**************************************************************************** Revision No. : 3.12 Release Date : 07/0?/02 Reference below for check modified ***************************************************************************** 07/26/02 BOB BIOS 3.12 is the combination of the changes implemented in BIOS 3.10 and 3.11. **************************************************************************** Revision No. : 3.11 Release Date : 06/04/02 Reference below for check modified ***************************************************************************** BIOS.CFG (R36) OEMPOST.ASM (R08) 06/04/02 JEF Set Fan_Divisor to 16 and set SYSTEM Fan speed check at 800 RPM. **************************************************************************** Revision No. : 3.10 Release Date : 05/10/02 Reference below for check modified ***************************************************************************** BIOS.CFG (R35) CHIPBOOT.ASM (OEM04B) 05/10/02 JEF Always set N.B. offset 6ch to 04h and 6dh to 0c5h when 4 banks. CHIPBOOT.ASM <-- only for test BIOS OEM04A 05/09/02 JEF We need set N.B. offset 6ch to 04h when Micron DDR pluged. BIOS.CFG <-- only for test BIOS (R34) CHIPBOOT.ASM (OEM04) 04/25/02 JEF Added define "Patch_Micron_DDR_4Bank" for patch Micron DDR only when 4 banks. (Only for test BIOS) **************************************************************************** Revision No. : 3.09 (include 3.07,3.08 solution) Release Date : 03/27/02 Reference below for check modified ***************************************************************************** BIOS.CFG (R33) SMI_CHIP.ASM (OEM07) SUPERIO.RUN (OEM01) 03/27/02 JEF 1.Fixed PowerFail function fail when set "Power On". 2.Turn superio GPO33 Low when enter S3 mode. **************************************************************************** Revision No. : 3.08 Release Date : 03/21/02 Reference below for check modified ***************************************************************************** BIOS.CFG <---Only for 3.08 not for 3.07 (R32) MOUSE.ASM (OEM01) 03/21/02 JEF Add define "No_Clear_ACPI_PS2_Flag_Before_USB". Fixed Special media key of HP keyboard can't work.When plug USB mouse but no PS2 mouse. Base on 3.06 not 3.07 **************************************************************************** Revision No. : 3.07 Release Date : 03/21/02 Reference below for check modified ***************************************************************************** BIOS.CFG <----Only for 3.07 not for 3.08 (R31) DSDT.ASX (OEM07) SMI_CHIP.ASM (OEM06) HDINSTAL.ASM (OEM01) 03/21/02 JEF Open IDE DMA when resume from S4. AHDSK.ASM (R82A) 03/12/02 JKS Fixed IDE_DMA_TRANSFER cannot work properly issue when the hdd is LARGE access mode. AHDSK.ASM (R82) 01/04/02 JKS Fixed IDE_DMA_TRANSFER cannot work issue when write data if it need to transfer 7Fh sectors and the offset of "address of transfer buffer" is not 0. **************************************************************************** Revision No. : 3.06 Release Date : 02/08/02 Reference below for check modified ***************************************************************************** PCICHIP.ASM (R06A) 02/08/02 RAX Remove R06 for fixed it will cause MDP require(S3 resume time) failed (1/5). BIOS.CFG (R30) OEMPOST.ASM (R07) 02/06/02 JEF Patch CT5880 S4 resume too late. CLOCK.GEN (OEM02) 02/06/02 JEF Disabled CT5880 if any sound card been pluged. SECURITY.ASM (R24) 12/21/01 ARV Fixed show error mssage fail in setup. **************************************************************************** Revision No. : 3.05 Release Date : 01/28/02 Reference below for check modified ***************************************************************************** PCICHIP.ASM (R06) 01/22/02 JKY Fixed VUEGO 18X CDROM plgh on Secondary IDE channel, and disable Onchip IDE channel1, hangup POST_137S. BIOS.CFG (R29) 01/21/02 JEF Enabled Superio GPO 33,34 for MSI request. BIOS.CFG (R28) 01/18/02 JEF Added code to support (Y/N) confirm string in setup menu selectable especially for multi-language. BIOS.CFG (R07A) 01/17/02 JEF Fixed F10 Key can't work. BIOS.CFG (R27) CHIPBOOT.ASM (OEM02B) 01/11/02 JEF Use define for Micron_DRR_Driving_Setting. **************************************************************************** Revision No. : 3.04 Release Date : 01/10/02 Reference below for check modified ***************************************************************************** SETUP.CFG (R08A) 01/10/02 JEF Set suspend mode default to S3. BBSFUNC.ASM (OEM01) BFEATURE.ASM (OEM02) 12/28/01 JEF Fixed "Removable" string spell error. BIOS.CFG (R26) CHIPBOOT.ASM (OEM03) CFEATURE.ASM (OEM01) 12/26/01 JEF Added define "Always_Set_Dram_By_SPD" for always set Dram timing by SPD even when CMOS checksum fail. **************************************************************************** Revision No. : 3.03 Release Date : 12/20/01 Reference below for check modified ***************************************************************************** OEMPOST.ASM (R06) 12/20/01 JEF Fixed HP Copyright report error (2000 to 2001). BIOS.CFG (R25) 12/20/01 JEF Show BIOS version to DMI. SETUP.CFG (R10) 12/19/01 JEF Fixed no show removeable group items. SMI_CHIP.ASM (OEM04C) 12/19/01 JEF Fixed USB Device will auto Enumerate After Resume from S1 mode,because we can't enable USB event in S1 Mode. SETUP.CFG (R09) 12/17/01 JEF Set USB legacy KB/MS support default to enabled. DSDT.ASX (OEM05) 12/17/01 JEF Not Report USB2 because USB2 was disabled. BIOS.CFG (R24) DSDT.ASX (OEM06) 12/17/01 JEF Auto Replace USB _PRW when S3 mode enabled or not. BIOS.CFG (R23) 12/17/01 JEF Added HDD 48bits support. DSDT.ASX (OEM04) CHIPSET.EQU (OEM01) 12/15/01 JEF Fixed S3 resume too slow. Problem: Enter S4 -> system wakeup -> entry S3 -> wakeup . Due to OS flag destroy,BIOS can't used the OS flag to skip VGA ROM init. **************************************************************************** Revision No. : 3.02 Release Date : 12/14/01 Reference below for check modified ***************************************************************************** SMI_CHIP.ASM (OEM04B) 12/14/01 JEF Fixed USB still can wakeup system From D5 mode. SETUP.CFG (R08) 12/14/01 JEF Set suspend mode default to S1. CHIPBOOT.ASM (OEM02A) 12/14/01 JEF Delete OEM02.DDR Driving setting. BIOS.CFG (R22) 12/13/01 JEF Fixed RTC will be modified if plug and play Power core many times. **************************************************************************** Revision No. : 3.01 Release Date : 12/12/01 Reference below for check modified ***************************************************************************** BIOS.CFG (R21) AFLASH.ASM (OEM01) CHIPPOST.ASM (OEM01) 12/12/01 JEF Disable USB2 Host for speed up S3 resume and POST time. CHIPBOOT.ASM (OEM02) 12/06/01 JEF Follow HP request to adjust DDR driving. **************************************************************************** Revision No. : 3.00 Release Date : 12/05/01 Initial release *****************************************************************************Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.