************************************************************ ************************************************************ * * Intel(R) 810 and Intel(R) 815 Chipset Family Graphics * Driver for Microsoft* Windows* 98, Microsoft Windows 95, * and Microsoft Windows Millennium Edition* Installation * Information * * Date: August 28, 2000 * * NOTE: This document refers to systems containing the * following Intel(R) Chipsets: * * Intel(R) 810 chipset * Intel(R) 810E chipset * Intel(R) 815 chipset * Intel(R) 815E chipset * * * This document makes references to products developed by * Intel. There are some restrictions on how these products * may be used, and what information may be disclosed to * others. Please read the Disclaimer section at the bottom * of this document, and contact your Intel field * representative if you would like more information. * ************************************************************ ************************************************************ * DISCLAIMER: Intel is making no claims of usability, * efficacy or warranty. The INTEL SOFTWARE LICENSE * AGREEMENT contained herein completely defines the license * and use of this software. ************************************************************ ************************************************************ * CONTENTS OF THIS DOCUMENT ************************************************************ This document contains the following sections: 1. System Requirements 2. Localized Language Abbreviations 3. Installing the Software 4. Verifying Installation of the Software 5. Identifying the Software Version Number 6. Uninstalling the Software 7. Installation Switches Available ************************************************************ * 1. SYSTEM REQUIREMENTS ************************************************************ 1. The system must contain one of the following Intel Chipsets: Intel(R) 810 chipset Intel(R) 810E chipset Intel(R) 815 chipset Intel(R) 815E chipset 2. The software should be installed on systems with at least 32 MB of system memory. 3. There should be sufficient hard disk space in the <TEMP> directory (typically C:\WINDOWS\TEMP or C:\TEMP) on the system in order to install this software. The drivers included with this distribution package are designed to function with all released versions of Microsoft Windows 95, Microsoft Windows 98, and Microsoft Windows Millennium Edition. Please check with your system provider to determine the operating system and Intel Chipset used in your system. ************************************************************ * 2. LOCALIZED LANGUAGE ABBREVIATIONS ************************************************************ The following list is the abbreviations of all languages that the driver has been localized in. You may have to reference this section while using this document. chs -> Mainland Chinese cht -> Traditional Chinese dan -> Danish deu -> German eng -> International English enu -> English esp -> Spanish fin -> Finnish fra -> French frc -> French Canadian ita -> Italian jpn -> Japanese kor -> Korean nld -> Dutch nor -> Norwegian plk -> Polish ptb -> Brazilian Portuguese ptg -> Portuguese rus -> Russian sve -> Swedish tha -> Thai ************************************************************ * 3. INSTALLING THE SOFTWARE ************************************************************ General Installation Notes: 1. The operating system must be installed prior to the installation of the driver. 2. This installation procedure is specific only to the version of driver and installation file included in this release. 3. If a previous version of an Intel(R) Graphics Driver is installed, remove it before proceeding with the installation procedure. Please refer to Section 6, UNINSTALLING THE SOFTWARE for removal instructions. 4. You can choose four different methods of installation for this release. The files that must be downloaded for each are indicated in the appropriate section. 1) InstallShield* (automated) install from CD-ROM See Section 4.1. 2) InstallShield* (automated) install from web download See Section 4.1. 3) Manual install from hard drive See Section 4.2. 4) Manual install from CD-ROM see Section 4.2. 4.1 INSTALLSHIELD (AUTOMATED) INSTALL FROM CD-ROM or WEB DOWNLOAD 1. To install from a CD, insert the CD-ROM. If autorun is enabled, the installer will begin automatically. Otherwise, enter the "Graphics" directory on the CD-ROM and double-click "SETUP.EXE". Continue on to step 3. 2. To install from a Web download, you will download either a ZIP file or an EXE file from the Web. a. If it is an EXE file, double-click the file you downloaded and the installation will begin automatically. Continue on to step 3. b. If it is a ZIP file, you must unzip it using a utility such as WinZip* or PKZip*, then enter the directory into which you unzipped the files. Enter the "Graphics" subdirectory and double-click "SETUP.EXE". Continue on to step 3. 3. Click "Next" on the Welcome screen. 4. Read the license agreement and click "Yes" to continue. 5. The driver files will now be installed. When the install finishes, choose the "Yes" to reboot option, and click "Finish" to restart your computer. The driver should now be loaded. To determine if the driver has been loaded correctly, refer to the Verifying Installation section below. 4.2 MANUAL INSTALL FROM CD-ROM OR HARD DRIVE 1. Download "WIN9X.ZIP" from the Web. You must unzip it using a utility such as WinZip* or PKZip*. Transfer the files to a CD if you wish to install from the CD-ROM. 2. Select the "My Computer" icon, the "Control Panel" icon, and then the "Display" icon. 3. You should now be in the "Display Properties" window. Select the "Settings" tab, and click on the "Advanced" button. 4. In the "Advanced Display Properties" window, select the "Adapter" tab, and click the "Change..." button. 5. The "Update Device Driver Wizard" window appears. Click on the "Next" button to continue. 6. A new window appears, prompting either for Windows to search for a device driver or for manual selection. Click the following option: "Display a list of all the drivers in a specific location, so you can select the driver you want." After this, click on the "Next" button. 7. From the new window, click on the "Have Disk" button and then the "Browse" button. 8. Enter the directory where you unzipped WIN9X.ZIP and then enter the "Graphics" subdirectory. Next enter the "Win9X" subdirectory. At this point, the "I81XW9X.INF" file should be highlighted. Click "OK". 9. Click "OK". The "Select Device" screen should open and it may it may have several options to choose from. If a warning appears saying that the driver chosen was not written specifically for the selected hardware, click "Yes". Select the display adapter that your system contains. Click "OK". 10. Click "Next". The driver should install. If you are installing an older version of the driver after having previously installed a newer version, several "Version Conflict" windows may appear asking if you want to keep the newer driver files. If you do want to continue installing the older drivers, click "No" on each of these screens. Click "Finish" when done. 11. Close all open windows and click "Yes" to reboot. The driver should now be loaded. To determine if the driver has been loaded correctly, refer to the Verifying Installation section below. ************************************************************ * 4. VERIFYING INSTALLATION OF THE SOFTWARE ************************************************************ 1. From the desktop, click on "My Computer", then "Control Panel", and finally, "System". 2. You should be in the "System Properties" window. Click on the "Device Manager" tab. From here, go down to "Display Adapter" and click. The Intel(R) Graphics Driver should be listed. If not, the driver is not installed correctly. To check the version of the driver, refer to the section below. ************************************************************ * 5. IDENTIFYING THE SOFTWARE VERSION NUMBER ************************************************************ 1. Select the "My Computer" icon, the "Control Panel" icon, and then the "Display" icon. 2. You should now be in the "Display Properties" window. Select the "Settings" tab and click the "Advanced" button. 3. Select the "Intel(R) Graphics Technology" tab. The graphics driver version should be listed on this screen. ************************************************************ * 6. UNINSTALLING THE SOFTWARE ************************************************************ NOTE: This procedure assumes the above installation process was successful. This uninstallation procedure is specific only to the version of the driver and installation files included in this package. 1. From the desktop, click on "My Computer", "Control Panel", and then "Display". 2. You should be in the "Display Properties" window. Click on the "Settings" tab. Next, click the "Advanced" button. 3. Select the "Adapter" tab. The driver information will appear. Click on the "Change" button. 4. The "Update Device Driver Wizard" window should open. Click "Next". 5. In the next window, select the "Display a list" option and click the "Next" button. Next, click on "Show all hardware". 6. In the split screen window under "Manufacturers:", select "(Standard display types)". In the other half of the split window, select "Standard PCI Graphics Adapter (VGA)", then click on the "Next" button. 7. Click on "Finish," then close all open windows. When asked to restart, click on "Yes." 8. To verify that the VGA driver was installed correctly, refer to Section 4 and look for "Standard PCI Graphics Adapter (VGA)," instead of the Intel(R) Graphics Driver. ************************************************************ * 7. INSTALLATION SWITCHES AVAILABLE ************************************************************ The switches in the SETUP.EXE file will have the following syntax. Switches are not case sensitive and may be specified in any order (except for the -s switch). Switches must be separated by spaces. SETUP [-b] [-no{pp}] [-basic] [-g{xx[x]}] [-nomsg] [-16x640x480][-nolic] [-s] -b Forces a system reboot after the installation completes. -no{pp} Disables the specified Intel-designed property pages. {pp} is one of the following: {pp} Description clr Removes the color property page from the Display Properties sheet tvout Removes the TV-Out property page from the Display Properties sheet fp Removes the Flat Panel property page from the Display Properties sheet ver Removes the Version property page from the Display Properties sheet display Removes the Display property page from the Display Properties sheet diag Removes the end-user diagnostic button found on the Version tab -basic Removes all Intel-designed property pages/features from the Display Properties sheet. This switch overrides all -no{pp} switch settings. -g{xx[x]} Forces the installation to install a particular language version of the driver. The messages displayed to the user are also displayed in the language specified. If the language version of the operating system on which the installation is being run doesn’t support the specified language, the displayed messages may be garbage text. {xx[x]} is one of the following: {xx[x]} Language CHS or CH Chinese (Simplified) CHT or TW Chinese (Traditional) DAN or DK Danish DEU or GR German ENG English (UK) ENU or US English (US) ESM Spanish (Mexican) ESN or SP Spanish (Modern) ESP Spanish (Traditional) FIN or FI Finnish FRA or FR French (Standard) FRC French (Canadian) ITA or IT Italian JPN or JP Japanese KOR or KR Korean NLD or NL Dutch NOR or NO Norwegian (Bokmal) PLK or PL Polish PTB or BR Portuguese (Brazilian) PTG or PT Portuguese RUS or RU Russian SVE or SE Swedish THA or TH Thai -nomsg Suppresses the displaying of non-critical messages. During the file-copy process when installing the driver (not the EUD), the installation program may come across earlier or later versions of system files. The install will never replace newer versions of these files. It may replace older versions of files. If the older file is not read-only, it will be replaced. When the older file is read-only, this switch instructs the install to not prompt the user for confirmation to over write the older file. In this case it will always overwrite the older file. If the switch is not specified, the user will be prompted to confirm overwriting the older file. This flag has no affect on the installation of system files required by the EUD. -nolic Suppresses the display of the license agreement screen. --<color depth>x<horizontal resolution>x<vertical resolution>x <refresh rate> Sets the default display mode. If no display mode switch is specified, the display mode will be set to 16x800x600. Example: -8x640x480x70 will set the color palette to 256 colors (8-bit color depth), the desktop resolution to 640x480, and the refresh frequency to 70 hertz. If no display mode switch is specified, the display mode will be set to 16x800x600x60. -s Run in blind mode. In blind mode all visual indication that the installation is taking place is disabled. In blind mode the installation requires no user interaction and all selections which normally require user input will use the default selections. This switch must be the last switch specified on the command line. Specifying Default Switches Default switches may be specified by modifying the SETUP.INI and INSTALL.CFG files. When the install program is invoked it first reads the SETUP.INI file to see if the blind mode switch is specified. If it is, the install program will always run in blind mode regardless of what switches are specified in the INSTALL.CFG file and on the invocation command line. After reading the SETUP.INI file it checks to see if other switches apply. If switches were specified on the command line, it ignores any switches specified in the INSTALL.CFG file and uses only those specified on the command line. If no switches were specified on the command line, it reads the INSTALL.CFG file and uses switches specified in that file. SETUP.INI Switches The only switch that may be specified in the SETUP.INI file is the blind mode switch (-s). No other switches may be specified in this file. All other switches should be specified in the INSTALL.CFG file. The blind mode switch is added to the CmdLine line of the [Startup] section as follows: [Startup] CmdLine=-s INSTALL.CFG Switches All switches except for the blind mode switch (-s) may be specified in the INSTALL.CFG file. They should be added to the CmdLine line in the [Configuration] section following the format specified in the Command Line Syntax section above. An example INSTALL.CFG file is should below: [Configuration] CmdLine=-16x640x480 -b -notvout Example Invocation Syntax SETUP -s SETUP -b SETUP -gus -b -s SETUP -gGR SETUP -basic -gNOR SETUP -notvout -s SETUP -16x640x480 -b -s ************************************************************ * INTEL SOFTWARE LICENSE AGREEMENT * (OEM/IHV/ISV Distribution & Single User) ************************************************************ IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING. Do not use or load this software and any associated materials (collectively, the "Software") until you have carefully read the following terms and conditions. By loading or using the Software, you agree to the terms of this Agreement. If you do not wish to so agree, do not install or use the Software. Please Also Note: * If you are an Original Equipment Manufacturer (OEM), Independent Hardware Vendor (IHV), or Independent Software Vendor (ISV) this complete LICENSE AGREEMENT applies; * If you are an End-User, then only Exhibit A, the INTEL SOFTWARE LICENSE AGREEMENT, applies. --------------------------------------------------------- For OEMs, IHVs, and ISVs: LICENSE. This Software is licensed for use only in conjunction with Intel component products. Use of the Software in conjunction with non-Intel component products is not licensed hereunder. Subject to the terms of this Agreement, Intel grants to You a nonexclusive, nontransferable, worldwide, fully paid-up license under Intel's copyrights to: a) use, modify, and copy Software internally for Your own development and maintenance purposes; and b) modify, copy and distribute Software, including derivative works of the Software, to Your end-users, but only under a license agreement with terms at least as restrictive as those contained in Intel's Final, Single-User License Agreement, attached as Exhibit A; and c) modify, copy and distribute the end-user documentation that may accompany the Software, but only in association with the Software. If You are not the final manufacturer or vendor of a computer system or software program incorporating the Software, then You may transfer a copy of the Software, including derivative works of the Software (and related end-user documentation), to Your recipient for use in accordance with the terms of this Agreement, provided such recipient agrees to be fully bound by the terms hereof. You shall not otherwise assign, sublicense, lease or in any other way transfer or disclose Software to any third party. You shall not reverse-compile, disassemble or otherwise reverse-engineer the Software. Except as expressly stated in this Agreement, no license or right is granted to You directly or by implication, inducement, estoppel or otherwise. Intel shall have the right to inspect or have an independent auditor inspect Your relevant records to verify Your compliance with the terms and conditions of this Agreement. CONFIDENTIALITY. If You wish to have a third-party consultant or subcontractor ("Contractor") perform work on Your behalf that involves access to or use of Software, You shall obtain a written confidentiality agreement from the Contractor that contains terms and obligations with respect to access to or use of Software no less restrictive than those set forth in this Agreement and excluding any distribution rights, and use for any other purpose. Otherwise, You shall not disclose the terms or existence of this Agreement or use Intel's name in any publications, advertisements or other announcements without Intel's prior written consent. You do not have any rights to use any Intel trademarks or logos. OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of the Software remains with Intel or its suppliers. The Software is copyrighted and protected by the laws of the United States and other countries, and by international treaty provisions. You may not remove any copyright notices from the Software. Intel may make changes to the Software, or to items referenced therein, at any time without notice, but is not obligated to support or update the Software. Except as otherwise expressly provided, Intel grants no express or implied right under Intel patents, copyrights, trademarks or other intellectual property rights. You may transfer the Software only if the recipient agrees to be fully bound by these terms and if you retain no copies of the Software. LIMITED MEDIA WARRANTY. If the Software has been delivered by Intel on physical media, Intel warrants the media to be free from material, physical defects for a period of ninety(90) days after delivery by Intel. If such a defect is found, return the media to Intel for replacement or alternate delivery of the Software as Intel may select. EXCLUSION OF OTHER WARRANTIES. EXCEPT AS PROVIDED ABOVE, THE SOFTWARE IS PROVIDED "AS IS," WITHOUT ANY EXPRESS OR IMPLIED WARRANTY OF ANY KIND, INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT OR FITNESS FOR A PARTICULAR PURPOSE. Intel does not warrant or assume responsibility for the accuracy or completeness of any information, text, graphics, links or other items contained within the Software. LIMITATION OF LIABILITY. IN NO EVENT SHALL INTEL OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, LOST PROFITS, BUSINESS INTERRUPTION OR LOST INFORMATION) ARISING OUT OF THE USE OF OR INABILITY TO USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT EXCLUSION OR LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES OR CONSEQUENTIAL OR INCIDENTAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE OTHER LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION. TERMINATION OF THIS AGREEMENT. Intel may terminate this Agreement at any time if you violate its terms. Upon termination, you will immediately destroy the Software or return all copies of the Software to Intel. APPLICABLE LAWS. Claims arising under this Agreement shall be governed by the laws of California, excluding its principles of conflict of laws and the United Nations Convention on Contracts for the Sale of Goods. You may not export the Software in violation of applicable export laws and regulations. Intel is not obligated under any other agreements unless they are in writing and signed by an authorized representative of Intel. GOVERNMENT RESTRICTED RIGHTS. The Software is provided with "RESTRICTED RIGHTS." Use, duplication or disclosure by the Government is subject to restrictions as set forth in FAR52.227-14 and DFAR252.227-7013 et seq. or their successors. Use of the Software by the Government constitutes acknowledgment of Intel's proprietary rights therein. Contractor or Manufacturer is Intel Corporation, 2200 Mission College Blvd., Santa Clara, CA 95052. --------------------------------------------------------- EXHIBIT "A" INTEL SOFTWARE LICENSE AGREEMENT (Final, Single User) IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING. Do not use or load this software and any associated materials (collectively, the "Software") until you have carefully read the following terms and conditions. By loading or using the Software, you agree to the terms of this Agreement. If you do not wish to so agree, do not install or use the Software. LICENSE. You may copy the Software onto a single computer for your personal, non-commercial use, and you may make one back-up copy of the Software, subject to these conditions: 1. This Software is licensed for use only in conjunction with Intel component products. Use of the Software in conjunction with non-Intel components is not licensed hereunder. 2. You may not copy, modify, rent, sell, distribute or transfer any part of the Software except as provided in this Agreement, and you agree to prevent unauthorized copying of the Software. 3. You may not reverse-engineer, decompile or disassemble the Software. 4. You may not sublicense or permit simultaneous use of the Software by more than one user. 5. The Software may contain the software or other property of third-party suppliers, some of which may be identified in, and licensed in accordance with, any enclosed "license.txt" file or other text or file. OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of the Software remains with Intel or its suppliers. The Software is copyrighted and protected by the laws of the United States and other countries, and international treaty provisions. You may not remove any copyright notices from the Software. Intel may make changes to the Software, or to items referenced therein, at any time without notice, but is not obligated to support or update the Software. Except as otherwise expressly provided, Intel grants no express or implied right under Intel patents, copyrights, trademarks or other intellectual property rights. You may transfer the Software only if the recipient agrees to be fully bound by these terms and if you retain no copies of the Software. LIMITED MEDIA WARRANTY. If the Software has been delivered by Intel on physical media, Intel warrants the media to be free from material, physical defects for a period of ninety(90) days after delivery by Intel. If such a defect is found, return the media to Intel for replacement or alternate delivery of the Software as Intel may select. EXCLUSION OF OTHER WARRANTIES. EXCEPT AS PROVIDED ABOVE, THE SOFTWARE IS PROVIDED "AS IS," WITHOUT ANY EXPRESS OR IMPLIED WARRANTY OF ANY KIND, INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT OR FITNESS FOR A PARTICULAR PURPOSE. Intel does not warrant or assume responsibility for the accuracy or completeness of any information, text, graphics, links or other items contained within the Software. LIMITATION OF LIABILITY. IN NO EVENT SHALL INTEL OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, LOST PROFITS, BUSINESS INTERRUPTION OR LOST INFORMATION) ARISING OUT OF THE USE OF OR INABILITY TO USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT EXCLUSION OR LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES OR CONSEQUENTIAL OR INCIDENTAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE OTHER LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION. TERMINATION OF THIS AGREEMENT. Intel may terminate this Agreement at any time if you violate its terms. Upon termination, you will immediately destroy the Software or return all copies of the Software to Intel. APPLICABLE LAWS. Claims arising under this Agreement shall be governed by the laws of California, excluding its principles of conflict of laws and the United Nations Convention on Contracts for the Sale of Goods. You may not export the Software in violation of applicable export laws and regulations. Intel is not obligated under any other agreements unless they are in writing and signed by an authorized representative of Intel. GOVERNMENT RESTRICTED RIGHTS. The Software is provided with "RESTRICTED RIGHTS." Use, duplication or disclosure by the Government is subject to restrictions as set forth in FAR52.227-14 and DFAR252.227-7013 et seq. or their successors. Use of the Software by the Government constitutes acknowledgment of Intel's proprietary rights therein. Contractor or Manufacturer is Intel Corporation, 2200 Mission College Blvd., Santa Clara, CA 95052. SLAOEMISV1/RBK/January 21, 2000 ************************************************************ ************************************************************ Information in this document is provided in connection with Intel products. Except as expressly stated in the INTEL SOFTWARE LICENSE AGREEMENT contained herein, no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel's Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products, including liability or warranties relating to fitness for a particular purpose, merchantability or infringement of any patent, copyright or other intellectual property right. Intel products are not intended for use in medical, lifesaving, or life-sustaining applications. ************************************************************ * Intel Corporation disclaims all warranties and liabilities * for the use of this document, the software and the * information contained herein, and assumes no * responsibility for any errors which may appear in this * document or the software, nor does Intel make a commitment * to update the information or software contained herein. * Intel reserves the right to make changes to this document * or software at any time, without notice. ************************************************************ * Third-party brands and names are the property of their respective owners. Copyright (c) Intel Corporation, 1998-2000Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.