; Gateway GWBoot System Install v5.02 Hunter Beanland ; Driver Pack F ; Format: Config=idString,description,config.sys line. no device=. ; up to 32 device lines only Config=NEC+OTI,IDE Generic Oak (Creative/NEC/Octek),OAKCDROM.SYS /D:MSCD001 Config=CD4,IDE Generic Creative,SBIDE.SYS /D:MSCD001 Config=CD2,IDE Generic Creative 4 Speed (old driver),SBIDE108.SYS /D:MSCD001 Config=HITACHI,IDE Hitachi 4 Speed,HIT-IDE.SYS /D:MSCD001 /R:2 ; Optional Hitachi Params: /T:2 /N:1 for 1 drive fast install Config=UJD,IDE Kyushu (Solo 2000,5100 & Liberty),KMEATAPI.SYS /D:MSCD001 /O:S /P:P Config=FX+XF,IDE Mitsumi,MTMCDAI.SYS /D:MSCD001 Config=MATS,IDE Panasonic,CR_ATAPI.SYS /D:MSCD001 Config=CDR_S,IDE Sanyo 6 Speed,TSYCDROM.SYS /D:MSCD001 Config=CDR_U,IDE Sanyo 20 Speed (Solo 5100),TRICD.SYS /D:MSCD001 Config=55E,IDE Sony 2 Speed,ATAPI_CD.SYS /D:MSCD001 Config=CD-4+CD-2,IDE Teac (Solo 2x00),TEAC_CDI.SYS /D:MSCD001 Config=TOSHIBA,IDE Toshiba (All + Solo 9100),TAISATAP.SYS /D:MSCD001 Config=WEARNES,IDE Wearnes,WCD.SYS /D:MSCD001 Config=,SCSI Adaptec controller (ASPI CD),ASPICD.SYS /D:MSCD001 Config=,MKE Creative 2 button 2 Speed,CCD.SYS /D:MSCD001 /P:220 Config=,MKE Gallant controller 2 Speed,CDMKEG.SYS /D:MSCD001 /P:230 Config=,MKE Gallant with Panasonic controller 2 Speed (@340h),CDMKE.SYS /D:MSCD001 /P:340 Config=,MKE Panasonic controller 2 Speed (@320h),CDMKE.SYS /D:MSCD001 /P:320 Config=,MKE Panasonic controller 2 Speed (@300h),CDMKE.SYS /D:MSCD001 /P:300 Config=,MKE Panasonic 563 2 Speed,SBCD.SYS /D:MSCD001 /P:220 Config=,MKE Panasonic 562 2 Speed,SBCD411.SYS /D:MSCD001 /P:220 Config=,MKE Panasonic 521 1 Speed,SBPCD.SYS /D:MSCD001 /P:220 ;If CD is not found in the list, pick Config# NODETECT=1 ;Format: ASPI=driver (aspi driver for aspi cd) ASPI=ASPI8DOS.SYS /D ;Format: Autoexec=autoexec line (that loads MSCDEX or equiv) Autoexec=@LH C:\CDROM\MSCDEX.EXE /D:MSCD001 /V /S /E /M:12 ;GWCDROM.EXE CDROM driver pack version (to check if latest driver pack is ;installed on the HD. DRIVERS?.TXT must exist in the GWCDROM.EXE pack) GWCDROM=F ;Only scan bottom x configs when loading non-IDE drivers for detection. NONIDE=9Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.