======----- Intel Brookdale/ICH2 -----======
DANxx..-... ---> DANUBE
11/22/01, DAN3.02
1. Fixed PS Fan failed to function. In 3.00 BIOS, PS fan wakeup signal was neglected to be sent upon power-up. PS fan will still turn on eventually due to PS overheat protection mechanism. However, for reliability reasons, we don't want to rely on that. In 3.02 BIOS, PS fan is turned on upon power-up.
2. Changed PS2 MS wakeup event in S3 from any movement to button click.
3. Integrated with Intel memory reference code 2.0.
4. Updated Northwood CPU B0 stepping u-code.
5. Changed DDR266 string to PC2100 and DDR200 string to PC1600.
11/20/01, DAN3.01A
1. Changed PS2 MS wakeup event in S3 from any movement to button click.
11/19/01, DAN3.01
1. Integrated with Intel memory reference code 2.0.
2. Updated Northwood CPU B0 stepping u-code.
3. Changed DDR266 string to PC2100 and DDR200 string to PC1600.
/*** Release DAN0.07 as DAN3.00(checksum:A695) for release candidate ***/
11/02/01, DAN0.07
1. Changed Fan control setting for different CPU type:
a. For Willamette CPU:
Fan High/Low Temp: 66/58 degree C
Fan High voltage CPU/System: 11.0V/11.5V
Fan Low Voltage CPU/System : 7.5V/8.0V
b. For Northwood CPU:
Fan High/Low Temp: 59/51 degree C
Fan High voltage CPU/System: 11.0V/11.5V
Fan Low Voltage CPU/System : 7.5V/8.0V
2. Changed "Fan High Temp" and "Fan Low Temp" item to show only.
10/31/01, DAN0.06
1. Support Intel FWH 82802AB and 82802AB8.
2. Support 48-bit LBA mode.
10/30/01, DAN0.05
1. Fixed Fan Control Items showed when <F1> key pressed.
2. Set CPU Fan low limit to 1500 RPM and System Fan low limit to 800 RPM.
3. Set default value for CPU FAN High/Low Voltage to 10.5V/6.0V.
10/19/01, DAN0.04
1. Integrated with Intel memory reference code 1.3.
2. Removed 2E8/IRQ10 item option from COM1/COM2 items.
3. Fixed DRAM type doesn't correct in DMI TABLE.
4. Fixed FAN control function failed in Windows environment.
5. Reported maximum power state to 3 for PME event in ASL.
10/15/01, DAN0.03
1. Integrated with Intel memory reference code 1.2.
10/05/01, DAN0.02
1. Fixed FANs will stop when memory detect error.
2. Fixed primary channel detects 40/80 cable doesn't correct.
3. Disabled FAN filter to fix some type of FAN speed cannot be detected.
4. Changed System FAN control to CPU/System FAN control. And set default value
for CPU FAN High/Low Voltage to 11.5V/9V, and System FAN High/Low Voltage to
11.5V/7.5V.
5. Changed default value for FAN High Temp to 70 degrees, and FAN Low Temp to
60 degrees.
10/03/01, DAN0.01
1. Initial version based on AMAZON BIOS version 3.08.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.