifstr(i) $(!NTN_InstallMode) == configure
set StartLabel = ConfigureAdapter
set DetectionCardDriver = $(TRUE)
set CommonStatus = STATUS_REBOOT
;
; Analyse si la configuration est acceptée pour ce produit
;
; NTN_RegBase = Clef du produit à configurer
; Si Adapter NTN_RegBase = Software\Microsoft\WindowsNT\NetCards\8
; Si Driver NTN_RegBase = Software\Interphase\SYNxxx\CurrentVersion
;
ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
set from = end
set to = end
goto NonFatalInfo
endif
;
; Installation (par défaut)
;
else
set DetectionCardDriver = $(TRUE)
set StartLabel = installadapter
set OEM_ABANDON_OPTIONS = {}
set OEM_ABANDON_SOFTWARE = FALSE
set OEM_ABANDON_ON = TRUE
; Force Copie des fichiers pour résolution bug lors install réseau
set DoCopy = YES
endif
;-----------------------------------------------
;
; DETECTION du driver SYNSYS
;
; Si Driver de carte non installé installation
; ou configuration de SYNxxx impossible
;
; Installation automatique driver si
; [FileConstants] InstallSynSYS = 1
;
;-----------------------------------------------
DetectSynSYS = +
ifstr(i) $(DetectionCardDriver) != $(TRUE)
goto $(StartLabel)
endif
set InstallLink = $(FALSE)
; Détection de la présence du WanSetup
set WanSetupPath = $(!STF_WINDOWSSYSPATH)
shell "" FillPathEnd $(WanSetupPath)
set WanSetupPath = $($R0)$(WanSetup)
LibraryProcedure ExitCode, $(!LIBHANDLE), CheckFileExistance $(WanSetupPath)
ifstr(i) $(ExitCode) != YES
set InstallLink = $(TRUE)
endif
; Détection de la présence de SynSYS dans la Registry
OpenRegKey $(!REG_H_LOCAL) "" $(CardDriverKeyName) $(MAXIMUM_ALLOWED) KeyCardDriver
ifstr $(KeyCardDriver) == $(KeyNull)
set InstallLink = $(TRUE)
else-ifstr $(InstallLink) == $(TRUE)
; La clé existe mais le wansetup n'existe plus
; supression de la clé
CloseRegKey $(KeyCardDriver)
OpenRegKey $(!REG_H_LOCAL) "" $(IphKeyName) $(MAXIMUM_ALLOWED) KeyCardDriver
DeleteRegTree $(KeyCardDriver) $(CardDriverName)
CloseRegKey $(KeyCardDriver)
endif
ifstr $(InstallLink) == $(TRUE)
;
; Désinstallation possible sans Link Driver
; Chargement de DLL impossible car les Autres DLL sont absentes
;
ifstr(i) $(!NTN_InstallMode) == deinstall
set CardDriverPath = ""
goto $(StartLabel)
endif
;
; Installation intégrée du Link Driver
;
ifstr $(InstallSynSYS) == $(TRUE)
shell "" InstallLinkDriver $(!USER_LANGUAGE) $(SrcDir) "INSTALL"
ifstr $($RO) == STATUS_SHELL_ERROR
goto ShellCodeError
else-ifstr $($R0) == STATUS_SUCCESSFUL
set SrcDir = $($R1)
goto DetectSynSYS
else-ifstr $($R0) == STATUS_USERCANCEL
set CommonStatus = $($R0)
goto successful
else
set CommonStatus = $($R0)
set from = end
set to = end
goto fatal
endif
else
set Error = $(NoCardDriver);
set from = end
set to = end
goto fatal
endif
else
;
; Lecture du répertoire d'installation de SynSYS
; Utilisé pour désinstallation
;
GetRegValue $(KeyCardDriver),"PathName", CardDriverPathInfo
ifint $(RegLastError) != $(!REG_ERROR_SUCCESS)
set Error = $(CardDriverKo);
set from = end
set to = end
goto fatal
endif
; Extraction de la valeur à partir de la liste
set CardDriverPath = *($(CardDriverPathInfo),4)
CloseRegKey $(KeyCardDriver)
endif
;-----------------------------------------------
;
; CHARGEMENT DLL et Vérification Version
;
; (Si Mode Update, on fonctionne déjà avec le nouveau .INF)
; si Erreur Message puis Sortie
;
;-----------------------------------------------
LoadDll = +
set LibPath = $(!STF_WINDOWSSYSPATH)
shell "" FillPathEnd $(LibPath)
set LibPath = $($R0)$(DllName)
;
; Traitement particulier en phase d'installation
;
ifstr(i) $(StartLabel) == installadapter
;
; Recherche si la DLL existe déjà sur le disque et si Version Ok
;
LibraryProcedure ExitCode, $(!LIBHANDLE), CheckFileExistance $(LibPath)
ifstr(i) $(ExitCode) == YES
;
; Dll trouvée , analyse version
;
LoadLibrary "x" $(LibPath) hOemSwaDll
LibraryProcedure DllCurVersion $(hOemSwaDll) GetDllVersion
; Extraction version majeure
Split-String $(DllCurVersion) "." DllMajCurVersion
set DllMajCurVersion = *($(DllMajCurVersion),1)
freeLibrary $(hOemSwaDll)
;
; Si mauvaise version, on charge la DLL directement sur la disquette
;
ifstr(i) $(DllMajCurVersion) != $(DllMajVersion)
set ExitCode = NO
endif
endif
;
; Dll absente du disque il s'agit d'une première installation
; ou mauvaise version
; Copie des fichiers
;
ifstr(i) $(ExitCode) != YES
;
; Saisie du répertoire source si pas déjà fait pour OEMSETUP.INF
;
ifstr(i) $(!STF_SRCDIR_OVERRIDE) != ""
set SrcDir = $(!STF_SRCDIR_OVERRIDE)
else
Shell $(OtherInf), DoDiskette, $(!STF_LANGUAGE) "" $(SrcDir)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
else-ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
else-ifstr(i) $($R0) == STATUS_USERCANCEL
goto successful
endif
set SrcDir = $($R1)
set !STF_SRCDIR_OVERRIDE = $($R1)
endif
install "PREInstall-Option"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
endif
endif
endif
;
; Traitement général du chargement de la DLL
;
LoadLibrary #("Source Media Descriptions", 1, 1) $(LibPath) hOemSwaDll
LibraryProcedure DllCurVersion $(hOemSwaDll) GetDllVersion
; Extraction version majeure
Split-String $(DllCurVersion) "." DllMajCurVersion
set DllMajCurVersion = *($(DllMajCurVersion),1)
;
; Si mauvaise version, Abandon
;
ifstr(i) $(DllMajCurVersion) != $(DllMajVersion)
set Error = $(DllVersionError);
set from = end
set to = end
goto fatal
endif
goto $(StartLabel)
;-----------------------------------------------------------------------------
;
; INSTALLATION
;
; Détection de la présence de SYNxxx
; Si absent alors 1ère installation - > OldVersionExisted = FALSE
; Si présent
; si ajout logicel -> Impossible Message puis Fin
; si ajout adapter -> Test si il reste au moins une carte sans adapter
; si Oui -> OldVersionExisted = TRUE
; si Non -> Message puis Fin
;
;-----------------------------------------------------------------------------
installadapter = +
;
; Détection si ajout d'adaptateur autorisé
detect InitOemSwaDll
;
; Recherche présence clef logicel
;
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
ifstr $(KeyProduct) != $(KeyNull)
;
; Il Existe déjà
;
CloseRegKey $(KeyProduct)
;
; Installation d'un logiciel (Normalement ce cas est impossible)
; On installe toujours un Adapter
;
ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
;
; Refus d'installation en double
;
Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
$(ProductVersion)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
goto end
;
; Ajout d'un Adapter
; Autorisé seulement si il reste au moins une ligne sur une carte non utilisée
;
else-ifint $(AddAdapterOk) != $(TRUE)
set Error = $(NoCard);
set from = end
set to = end
goto Fatal
else
set OldVersionExisted = $(TRUE)
endif
;
; Ajout d'un Adapter
; Autorisé seulement si il reste au moins une ligne sur une carte non utilisée
;
else-ifint $(AddAdapterOk) != $(TRUE)
set Error = $(NoCard);
set from = end
set to = end
goto Fatal
endif
goto AdapterSetup
;-----------------------------------------------
;
; Configuration d'un Adaptateur
;
; Calcul du numéro d'adapter avant configuration
;
;-----------------------------------------------
ConfigureAdapter = +
;
; Ouverture de la Clef ...\NetworkCards\(n)
;
ifstr $(KeyProduct) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
ifstr $(KeyProduct) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
goto FatalRegistry
endif
endif
;
; recherche du service associé
;
Shell $(UtilityInf) FindService, $(KeyProduct)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R0) != NO_ERROR
goto FatalRegistry
endif
;
; Au Retour de FindService
;
; $R1 -> Key Handle du service ...\SWA?Drv(n)
; $R2 -> Key Handle des paramètres du service ...\SWA?Drv(n)\Parameters
;
CloseRegKey $($R1) ; Clef sur service non utilisée
set KeyParameters = $($R2)
;
; Calcule numéro de l'adaptateur à partir de la clef ...\NetworkCards\(n)
;
Split-String $(!NTN_RegBase) "\" BaseList
QueryListSize ListSize $(BaseList)
set AdapterNumber = *($(BaseList),$(ListSize))
ifstr $(KeyParameters) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
goto FatalRegistry
endif
CloseRegKey $(KeyParameters)
set OldVersionExisted = $(TRUE)
goto updateparameters
;-----------------------------------------------
;
; CREATION ADAPTER
;
; Installation et création du SoftWare si n'existe pas déjà
; Déclaration d'une carte réseau supplémentaire
;
;-----------------------------------------------
AdapterSetup = +
StartWait
;
; Ajout Logiciel si n'existe pas déjà
;
ifint $(OldVersionExisted) == $(FALSE)
ifstr(i) $(!NTN_InstallMode) == "install"
;
; Copie des fichiers si Logiciel absent et si mode Install
;
ifstr(i) $(DoCopy) == "YES"
;
; Saisie du répertoire source si pas déjà fait pour OEMSETUP.INF
;
ifstr(i) $(!STF_SRCDIR_OVERRIDE) != ""
set SrcDir = $(!STF_SRCDIR_OVERRIDE)
else
Shell $(OtherInf), DoDiskette, $(!STF_LANGUAGE) "" $(SrcDir)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
else-ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
else-ifstr(i) $($R0) == STATUS_USERCANCEL
goto successful
endif
set SrcDir = $($R1)
set !STF_SRCDIR_OVERRIDE = $($R1)
endif
endif
;
; Copie des fichiers
;
Install "Install-Option"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto Fatal
endif
;
; Suppression du fichier OEMSETUP si générique
;
ifstr(i) $(STF_CONTEXTINFNAME) != $(!STF_WINDOWSSYSPATH)\$(!UG_Filename)
LibraryProcedure ExitCode, $(!LIBHANDLE), CheckFileExistance $(!STF_WINDOWSSYSPATH)\$(!UG_Filename)
ifstr(i) $(ExitCode) == YES
LibraryProcedure DelStatus $(!LIBHANDLE), DelFile $(STF_CONTEXTINFNAME)
ifstr(i) $(DelStatus) == "SUCCESS"
set STF_CONTEXTINFNAME = $(!STF_WINDOWSSYSPATH)\$(!UG_Filename)
endif
endif
endif
endif
;
; Déclaration du logiciel dans la clef SOFTWARE et du Service Associé
; (pas de dépendences ici car réservées au NCPA pour dépendences dynamiques)
;
;
Shell $(UtilityInf), AddSoftwareComponent, +
$(Manufacturer), +
$(ProductSoftwareName), +
$(ProductSoftwareName), +
$(ProductSoftwareTitle),+
$(STF_CONTEXTINFNAME), +
$(ProductSoftwareImagePath), +
"kernel", + ; Lancement en mode manuel
"NDIS", +
{},+
"",+
$(NetEventDLL)
set OEM_ABANDON_SOFTWARE = TRUE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
;
; Au retour de AddSoftwareComponent
;
; $R1 -> product version key handle
; $R2 -> NetRules subkey handle
; $R3 -> new Services key handle
; $R4 -> Parameters key
; $R5 -> Linkage Key
;
set RegistryErrorIndex = $($R0)
set KeyProduct = $($R1)
set SoftNetRulesKey = $($R2)
set LinkageKey = $($R5)
CloseRegKey $($R3)
CloseRegKey $($R4)
ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
CloseRegKey $(LinkageKey)
goto FatalRegistry
endif
;
; Ajout des dépendences statiques dans clef Linkage
;
set NewValueList = {{OtherDependencies,$(NoTitle),$(!REG_VT_MULTI_SZ),{$(SynOSDriverName)}}}
Shell $(UtilityInf), AddValueList, $(LinkageKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(LinkageKey)
set RegistryErrorIndex = $($R0)
ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
goto fatalregistry
endif
;
; Création des Valeurs de la clef Software CurrentVersion
;
set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
{MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
{MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
{Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)},+
{PathName,$(NoTitle),$(!REG_VT_SZ),$(ProductPath)}}
Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
goto FatalRegistry
endif
;
; Création des Valeurs de la clef CurrentVersion\NetRules
;
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
{bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(Bindable$(Option)Txt)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
goto FatalRegistry
endif
;
; Le SoftWare Existe
;
endif
;
; Création de carte réseau
;
; SOFTWARE\Microsoft\WindowsNT\CurrentVersion\NetworkCards\(n)
; et du service associé constitué par le nom du SoftWare + Index de carte réseau
; ex : IPHISDN6
;
;
; Suppression du fichier OEMSETUP si générique
;
ifstr(i) $(STF_CONTEXTINFNAME) != $(!STF_WINDOWSSYSPATH)\$(!UG_Filename)
LibraryProcedure ExitCode, $(!LIBHANDLE), CheckFileExistance $(!STF_WINDOWSSYSPATH)\$(!UG_Filename)
ifstr(i) $(ExitCode) == YES
LibraryProcedure DelStatus $(!LIBHANDLE), DelFile $(STF_CONTEXTINFNAME)
ifstr(i) $(DelStatus) == "SUCCESS"
Set STF_CONTEXTINFNAME = $(!STF_WINDOWSSYSPATH)\$(!UG_Filename)
endif
endif
endif
Shell $(UtilityInf), AddHardwareComponent,+
$(ProductHardwareName),+
$(STF_CONTEXTINFNAME),+
$(ProductKeyName)
ifint $($R4) != -1
set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
endif
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
goto FatalRegistry
endif
;
; Au Retour de AddHardwareComponent
;
; $R1 -> key Handle pour ...\NetworkCards\(n)
; $R2 -> key Handle pour ...\NetworkCards\(n)\NetRules
; $R3 -> key Handle pour <service>\Parameters
; $R4 -> Numéro d'adapter
; $R5 -> Nom du service = Nom Adapter + Numéro Adapter
;
set KeyAdapter = $($R1)
set KeyParameters = $($R3)
set KeyAdapterRules = $($R2)
set AdapterNumber = $($R4)
CloseRegKey $(KeyParameters)
;
; Création des valeurs de la clef ...\NetworkCards\(n)
;
set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareDescription)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{OperationsSupport,$(NoTitle),$(!REG_VT_DWORD),$(ProductOpSupport)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $(KeyAdapter), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(KeyAdapter)
;
; Création des valeurs de la clef ...\NetworkCards\(n)\NetRules
;
set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardware$(Option)Type)},+
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardware$(Option)Class)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
CloseRegKey $(KeyParameters)
CloseRegKey $(KeyAdapterRules)
goto FatalRegistry
endif
CloseRegKey $(KeyAdapterRules)
;-----------------------------------------------
;
; MISE A JOUR OU CREATION DES PARAMETRES
;
; d'un adaptateur par procédure externe dans DLL
; correspondant à cet adaptateur
;
; ENTREE : $(AdapterNumber) Numéro d'adaptateur à paramétrer
;
;-----------------------------------------------
updateparameters = +
EndWait
;
; Configuration dans la DLL
; - Lecture paramètres
; - Affichage / Modification
; - Ecriture paramètres
;
set FLibraryErrCtl = "1"
set ConfigResult = ""
LibraryProcedure ConfigResult $(hOemSwaDll) ConfigureAdpt +
$(!USER_LANGUAGE) +
$(AdapterNumber) +
$(TapiMediaType) +
$(!NTN_InstallMode)
ifstr(i) $(ConfigResult) != "NO_ERROR"
ifstr(i) $(ConfigResult) == "CANCEL"
set CommonStatus = STATUS_USERCANCEL
goto Successful
else-ifstr(i) $(ConfigResult) == "NO_RAS"
goto Successful
else
set Error = $(ConfigResult)
set from = end
set to = end
goto Fatal
endif
endif
;-----------------------------------------------
;
; RAS CONFIGURATION OU INSTALLATION
;
; Détection si RAS est installé, si-non -> Installation
; Si RAS est installé alors configuration.
;
;-----------------------------------------------
;
; Détection installation de RAS avec fichier "oemnsvra.inf"
;
Read-Syms InvokeRasDlg$(!USER_LANGUAGE)
Shell "oemnsvra.inf" CheckRasInstalled
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Shell "subroutn.inf" SetupMessage, $(!STF_LANGUAGE), +
"STATUS", $(InvokeRasError)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
goto Successful
endif
set RasInstalled = $($R0)
;
; Si RAS non installé affiche message INSTALLATION RAS
;
ifstr(i) $(RasInstalled) == FALSE
Shell "subroutn.inf" SetupMessage, $(!STF_LANGUAGE), "STATUS", +
$(InvokeRasSetupMsg)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto Successful
endif
;
; Si RAS installé affiche message CONFIGURATION RAS
;
else
Shell "subroutn.inf" SetupMessage, $(!STF_LANGUAGE), "STATUS", +
$(InvokeRasConfigMsg)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto Successful
endif
endif
;
; Positionne les flags d'installation RAS
;
ifstr(i) $(!STF_IDW) == TRUE
set AddCopy = NO
set DoCopy = NO
set DoConfig = NO
else
set AddCopy = YES
set DoCopy = YES
set DoConfig = YES
endif
;
; Choix Mode INSTALL ou CONFIGURE de RAS
;
set SaveNTN_InstallMode = $(!NTN_InstallMode)
ifstr(i) $(RasInstalled) == TRUE
set !NTN_InstallMode = configure
else
set !NTN_InstallMode = install
endif
;
; Mise à jour des répertoires par défaut pour l'installation
;
set SaveSTF_SRCDIR_OVERRIDE = $(!STF_SRCDIR_OVERRIDE)
set !STF_SRCDIR_OVERRIDE = ""
set RasDir = "A:\"$(!STF_PLATFORM)
;
; Appel du programme d'installation/configuration de RAS
;
Shell "oemnsvra.inf" InstallOption $(!STF_LANGUAGE) "RAS" $(RasDir) $(AddCopy) $(DoCopy) $(DoConfig)
;
; Restore les flags généraux.
;
; Mémorise Code de sortie de RAS et Répertoire d'install
set RasResult = $($R0)
set RasDir = $(!STF_SRCDIR_OVERRIDE)
set !NTN_InstallMode = $(SaveNTN_InstallMode)
set !STF_SRCDIR_OVERRIDE = $(SaveSTF_SRCDIR_OVERRIDE)
;
; Analyse des erreurs RAS.
;
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Shell "subroutn.inf" SetupMessage, $(!STF_LANGUAGE), "STATUS", +
$(InvokeRasError)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
goto Successful
endif
;
; Install de RAS Annulée -> Annule install driver
;
ifstr(i) $(RasInstalled) == FALSE
ifstr(i) $(RasResult) == STATUS_USERCANCEL
set CommonStatus = $(RasResult)
goto fatal
endif
endif
;
; Si RAS annonce pas de changement et Mode Install
; alors message d'avertissement.
;
ifstr(i) $(!NTN_InstallMode) == install
ifstr(i) $(RasResult) == STATUS_NO_EFFECT
Shell "subroutn.inf" SetupMessage, $(!STF_LANGUAGE), "STATUS", +
$(InvokeRasAgainMsg)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto Successful
endif
endif
ifstr(i) $(RasResult) == STATUS_SUCCESSFUL
;
; Détection si un autre adaptateur réseau est installé, si non
; ajout de l'adaptateur LOOPBACK
;
set fNetcardInstalled = FALSE;
Shell "" IsNetcardInstalled
ifstr(i) $($R0) == STATUS_SUCCESSFUL
set fNetcardInstalled = $($R1)
endif
ifstr(i) $(fNetcardInstalled) == FALSE
Shell "subroutn.inf" SetupMessage, $(!STF_LANGUAGE), "WARNING", $(NeedLoopback)
ifstr(i) $($R1) == "OK"
set AddCopy = YES
set DoCopy = YES
set DoConfig = YES
set SaveNTN_InstallMode = $(!NTN_InstallMode)
set SaveSTF_SRCDIR_OVERRIDE = $(!STF_SRCDIR_OVERRIDE)
set !NTN_InstallMode = install
set !STF_SRCDIR_OVERRIDE = $(RasDir)
ifstr(i) $(RasDir) == ""
set RasDir = "A:\"$(!STF_PLATFORM)
endif
Shell "oemnadlb.inf" InstallOption $(!STF_LANGUAGE) "LOOP" $(RasDir) $(AddCopy) $(DoCopy) $(DoConfig)
set !NTN_InstallMode = $(SaveNTN_InstallMode)
set !STF_SRCDIR_OVERRIDE = $(SaveSTF_SRCDIR_OVERRIDE)
endif
endif
; Intall Virtual Motion
shell "" InstallVMotion $(!USER_LANGUAGE) $(SrcDir)
endif
endif
; Restaure Code de sortie de RAS
set CommonStatus = $(RasResult)
goto Successful
;-----------------------------------------------
;
; Binding section
;
; Ce cas de figure n'existe pas, le fichier .INF d'un
; adapter n'est pas appelé pendant une opération de Bind.
;
;-----------------------------------------------
BindingAdapter =+
set Error = "Binding: Sorry, not yet implemented."
goto Fatal
;-----------------------------------------------
;
; SUPPRESSION d'un adapter
;
; et si plus d'adapter suppression du software
;
;-----------------------------------------------
RemoveAdapter = +
ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
;
; Suppression de la définition du logiciel ds les Registry.
; Normalement cette fonction est impossible car on refuse
; de supprimer le software tant qu'il existe au moins 1 Adapter.
; Le software est supprimé automatiquement par RemoveHardwareComponent
; sur le dernier adaptateur.
;
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto FatalRegistry
endif
else
;
; Suppression des Ports RAS Si la DLL a pu être chargé
; (Si SYNSYS déjà désinstallé chargement DLL impossible)
ifstr $(hOemSwaDll) != ""
;
; Calcule numéro de l'adaptateur à partir de la clef ...\NetworkCards\(n)
Split-String $(!NTN_RegBase) "\" BaseList
QueryListSize ListSize $(BaseList)
set AdapterNumber = *($(BaseList),$(ListSize))
LibraryProcedure ConfigResult $(hOemSwaDll) RemoveAdpt $(AdapterNumber) $(TapiMediaType)
freeLibrary $(hOemSwaDll)
endif
;
; Suppression Hardware (Adapter) et si plus d'adapter suppression Software
;
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $(!NTN_RegBase)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto FatalRegistry
endif
;
; Teste si le Software a été supprimé
;
set KeyProduct = ""
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
ifstr $(KeyProduct) == $(KeyNull)
;
; Suppression fichiers
;
install "Remove-Option"
;
; Suppression dans Event log clef software
; (Oubliée par RemoveSoftwareComponent !)
;
set KeyEvent = ""
OpenRegKey $(!REG_H_LOCAL) "" $(EventKeyName) $(MAXIMUM_ALLOWED) KeyEvent
ifstr $(KeyEvent) != $(KeyNull)
DeleteRegTree $(KeyEvent) $(ProductSoftwareName)
CloseRegKey $(KeyEvent)
endif
;
; Suppression de synsys si existe et si installé avec IPHWAN
; et si il n'existe plus d'adaptateur d'aucun type (DelFiles=TRUE)
;
ifstr $(InstallSynSYS) == $(TRUE)
ifstr $(DelFiles) == $(TRUE)
ifstr $(CardDriverPath) != ""
shell "" InstallLinkDriver $(!USER_LANGUAGE) $(CardDriverPath) "REMOVE"
ifstr $($RO) == STATUS_SHELL_ERROR
goto ShellCodeError
endif
endif
endif
endif
else
CloseRegKey $(KeyProduct)
endif
endif
goto end
;-----------------------------------------------
;
; MISE A JOUR Software
;
; La mise à jour d'un adapateur est interdite
; (Message opérateur pour lui demander de faire un Update Software).
;
;
;-----------------------------------------------
UpgradeSoftware = +
;
; Détermine si Update Software ou HardWare
;
ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
;
; Mise à jour Software
;
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
ifstr $(KeyProduct) != $(KeyNull)
GetRegValue $(KeyProduct),"MajorVersion", VersionInfo
set Version = *($(VersionInfo), 4)
;
; Recherche du nom du fichier .INF pour remplacement
;
Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set !UG_Filename = $($R0)
;
; Copie des fichiers uniquement si ils sont différents
; (Comparaison des dates)
;
ifstr(i) $(!UG_Filename) != ""
install "Install-Update"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
goto Fatal
endif
endif
;
; Mise à jour numéro de version
;
SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)}
SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)}
;
; Rien n'est prévus en mode Update !
;
ifint $(Version) != $(ProductVersion)
;
; Mise à jour éventuelle sur changement de version
;
endif
CloseRegKey $(KeyProduct)
shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "STATUS" $(UpdateOk)
else
;
; Erreur ouverture clef Software ?
;
goto FatalRegistry
endif
else
;
; Pas de mise à jour d'un adaptateur
;
shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "STATUS" $(NoUpdateAdpt)
endif
goto end
;-----------------------------------------------
;
; Escape hatches
;
;-----------------------------------------------
Successful = +
goto end
Abandon = +
ForListDo $(OEM_ABANDON_OPTIONS)
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $($)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto FatalRegistry
endif
EndForListDo
ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), FALSE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto FatalRegistry
endif
endif
goto end
WarningMsg = +
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(to)
else-ifstr(i) $($R1) == "CANCEL"
goto $(from)
endif
goto end
NonFatalInfo = +
set Severity = STATUS
set CommonStatus = STATUS_USERCANCEL
ifstr(i) $(Error) == ""
set Severity = NONFATAL
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(from)
endif
goto end
FatalRegistry = +
Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto Fatal
FatalDetect = +
Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto Fatal
Fatal = +
ifstr(i) $(Error) == ""
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
goto SetFailed
ShellCodeError = +
set DlgType = "MessageBox"
set STF_MB_TITLE = $(ShellCodeErrorTitle)
set STF_MB_TEXT = $(ShellCodeErrorText)
set STF_MB_TYPE = 1
set STF_MB_ICON = 3
set STF_MB_DEF = 1
UI Start "Error Message"
goto SetFailed
SetFailed = +
set CommonStatus = STATUS_FAILED
ifstr(i) $(OEM_ABANDON_ON) == TRUE
set OEM_ABANDON_ON = FALSE
goto Abandon
endif
goto end
end = +
Return $(CommonStatus)
;-----------------------------------------------
;
; PRE INSTALL
;
; Copie des fichiers necessaires à l'exécution
; de SETUP.INF
;
;-----------------------------------------------
[PREInstall-Option]
set STF_VITAL = "1"
set STF_DECOMPRESS = ""
set STF_OVERWRITE = "ALWAYS"
ifstr(i) $(AddCopy) == "YES"
;
; Création de la liste des fichiers à copier
;
; DLL d'installation
AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
endif
ifstr(i) $(DoCopy) == "YES"
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
endif
Exit
;-----------------------------------------------
;
; INSTALL
;
; Copie des fichiers en mode installation
;
;-----------------------------------------------
[Install-Option]
set STF_VITAL = "1"
set STF_DECOMPRESS = ""
set STF_OVERWRITE = "ALWAYS"
ifstr(i) $(AddCopy) == "YES"
;
; Création de la liste des fichiers à copier
; DLL d'installation
AddSectionKeyFileToCopyList Files-Inf OemDll $(SrcDir) $(!STF_WINDOWSSYSPATH)
; Help
AddSectionFilesToCopyList Files-Help $(SrcDir) $(!STF_WINDOWSPATH)\Help
;
; Fichiers Driver
AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(ProductPath)
endif
ifstr(i) $(DoCopy) == "YES"
CreateDir $(ProductPath)
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
endif
exit
;-----------------------------------------------
;
; REMOVE
;
; Suppression des fichiers
;
;-----------------------------------------------
[Remove-Option]
set RemoveList = {}
set DelOnRebootList = {}
set DelFiles = $(TRUE)
set OptionList = ^(Options, 1)
set RemoveList = >($(RemoveList),#(Files-Remove,$(Option),1))
;
; On ne supprime les autres fichiers que si il n'y a plus d'adaptateurs
; d'aucune des options
;
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_SoftwareBase)"\"$(Manufacturer) $(MAXIMUM_ALLOWED) KeyManufac
ifstr $(KeyManufac) != $(KeyNull)
ForListDo $(OptionList)
OpenRegKey $(KeyManufac) "" $($) $(MAXIMUM_ALLOWED) KeyOption
ifstr $(KeyOption) != $(KeyNull)
set DelFiles = $(FALSE)
CloseRegKey $(KeyOption)
endif
EndForListDo
CloseRegKey $(KeyManufac)
endif
ifstr $(DelFiles) == $(TRUE)
set RemoveList = >($(RemoveList),#(Files-Remove,OEMDLL ,1))
set RemoveList = >($(RemoveList),#(Files-Remove,HELP ,1))
set RemoveList = >($(RemoveList),#(Files-Remove,CNT ,1))
set RemoveList = >($(RemoveList),#(Files-Remove,SIDDV ,1))
set RemoveList = >($(RemoveList),#(Files-Remove,SIDSV ,1))
set RemoveList = >($(RemoveList),#(Files-Remove,SIDLG ,1))
endif
;
; Suppression des fichiers standard
;
set FLibraryErrCtl = 1
ForListDo $(RemoveList)
; Si le fichier existe
LibraryProcedure ExitCode, $(!LIBHANDLE),CheckFileExistance $($)
ifstr(i) $(ExitCode) == YES
LibraryProcedure DelStatus $(!LIBHANDLE), DelFile $($)
ifstr(i) $(DelStatus) != "SUCCESS"
set DelOnRebootList = >($(DelOnRebootList),$($))
else
;
; Si le fichier existe toujours, il était en cours d'utilisation
;
LibraryProcedure ExitCode, $(!LIBHANDLE),CheckFileExistance $($)
ifstr(i) $(ExitCode) == YES
set DelOnRebootList = >($(DelOnRebootList),$($))
endif
endif
endif
EndForListDo
;
; Suppression des fichiers en cours d'utilisation
; par ajout dans la liste de suppression du fichier renommé en .old
;
ForListDo $(DelOnRebootList)
Split-String $($) "." FilePath
QueryListSize PathLen $(FilePath)
set FileToDelete = ""
ForListDo $(FilePath)
ifint $(#) < $(PathLen)
set FileToDelete = $(FileToDelete)$($)
else
set FileToDelete = $(FileToDelete)"old"
endif
EndForListDo
; Si le fichier renomé existe déjà supprime avant rename
LibraryProcedure ExitCode, $(!LIBHANDLE),CheckFileExistance $(FileToDelete)
ifstr(i) $(ExitCode) == YES
LibraryProcedure DelStatus $(!LIBHANDLE), DelFile $(FileToDelete)
endif
LibraryProcedure ExitCode, $(!LIBHANDLE),RenFile $($),$(FileToDelete)
AddFileToDeleteList $(FileToDelete)
EndForListDo
set FLibraryErrCtl = 0
exit
;-----------------------------------------------
;
; UPDATE
;
; Copie des fichiers en mode mise à jour
;
;-----------------------------------------------
[Install-Update]
set STF_VITAL = ""
set STF_OVERWRITE = "VERIFYSOURCEOLDER"
;set STF_VERSION = "YES"
AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(ProductPath)
AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-Help $(SrcDir) $(!STF_WINDOWSPATH)\Help
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
exit
;***********************************************************************
;
;***********************************************************************
[Source Media Descriptions]
1 = "Interphase 553X Ras Support" , TAGFILE = IPHISDN.SY_
;***********************************************************************
;
;***********************************************************************
[ProductType]
STF_PRODUCT = Winnt
STF_PLATFORM = I386
[Files-Inf]
Setnt = 1, oemsetnt.inf, SIZE=45000 ,RENAME=$(!UG_Filename)
OemDll = 1, cndiswan.dl_, SIZE=150000,DECOMPRESS,RENAME=cndiswan.dll
[Files-Help]
Help = 1, cndiswan.HL_, SIZE=15000 ,DECOMPRESS,RENAME=cndiswan.HLP
Cnt = 1, cndiswan.CN_, SIZE=1000 ,DECOMPRESS,RENAME=cndiswan.CNT
[Files-IPHISDN]
1, IPHISDN.SY_, SIZE=60000, DECOMPRESS,RENAME=IPHISDN.sys
1, IPHSIDDV.SY_,SIZE=23000, DECOMPRESS,RENAME=IPHSIDDV.SYS
1, IPHSIDSV.EX_,SIZE=60000, DECOMPRESS,RENAME=IPHSIDSV.EXE
1, IPHSIDLG.DL_,SIZE=33000, DECOMPRESS,RENAME=IPHSIDLG.DLL
[Files-IPHDM]
1, IPHDM.SY_ ,SIZE=60000, DECOMPRESS,RENAME=IPHDM.sys
1, IPHSIDDV.SY_,SIZE=23000, DECOMPRESS,RENAME=IPHSIDDV.SYS
1, IPHSIDSV.EX_,SIZE=60000, DECOMPRESS,RENAME=IPHSIDSV.EXE
1, IPHSIDLG.DL_,SIZE=33000, DECOMPRESS,RENAME=IPHSIDLG.DLL
[Files-Remove]
IPHISDN = $(DriverPath)\IPHISDN.sys
IPHDM = $(DriverPath)\IPHDM.sys
OEMDLL = $(!STF_WINDOWSSYSPATH)\cndiswan.dll
HELP = $(!STF_WINDOWSPATH)\Help\cndiswan.Hlp
CNT = $(!STF_WINDOWSPATH)\Help\cndiswan.Cnt
SIDDV = $(DriverPath)\IPHSIDDV.SYS
SIDSV = $(DriverPath)\IPHSIDSV.EXE
SIDLG = $(DriverPath)\IPHSIDLG.DLL
;***********************************************************************
;
;***********************************************************************
[LanguagesSupported]
ENG
FRA
;***********************************************************************
;
;***********************************************************************
[OptionsTextENG]
IPHISDN = "Interphase 553X ISDN RAS Support"
IPHDM = "Interphase 5536 Digital Modem RAS Support"
[OptionsTextFRA]
IPHISDN = "Interphase 553X RNIS Support RAS"
IPHDM = "Interphase 5536 Digital Modem Support RAS"
;-----------------------------------------------
;
; Messages qui dépendent de la langue utilisée
;
; Version Anglaise
;-----------------------------------------------
[FileConstantsENG]
ProCaption = "Windows NT Setup"
ProCancel = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed. "+
"Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
FileNotFound = "The setup software cannot found:"
GetAnotherPath = "Please type another path."
FunctionTitle = "Interphase "$(TapiMediaName)" RAS Setup"
ProductHardwareDescription = "Interphase "$(TapiMediaName)" WAN adapters "+
"Remote Access Service (RAS) support."
ProductHardwareTitle = "Interphase "$(TapiMediaName)" RAS support"
ProductSoftwareDescription = "Interphase "$(TapiMediaName)" RAS Driver"
ProductSoftwareTitle = "Interphase "$(TapiMediaName)" RAS support"
ShellCodeErrorTitle = "Error: "$(FunctionTitle)
ShellCodeErrorText = "Shell Code Error."
InstallCardDriver = "Interphase 553X RAS Support"$(LF)+
"needs previous installation of"$(LF)+
"Interphase 553X Base Driver."$(LF)$(LF)+
"Please confirm this driver installation?"
NoCardDriver = "Interphase 553X Base Driver "$(LF)+
"software not found."$(LF)+
"Please install this product before."
CardDriverKo = "Interphase 553X Base Driver"$(LF)+
"Unable to find configuration of this product."
NoCard = "No Interphase "$(TapiMediaName)" card installed or configured,"$(LF)+
"cannot create a network adapter."$(LF)$(LF)+
"Please, add a card with the control panel WAN Setup icon"$(LF)+
"and try again."
NoAdapter = "No Interphase card driver installed or,"$(LF)+
"all adapters supported by the RAS Support driver are already created."$(LF)+
"Cannot create another adapter."
NoUpdateAdpt = "Unable to update adapter."$(LF)+
"Please update network Software instead."
UpdateOk = "Interphase RAS Support"$(LF)+
"Update is complete."
DllVersionError = "Incorrect version of : "$(DllName)
DllRunningError = "Unable to add,remove or configure RAS Support adapter,"+
"configuration software already running."
;-----------------------------------------------
;
; Messages qui dépendent de la langue utilisée
;
; Version Française
;-----------------------------------------------
[FileConstantsFRA]
ProCaption = "Windows NT Configuration"
ProCancel = "Annuler"
ProCancelMsg = "L'adaptateur réseau Windows NT n'est pas installé correctement."+
"Etes vous sur de vouloir annuler la copie des fichiers?"
ProCancelCap = "Message Configuration Réseau"
ProText1 = "Copie:"
ProText2 = "Vers:"
FileNotFound = "Le programme d'installation ne peut trouver :"
GetAnotherPath = "Veuillez saisir un nouveau chemin."
FunctionTitle = "Configuration du support RAS Interphase "$(TapiMediaName)
ProductHardwareDescription = "Support du service d'accès distant (RAS) pour "+
"adaptateurs Interphase "$(TapiMediaName)"."
ProductHardwareTitle = "Support RAS Interphase "$(TapiMediaName)
ProductSoftwareDescription = "Driver RAS Interphase "$(TapiMediaName)
ProductSoftwareTitle = "Support RAS Interphase "$(TapiMediaName)
ShellCodeErrorTitle = "Erreur: "$(FunctionTitle)
ShellCodeErrorText = "Code Erreur Shell."
InstallCardDriver = "Le Support RAS Interphase 553X"$(LF)+
"nécessite l'installation préalable du"$(LF)+
"Driver de Base 553X Interphase"$(LF)$(LF)+
"Confirmez vous l'installation de ce driver ?"
NoCardDriver = "Driver de Base 553X Interphase"$(LF)+
"Logiciel non installé."$(LF)+
"Veuillez installer ce logiciel au préalable."
CardDriverKo = "Driver de Base 553X Interphase"$(LF)+
"La configuration de ce produit est introuvable!"
NoCard = "Aucune carte "$(TapiMediaName)" Interphase n'est installée ou configurée."$(LF)+
"La création d'un adaptateur réseau est impossible."$(LF)$(LF)+
"Veuillez ajouter une carte avec l'icone WAN Configuration"$(LF)+
"du panneau de configuration puis essayez à nouveau."
NoAdapter = "Aucune carte Interphase n'est installé,"$(LF)+
"ou le nombre maximum d'adaptateurs du driver de support RAS est atteint."$(LF)+
"L'ajout d'un nouvel adaptateur est impossible."
NoUpdateAdpt = "Mise à jour d'un adaptateur impossible."$(LF)+
"Seul le logiciel réseau peut être mis à jour."
UpdateOk = "Support RAS Interphase"$(LF)+
"Mise à jour terminée avec succés."
DllVersionError = "Mauvaise version de : "$(DllName)
DllRunningError = "Installation,configuration ou suppression adaptateur de support"+
" RAS non autorisée,programme de configuration déjà actif."
;-----------------------------------------------------
;
; Messages qui dépendent de la langue et de l'option
;
;-----------------------------------------------------
[FileConstantsIPHISDNENG]
TapiMediaName = "553X ISDN"
[FileConstantsIPHISDNFRA]
TapiMediaName = "553X RNIS"
[FileConstantsIPHDMENG]
TapiMediaName = "5536 Digital Modem"
[FileConstantsIPHDMFRA]
TapiMediaName = "5536 Digital Modem"
[DialogConstantsENG]
Help = "&Help"
Exit = "Cancel"
OK = "OK"
HelpContext = ""
Continue = "Continue"
Cancel = "Cancel"
[DialogConstantsFRA]
Help = "&Aide"
Exit = "Quitter"
OK = "OK"
HelpContext = ""
Continue = "Continuer"
Cancel = "Annuler"
;-----------------------------------------------------
;
; Messages d'installation et de configuration RAS
;
;-----------------------------------------------------
[InvokeRasDlgENG]
InvokeRasSetupMsg = "Interphase RAS Support setup is complete. "+
"Remote Access Services (RAS) must now be installed. "+
"Please update the "$(TapiMediaType)"(n) port list in RAS "+
"setup to enable you to use RAS over "$(TapiMediaName)"."
InvokeRasConfigMsg = "Interphase RAS Support setup is complete. "+
"Remote Access Services (RAS) setup must now be invoked. "+
"Please update the "$(TapiMediaType)"(n) port list in RAS "+
"setup to enable you to use RAS over "$(TapiMediaName)"."
InvokeRasError = "Interphase RAS Support setup encountered an error "+
"while invoking the RAS setup INF file (OEMNSVRA.INF). "+
"Please make sure that the file is present in this "+
"directory: "$(!STF_WINDOWSSYSPATH)"."
InvokeRasAgainMsg = "Interphase RAS Support setup is complete! "+
"Remote Access Services (RAS) is not configured to use a "+
$(TapiMediaType)"(n) port. You must configure at least one "+
"port in RAS setup now, or you will have reconfigure the adapter "+
"before running RAS configuration again later."
NeedLoopback = "RAS Setup has discovered your computer does not have a network adapter installed. "+
"If you have configured one or more ports to receive calls, you must install the "+
"MS Loopback Adapter to enable remote clients to use resources on this computer."+
$(LF)$(LF)"Click OK to install the MS Loopback Adapter."
[InvokeRasDlgFRA]
InvokeRasSetupMsg = "La configuration du support RAS Interphase est terminée. "+
"Le service d'accès distant (RAS) doit être installé. "+
"Puis, veuillez mettre à jour la liste des ports "$(TapiMediaType)"(n) "+
"dans la configuration RAS pour utiliser l'accès "$(TapiMediaName)"."
InvokeRasConfigMsg = "La configuration du support RAS Interphase est terminée. "+
"Veuillez mettre à jour la liste des ports "$(TapiMediaType)"(n) dans la "+
"configuration du Service d'Accès Distant (RAS) pour utiliser le "+
"réseau "$(TapiMediaName)"."
InvokeRasError = "La configuration du support RAS Interphase a rencontré "+
"une erreur dans le fichier du logiciel d'accès distant (OEMNSVRA.INF). "+
"Vérifiez la présence et le contenu de ce fichier dans le répertoire "+
$(!STF_WINDOWSSYSPATH)"."
InvokeRasAgainMsg = "La configuration du support RAS Interphase est terminée! "+
"Le service d'accès distant (RAS) n'est pas configuré pour "+
"utiliser un port "$(TapiMediaType)"(n).Avant de rajouter un port "+
"dans la configuration RAS, vous devrez obligatoirement reconfigurer "+
"l'adaptateur Interphase Support RAS "$(TapiMediaName)"."
NeedLoopback = "Le programme d'installation de RAS a découvert que votre ordinateur n'a pas de "+
"carte réseau local installée. Si vous avez configuré un ou plusieurs ports pour recevoir "+
"des appels,vous devez installer la carte de bouclage MS pour permettre aux clients "+
"distants d'utiliser les ressources sur cet ordinateur."+
$(LF)$(LF)"Cliquez sur OK pour installer la carte de bouclage MS."
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.