Specifications Processor Supports Socket A for AMD® AthlonTM & DuronTM Processors Supports CPU Speed From 600 MHz up to 1.2GHz and Higher Supports adjustable Vcore & VIO Chipset VIA® ApolloTM KT133A chipset VIA® VT82C686B chipset AMI® ATA/100 IDE RAID (KK266-R) C-media CMI8738 4.1 channel hardware sound Bus Frequency Supports DDR266/200 MHz FSB MicroStepping Iwill CPU Frequency Setting Bye-Bye Jumper IWILL Smart Setting (Software CPU Frequency Setting) System Memory 3 x 168-pin DIMM Sockets Support up to 1.5 GB of PC133 Memory Supports PC133/PC100 SDRAM and VCM Memory Types Supports 64/128/256/512 MB SDRAM Modules Supports 3.3V Unbuffered/Registered DIMM On Board IDE Dual ATA 100/66/33 IDE Channels Supports ATAPI IDE CD-ROM, ZIP-100 & LS-120 Audio C-Media® CMI-87383D Sound Chip 4.1 Channel Hardware Sound 32-voice HRTF-base 3D Positional Audio Supports Microsoft® DirectSoundTM and Aureal® A3D Supports EAX (Environmental Audio eXtension) Sound Effects I/O Interface 1 x FDD (Floppy Port) 2 x ATA/100 IDE Ports 1 x PS/2 Mouse (supports auto swapping) 1 x PS/2 Keyboard (supports auto swapping) 1 x Parallel Port 2 x Serial Ports 4 x USB Ports (2 x optional) 3 x Audio Ports (Line-IN/Line-OUT/MIC) 1 x Game/MIDI Port 1 x Chassis Intrusion Header 1 x Internal IR Header 1 x SMBus Header Expansion Slots 1 x AGP Slot (AGP 4X/2X Mode; 32-bit/66 MHz AGP Protocol) 6 x PCI 2.2 Bus Master Slots 1 x ISA Slot BIOS 2 Mb EEPROM with Flash Protection "Bye-Bye Jumper" Iwill Smart Setting PC99 Compliant Supports Plug and Play (PnP) Supports ACPI 1.0 Supports APM 1.2 Supports DMI 2.1 Power Management RTC Alarm Wake ON LAN (WOL) Wake ON Modem (WOM) Windows 2000/98/95 Power Off Board Size ATX Form Factor - 12 in x 9.5 in (305 mm x 240 mm) Special Utilities Acrobat Reader Audio Rack Sound Utility Auto Run Iwill Power Installer CD with Tools and Manual Hardware Monitoring Utility Trend-Micro full-function PC-Cillin Anti-Virus program Package Contents 1 x Iwill KK266 Motherboard 1 x User Manual 1 x Iwill Power Installer CD 1 x ATA/100 IDE Cable 1 Floppy CableDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.