SPTRAK.INF Driver File Contents (ST66D110b22.ZIP)

[Version]
Signature="$Chicago$"
Class=SCSIAdapter
ClassGuid={4D36E97B-E325-11CE-BFC1-08002BE10318}
Provider=%PROMISE%
DriverVer=10/09/2000,1.10 Build 22

[SourceDisksNames]
1 = "Promise SuperTrak Driver Diskette",,,

[SourceDisksFiles]
sptrak.sys = 1
sptrak.inf = 1
;spultra.sys = 1

[ClassInstall32.NT]
AddReg=SCSIReg

[SCSIReg]
HKR,,,,%SCSIClassName%
HKR,,Installer32,,"SysSetup.dll,SCSIClassInstaller"
HKR,,Icon,,"-10"
HRK,,LegacyInfOption,,"SCSI"

[DestinationDirs]
DefaultDestDir = 12 ; Drivers directory
MoveSptrak.NT = 12
MoveSpultra.NT = 12

[ControlFlags]

[Manufacturer] 
%Promise%=Promise

[Promise]
;%PCI\VEN_8086&DEV_1960&SUBSYS_0000105A.DeviceDesc%=sptrakPCI,PCI\VEN_8086&DEV_1960&SUBSYS_0000105A
%PCI\VEN_8086&DEV_1960&SUBSYS_5168105A.DeviceDesc%=sptrakPCI66,PCI\VEN_8086&DEV_1960&SUBSYS_5168105A
%PCI\VEN_8086&DEV_1960&SUBSYS_2168105A.DeviceDesc%=sptrakPCIPro,PCI\VEN_8086&DEV_1960&SUBSYS_2168105A
;%PCI\VEN_105A&DEV_4D38&SUBSYS_4D30105A.DeviceDesc%=spUltra,PCI\VEN_105A&DEV_4D38&SUBSYS_4D30105A

[sptrakPCI]
;[spUltra]

[sptrakPCI.NT]
CopyFiles=MoveSptrak.NT
Reboot

[sptrakPCI66.NT]
CopyFiles=MoveSptrak.NT
Reboot

[sptrakPCIPro.NT]
CopyFiles=MoveSptrak.NT
Reboot

;[spUltra.NT]
;CopyFiles=MoveSpultra.NT
;Reboot

[MoveSptrak.NT]
sptrak.sys

;[MoveSpultra.NT]
;spultra.sys

[sptrakPCI.NT.Services]
AddService=sptrak,2,sptrakPCI_Service_Inst,Miniport_EventLog_Inst

[sptrakPCI66.NT.Services]
AddService=sptrak,2,sptrakPCI_Service_Inst,Miniport_EventLog_Inst

[sptrakPCIPro.NT.Services]
AddService=sptrak,2,sptrakPCI_Service_Inst,Miniport_EventLog_Inst

;[spUltra.NT.Services]
;AddService=spultra,2,spultra_Service_Inst,Miniport_EventLog_Inst

[sptrakPCI_Service_Inst]
ServiceType  = 1 ; SERVICE_KERNEL_DRIVER
StartType    = 0 ; SERVICE_BOOT_START
ErrorControl = 1 ; SERVICE_ERROR_NORMAL
ServiceBinary = %12%\sptrak.sys
LoadOrderGroup = SCSI Miniport
AddReg = pnpsafe_pci_addreg

;[spultra_Service_Inst]
;ServiceType  = 1 ; SERVICE_KERNEL_DRIVER
;StartType    = 0 ; SERVICE_BOOT_START
;ErrorControl = 1 ; SERVICE_ERROR_NORMAL
;ServiceBinary = %12%\spultra.sys
;LoadOrderGroup = SCSI Miniport
;AddReg = pnpsafe_pci_addreg

;*************************************************************
;These addreg sections should be used when installins services to indicate
;which interface types are safe for PNP and which aren't.  INTERFACE_TYPE
;is defined in NTDDK.H

[pnpsafe_pci_addreg]
HKR, "Parameters\PnpInterface", "5", 0x00010001, 0x00000001

[pnpsafe_isa_addreg]
HKR, "Parameters\PnpInterface", "1", 0x00010001, 0x00000001

[pnpsafe_eisa_addreg]
HKR, "Parameters\PnpInterface", "2", 0x00010001, 0x00000001

[pnpsafe_mca_addreg]
HKR, "Parameters\PnpInterface", "3", 0x00010001, 0x00000001

[cardbus_interface_type]
HKR, "ScsiPort", "LegacyInterfaceType", 0x00010001, 0x00000005

;*************************************************************
;The EventLog entries are the same for all SCSI miniports.
[Miniport_EventLog_Inst]
AddReg = Miniport_EventLog_AddReg

[Miniport_EventLog_AddReg]
HKR,,EventMessageFile,%REG_EXPAND_SZ%,"%%SystemRoot%%\System32\IoLogMsg.dll"
HKR,,TypesSupported,%REG_DWORD%,7


[Strings]
Promise="Promise Technology, Inc."
;PCI\VEN_8086&DEV_1960&SUBSYS_0000105A.DeviceDesc="Windows2000 Promise SuperTrak (tm) IDE RAID Controller"
PCI\VEN_8086&DEV_1960&SUBSYS_5168105A.DeviceDesc="Windows2000 Promise SuperTrak66/100 (tm) IDE RAID Controller"
PCI\VEN_8086&DEV_1960&SUBSYS_2168105A.DeviceDesc="Windows2000 Promise SuperTrak Pro (tm) IDE RAID Controller"
;PCI\VEN_105A&DEV_4D38&SUBSYS_4D30105A.DeviceDesc= "Windows2000 Promise Ultra Device on SuperTrak (tm) "
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 1.10