Technical Release Notes: ------------------------ 3.07 09/17/01 1) Fix the problem that when a CPU frequency multiplier that is too high for unlocked CPU, the CMOS value can't be changed until AC power cord is unplugged 2) Fix the problem that if the PS/2 mouse or keyboard event occurs while entering to S1 state then the PS/2 mouse or keyboard event can't awake the computer from S1 In the W2K and WinXP. 3.06 08/30/01 1) Fix that the tualatin celeron(FSB 100MHz) processor is recognized as the Pentium III type 2) Modify BIOS SETUP by HP XP BIOS spec. 3.02 : Remove the options for floppy disk controller 3) Change the USB lowest wakeup capability from S4 to S1 4) Fix the PnP OS option problem : The BIOS assigns IRQ to onboard device(audio codec) even though PnP OS is enabled. 3.05 08/17/01 1) Fix the USB KB issue on boot menu : The USB KBD doesn't work on Boot menu by ESC key 2) Fix the HCT 10.0 Error : FoxFire test error - PME_status bit was not set to 1 3.04 08/10/01 1) Support Tualatin processor 2) Make one BIOS for Fresno and Pinole :Decide LPC_PME pin by SIO GP40 (Fresno:GPI6, Pinole:GPI11) 3) The default language is controlled by the contents of the DMI system product name string(New tattoo format is applied) 4) Fix the KBD/mouse wakeup event problem from WinXP S1 state :The user has to press a key(or mouse click) twice to wake-up from WinXP S1 state 5) Fix the HCT 9.6 unreported memory error in Win ME 6) Modify BIOS SETUP by HP XP BIOS spec. 3.02 - Remove 360KB and 1.2MB options in Legacy Diskette A menu - Add the option for onboard video memory - Remove the option for Large Disk Access Mode - PCI configuration menu shows by F11 key - Change the order of Removable Device Priority and Hard Drive Priority 3.03 07/19/01 1) display manufacturing ID of IDE 2) fix cheetah modem error under WinXP 3) change setup string "Installed O/S" to "Plug and Play OS" 4) change setup string "Frequency Ratio" to "CPU Multiplier" 3.02 07/10/01 1) Remove LBASSIST 2) Define SCI interrupt in APIC Table (to work Power button properly under APIC enabled) 3.01 06/29/01 1) Change GPI of LPC_PME# 2) Remove S3 option in the Setup 3.00 06/24/01 Initial releaseDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.