; PCMCOM.INF -- This file contains descriptions of PCMCIA SERIAL card
[version]
LayoutFile=layout.inf
signature="$CHICAGO$"
Class=Ports
ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
Provider=%MfgName%
DriverVer=11/14/1999,5.00.2183.1
[DestinationDirs]
DefaultDestDir = 11 ;LDID_SYS
LptPort.NT.Copy = 12 ;DIRID_DRIVERS
ComPort.NT.Copy = 12 ;DIRID_DRIVERS
SerialEnumerator.NT.Copy=12 ;DIRID_DRIVERS
; Install class "Ports"
;----------------------------------------------------------
[ClassInstall]
AddReg=PortsClass.AddReg
[PortsClass.AddReg]
HKR,,,,%PortsClassName%
[ClassInstall32.NT]
AddReg=PortsClass.NT.AddReg
[PortsClass.NT.AddReg]
HKR,,,,%PortsClassName%
HKR,,Icon,,"-23"
HKR,,Installer32,,"MsPorts.Dll,PortsClassInstaller"
[ControlFlags]
ExcludeFromSelect=PCMCIA\PCMCIA-RS-COM_1P-A6D0
ExcludeFromSelect=PCMCIA\ARGOSY-RS-COM_1P-5A7A
; Drivers
;----------------------------------------------------------
[Manufacturer]
%MfgName%=Generic
[Generic]
%PCMCOM.DeviceDesc% = ComPort, PCMCIA\PCMCIA-RS-COM_1P-A6D0
%PCMCOM.DeviceDesc% = ComPort, PCMCIA\ARGOSY-RS-COM_1P-5A7A
[ComPort]
CopyFiles=ComPort.Copy
AddReg=ComPort.AddReg, ComPort.W95.AddReg
LogConfig=c14,c1a,c23,c2a,c34,c3a,c43,c4a,caa
[ComPort.Copy]
serial.vxd
serialui.dll
[ComPort.AddReg]
HKR,,PortSubClass,1,01
[ComPort.W95.AddReg]
HKR,,DevLoader,,*vcomm
HKR,,Enumerator,,serenum.vxd
HKR,,PortDriver,,serial.vxd
HKR,,Contention,,*vcd
HKR,,ConfigDialog,,serialui.dll
HKR,,DCB,3,1C,00,00,00, 80,25,00,00, 11,33,00,00, 00,00, 0a,00, 0a,00, 08, 00, 00, 11, 13, 00, 00, 00
HKR,,EnumPropPages,,"serialui.dll,EnumPropPages"
[ComPort.NT]
CopyFiles=ComPort.NT.Copy
AddReg=ComPort.AddReg, ComPort.NT.AddReg
LogConfig=c14,c1a,c23,c2a,c34,c3a,c43,c4a,caa
SyssetupPnPFlags = 1
[ComPort.NT.HW]
AddReg=ComPort.NT.HW.AddReg
[ComPort.NT.Copy]
serial.sys
serenum.sys
[ComPort.NT.AddReg]
HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
; Uncomment the following line if you want to override the advanced dialog for
; your device. See msports.h for protoype of OverrideAdvancedFunction
; HKR,,EnumAdvancedDialog,,"yourdll.dll,OverrideAdvancedFunction"
[ComPort.NT.HW.AddReg]
HKR,,"UpperFilters",0x00010000,"serenum"
[SerialEnumerator.NT]
CopyFiles=SerialEnumerator.NT.Copy
[SerialEnumerator.NT.Copy]
serenum.sys
;-------------- Service installation
; Port Driver (function driver for this device)
[ComPort.NT.Services]
AddService = Serial, 0x00000002, Serial_Service_Inst, Serial_EventLog_Inst
AddService = Serenum,,Serenum_Service_Inst
[SerialEnumerator.NT.Services]
AddService = Serenum,,Serenum_Service_Inst
; -------------- Serial Port Driver install sections
[Serial_Service_Inst]
DisplayName = %Serial.SVCDESC%
ServiceType = 1 ; SERVICE_KERNEL_DRIVER
StartType = 1 ; SERVICE_SYSTEM_START (this driver may do detection)
ErrorControl = 0 ; SERVICE_ERROR_IGNORE
ServiceBinary = %12%\serial.sys
LoadOrderGroup = Extended base
; -------------- Serenum Driver install section
[Serenum_Service_Inst]
DisplayName = %Serenum.SVCDESC%
ServiceType = 1 ; SERVICE_KERNEL_DRIVER
StartType = 3 ; SERVICE_DEMAND_START
ErrorControl = 1 ; SERVICE_ERROR_NORMAL
ServiceBinary = %12%\serenum.sys
LoadOrderGroup = PNP Filter
[Serial_EventLog_Inst]
AddReg = Serial_EventLog_AddReg
[Serial_EventLog_AddReg]
HKR,,EventMessageFile,0x00020000,"%%SystemRoot%%\System32\IoLogMsg.dll;%%SystemRoot%%\System32\drivers\serial.sys"
HKR,,TypesSupported,0x00010001,7
; The following sections are COM port resource configs.
; Section name format means:
; Char 1 = c (COM port)
; Char 2 = I/O config: 1 (3f8), 2 (2f8), 3 (3e8), 4 (2e8), a (any)
; Char 3 = IRQ config: #, a (any)
[c14] ; COM1,IRQ4
ConfigPriority=HARDRECONFIG
IOConfig=3f8-3ff(3ff::)
IRQConfig=S:4
[c1a] ; COM1, any IRQ
ConfigPriority=HARDRECONFIG
IOConfig=3f8-3ff(3ff::)
IRQConfig=S:3,4,5,7,9,10,11,12,14,15
[c23] ; COM2, IRQ3
ConfigPriority=HARDRECONFIG
IOConfig=2f8-2ff(3ff::)
IRQConfig=S:3
[c2a] ; COM2, any IRQ
ConfigPriority=HARDRECONFIG
IOConfig=2f8-2ff(3ff::)
IRQConfig=S:3,4,5,7,9,10,11,12,14,15
[c34] ; COM3, IRQ4
ConfigPriority=HARDRECONFIG
IOConfig=3e8-3ef(3ff::)
IRQConfig=S:4
[c3a] ; COM3, any IRQ
ConfigPriority=HARDRECONFIG
IOConfig=3e8-3ef(3ff::)
IRQConfig=S:3,4,5,7,9,10,11,12,14,15
[c43] ; COM4, IRQ3
ConfigPriority=HARDRECONFIG
IOConfig=2e8-2ef(3ff::)
IRQConfig=S:3,5
[c4a] ; COM4, any IRQ
ConfigPriority=HARDRECONFIG
IOConfig=2e8-2ef(3ff::)
IRQConfig=S:3,4,5,7,9,10,11,12,14,15
[caa] ; Any base, any IRQ
ConfigPriority=HARDRECONFIG
IOConfig=8@100-ffff%fff8(3ff::)
IRQConfig=S:3,4,5,7,9,10,11,12,14,15
[DevMap.AddReg]
HKLM,hardware\devicemap\serialcomm,COM1,,COM1
HKLM,hardware\devicemap\serialcomm,COM2,,COM2
;----------------------------------------------------------
[Strings]
MfgName="Generic"
PortsClassName = "Ports (COM & LPT)"
PCMCOM.DeviceDesc="PCMCIA SERIAL card"
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.