************************************************************************ ************************************************************************ README FILE for HEWLETT-PACKARD'S LASERJET 6P/6MP PRINTING SOFTWARE for Use With MICROSOFT WINDOWS 3.1 and 3.11 WINDOWS FOR WORKGROUPS 3.1 and 3.11 WINDOWS 95: The LJREADME contains late information found too late to provide in official documentation or README files. ************************************************************************ Printers Supported, Component Version Numbers, System Requirements ************************************************************************ The LJREADME provides information for "HP LaserJet 6P/6MP Printing System" as available in-box, from HP electronic services, and from HP driver distribution centers: Components: Version Numbers: ----------------------------------- ----------------------------- HP LaserJet 6P/6MP Printing System: 1.00 HP LaserJet 6p/6MP Installer: 1.00 HPPCL5G Printer Driver: G1.30 HPBXLA Printer Driver: 1.20 Windows 3.1x PostScript Driver: 3.0.1 Windows 95 PostScript Driver: 4.1 HP Font Installer: 2.10 HP Status Window: 3.25.0.3 HP toolbox for Windows 95 2.32 HP LaserJet utility for Windows 3.1x HP FontSmart Font Management Software: 1.64 HP LaserJet deinstaller 1.00 System Requirements for Printing System (Minimum): - Windows 3.1x - 386 processor or greater - 2MB RAM - Disk space - see the Custom installation screen for requirements More information on printing system issues and how to obtain software not covered in this LJREADME can be found in the HP LaserJet 6P PCL Printing System README file, HP LaserJet 6MP Printing System PostScript README file, the driver help files, and your user's manual. ************************************************************************ ************************************************************************ Files do not install during the installation -------------------------------------------- Before installing the HP LaserJet 6P/6MP Printing System, close all applications and TSR (Terminate and Stay Resident) programs that load at startup (in Windows or DOS) such as virus checkers, fax utilities, etc., and all other applications that may be open. Also close all shell utilities such as: Microsoft Office Manager, Norton Desktop, Dashboard, etc. Lastly, exit any previous version of HP Status Window that may be running. Document does not print correctly --------------------------------- Several things can cause a document to not print correctly; not enough memory in the printer to handle the document being printed, incorrect behavior by applications, Windows or printer drivers, or incorrect settings in the printer drivers. If using the HP LaserJet 6P/6MP - Standard printer driver, try printing in either HP-GL/2 or Raster modes or changing resolutions from 600 to 300. These modes can be selected in the printer setup dialog under the Print Quality sheet. If neither of these modes fixes the problem try using the HP LaserJet 6P/6MP - Enhanced printer driver. If the problem occurs while printing with the HP LaserJet 6P/6MP - Enhanced printer driver, try using the HP LaserJet 6P/6MP - Standard printer driver. HP JetAdmin Users ----------------- Users of the HP network printer support utility, HP JetAdmin, must use version 2.32 with the HP LaserJet 6P/6MP printer. HP JetAdmin 2.32 is available through HP Software Distribution Services. HP JetAdmin 2.32 is included with printers that are shipped with the CD-ROM software package. General ------- The user cannot print to a HP LaserJet 6P/6MP printer with drivers other than the supplied HP LaserJet 6P/6MP printer drivers. SIMM Slot Identification ------------------------- The Self Test printout configuration page incorrectly reports the SIMM slot number. Physical slot #1 is reported as slot #3 and visa versa. Standard Driver --------------- Nothing Enhanced Driver --------------- When using the N-up feature, bitmap fonts are not scaled. The only workaround is to change the font to a TrueType font and make sure the option TrueType as Bitmaps is NOT checked. When Manual Feed is used with a custom paper, there is not a pause before the printer pulls the paper. The user should verify they have the correct paper in Tray 1 before printing on custom media. When using the N-up feature, the user should keep in mind that the first page of each physical page determines the orientation. For example, if there is a 5-page document that is being printed 4 pages per sheet and the first page is Landscape, the second and third are Portrait, the fourth Landscape and the fifth is Portrait, when printed four pages per sheet, the first sheet will be Landscape and the second will be Portrait. When using the N-up feature, the user should keep in mind that the first page of the job each physical page determines the page size of the entire job. For example, if there is a three page document that is being printed two pages per sheet and the first page is 5x7, the second is letter, and the third is 6x6, when printed two pages per sheet, all will print on 5x7. the first sheet will be 5x7 and the second sheet will be 6x6. When using the Fit-to-Page feature, the user should be aware that the page will be scaled until one direction is at a maximum size. When printing FontSmart fonts and an error occurs, when the user hits the GO button, they will receive an XL error page that reports "TEXT, Insufficient Memory". The workaround is to print the fonts using the Standard driver. PostScript Driver ----------------- When printing certain fonts from within FontSmart, for example Garamond and Bodini, the user will receive a PostScript error page reporting that the job requires more memory. The user could use the Standard driver to print these fonts, but the fonts may look slightly different. Applets (HP toolbox (Win 95) and HP Utility (Win 3.x)) -------------------------------------------- On the Page Setup tab, the user cannot change Page Size and Form Lines at one time. If the user does this, Form Lines defaults to a certain value according to the Page Size. The user must change Page Size, click OK, reopen the Applet, change Form Lines, and click OK in order for their value to stick for Form Lines. On the Resources tab, the user cannot change Resource Savings to ON and set Resource Savings Size at one time. If the user does this, the value they set for Resource Savings Size does not stick. The user must change Resource Savings to ON, click OK, reopen the Applet, change Resource Savings Size, and click OK in order for their value to stick for Resource Savings Size. Status Window (Win 3.x only) ---------------------------- The Status Window reports Check Cover/Toner not only when there is a problem with the cover or toner, but also when there is a Paper Jam. The user can look at the Control Panel message provided in the Utility for an accurate error message. Installer --------- Win 3.x only - If the user does an English installation over a localized installation, or a localized installation over a different localized installation, a GPF will occur at the end of the installation. The workaround is to do the installation again. It works the second time. PostScript Installer only - If the user installs the 6MP over the 5MP, they will get the Adobe PostScript error "PS_ENUM version incompatible with adobeps". The only way to get the 6MP PostScript driver in this situation is to delete all the 5MP PostScript driver files.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.