; Billion BIPAC-702 AE ADSL(Annex-B PPPoE) PCI card driver for Windows NT
;
; Copyright (C) 2002 Billion Electric Co., Ltd.
[IntstallOptions]
Install_ADSL_702Mon = "YES"
Install_CommAgnt_PROT = "YES"
[Identification]
OptionType = NetAdapter
[PlatformsSupported]
PCI
[Options]
NicAdsl
[ProtocolChoicesNicAdsl]
Connect_0 = "RFC 1483 Bridged" , "RFC1483Bridged"
Connect_1 = "RFC 1483 Routed" , "RFC1483Routed"
[FileConstants]
InfName = "NicAdsl.INF"
UtilityInf = "UTILITY.INF"
subroutineinf = "SUBROUTN.INF"
SoftwareType = "driver"
Exit_Code = 0
NetEventDLL = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll"
Manufacturer = "Billion Electric Co., Ltd."
VendorID = 5010 ;VEN_1392
DeviceID = 2001 ;DEV_07D1
StartNetworkAddress = "00-60-F9-10-01-01"
ProductMajorVersion = "0"
ProductMinorVersion = "5"
ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion)
ProductSoftwareName = "NicAdsl_"
ProductSoftwareTitle = "BIPAC-702 AE ADSL PCI Driver"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\NicAdsl.sys"
NetRuleSoftwareType = "NicAdslSys ndisDriver NicAdslDriver"
NetRuleSoftwareUse = $(SoftwareType)
NetRuleSoftwareBindForm = """NicAdslSys"" yes no container"
NetRuleSoftwareClass = {"NicAdslDriver basic"}
NetRuleSoftwareSWBindable = {"NicAdslDriver NicAdslAdapter non exclusive 100"}
OptionHelpFile = "NicAdsl.hlp"
ProductHardwareName = "NicAdsl_"
ProductHardwareNicAdslTitle = "Billion BIPAC-702 AE ADSL PCI card"
NetRuleHardwareNicAdslType = "NicAdsl NicAdslAdapter"
NetRuleHardwareNicAdslClass = {"NicAdslAdapter basic"}
AdapterNicAdslType = 5 ;; PCI board
HelpNicAdslId = 30
NicAdslCFID = 2001 ;0x07d1
NetRuleHardwareBindForm = " yes yes container"
ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
[GeneralConstants]
from = ""
to = ""
ExitCodeOk = 0
ExitCodeCancel = 1
ExitCodeFatal = 2
KeyNull = ""
MAXIMUM_ALLOWED = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct = ""
KeyParameters = ""
TRUE = 1
FALSE = 0
NoTitle = 0
ExitState = "Active"
OldVersionExisted = $(FALSE)
DriverPath = $(!STF_NTPATH)\drivers
[date]
Now = {} ? $(!LIBHANDLE) GetSystemDate
[Identify]
read-syms Identification
set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
set Media = #("Source Media Descriptions", 1, 1)
Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
set Status = STATUS_FAILED
set OptionList = {}
set OptionTextList = {}
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
ifstr(i) $($1) == ""
goto returnoptions
endif
set PlatformList = ^(PlatformsSupported, 1)
Ifcontains(i) $($1) in $(PlatformList)
goto returnoptions
else
set Status = STATUS_NOTSUPPORTED
goto finish_ReturnOptions
endif
else
set Status = STATUS_NOLANGUAGE
goto finish_ReturnOptions
endif
returnoptions = +
set OptionList = ^(Options, 1)
set OptionTextList = ^(OptionsText$($0), 1)
set Status = STATUS_SUCCESSFUL
finish_ReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
set CurrLang = $($0)
set Option = $($1)
set SrcDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) NOT-IN $(LanguageList)
Return STATUS_NOLANGUAGE
endif
set-subst LF = "\n"
read-syms GeneralConstants
read-syms FileConstants
read-syms IntstallOptions
set NetRuleSoftwareBindable = $($R1)
read-syms DialogConstants$(!STF_LANGUAGE)
ifstr(i) $(!NTN_Origination) == "NCPA"
set Continue = "OK"
endif
read-syms FileConstants$(!STF_LANGUAGE)
detect date
set-title $(Function$(Option)Title)
set to = Begin
set from = Begin
set CommonStatus = STATUS_SUCCESSFUL
EndWait
Begin = +
Ifstr(i) $(!NTN_InstallMode) == deinstall
set StartLabel = removeadapter
else-Ifstr(i) $(!NTN_InstallMode) == Update
set StartLabel = UpgradeSoftware
else-Ifstr(i) $(!NTN_InstallMode) == bind
set StartLabel = bindingadapter
else-Ifstr(i) $(!NTN_InstallMode) == configure
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
set from = end
set to = end
goto nonfatalinfo
else
set StartLabel = configureadapter
endif
else
set StartLabel = installadapter
set OEM_ABANDON_OPTIONS = {}
set OEM_ABANDON_SOFTWARE = FALSE
set OEM_ABANDON_ON = TRUE
endif
set from = $(fatal)
set to = $(fatal)
goto $(StartLabel)
installadapter = +
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
CloseRegKey $(KeyProduct)
ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
$(ProductVersion)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
goto end
else
Shell $(UtilityInf), CardExistedDlg
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) != "OK"
set CommonStatus = STATUS_USERCANCEL
goto end
endif
set OldVersionExisted = $(TRUE)
endif
Endif
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
Goto adapteroptions
configureadapter = +
Ifstr(i) $(KeyProduct) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) == $(KeyNull)
Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Goto fatalregistry
Endif
Endif
Shell $(UtilityInf) FindService, $(KeyProduct)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Endif
Ifstr(i) $($R0) != NO_ERROR
Goto fatalregistry
endif
set KeyParameters = $($R2)
CloseRegKey $($R1)
Ifstr $(KeyParameters) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
goto fatalregistry
endif
set OldVersionExisted = $(TRUE)
set ValueName = ""
set ValueData = ""
set ValueStr = ""
set ValueList = {}
EnumRegValue $(KeyParameters) ValueList
ForListDo $(ValueList)
set ValueItem = $($)
set ValueName = *($(ValueItem),1)
set ValueData = *($(ValueItem),4)
Ifstr(i) $(ValueName) == "Protocol"
set ProtocolIndex = $(ValueData)
endif
EndForListDo
set ProtocolValue = *($(ProtocolList), ~($(ProtocolValues),$(ProtocolIndex)))
ifstr(i) $(ProtocolValue) == ""
set ProtocolValue = *($(ProtocolList), 1)
endif
adapteroptions = +
set from = adapteroptions
read-syms FileDependentDlg$(!STF_LANGUAGE)
SetHelpFile $(!STF_WINDOWSSYSPATH)"\"$(OptionHelpFile) $(MinHelpId) $(MaxHelpId) $(Help$(Option)Id)
;ui start "InputDlg"
;ifstr(i) $(DLGEVENT) == "CONTINUE"
; set ProtocolIndex = $(Combo1Out)
; ui pop 1
;else-ifstr(i) $(DLGEVENT) == "BACK"
; set CommonStatus = STATUS_USERCANCEL
; ui pop 1
; goto end
;else
; ui pop 1
; goto end
;endif
;set ProtocolValue = *($(ProtocolValues), ~($(ProtocolList),$(ProtocolIndex)))
set ProtocolValue = "RFC1483Bridged"
ifstr(i) $(!NTN_InstallMode) == configure
goto updateparameters
endif
installproduct =+
StartWait
;set DeviceID = $($(Option)CFID)
;Shell $(UtilityInf), GetPCIInformation, $(VendorID) $(DeviceID)
;ifint $($ShellCode) != $(!SHELL_CODE_OK)
; goto ShellCodeError
;endif
;ifstr(i) $($R0) == {}
; set Error = $(CANNOT_FIND_ANY_CARD)
; set CommonStatus = USER_CANCEL
; set from = end
; goto nonfatal
;endif
set AdapterList = $($R0)
ifint $(OldVersionExisted) == $(FALSE)
Ifstr(i) $(DoCopy) == "YES"
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
Endif
install "Install-Option"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
endif
Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), +
$(ProductSoftwareName), +
$(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
$(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
$(NetEventDLL)
Set OEM_ABANDON_SOFTWARE = TRUE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
CloseRegKey $($R4)
CloseRegKey $($R5)
goto fatalregistry
endif
Set SoftProductKey = $($R1)
Set SoftNetRuleKey = $($R2)
Set SoftServiceKey = $($R3)
Set SoftParameterKey = $($R4)
Set SoftLinkageKey = $($R5)
set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
{MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
{MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
{Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
CloseRegKey $(SoftProductKey)
CloseRegKey $(SoftNetRuleKey)
CloseRegKey $(SoftServiceKey)
CloseRegKey $(SoftParameterKey)
CloseRegKey $(SoftLinkageKey)
goto fatalregistry
endif
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
{bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareSWBindable)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
CloseRegKey $(SoftProductKey)
CloseRegKey $(SoftNetRuleKey)
CloseRegKey $(SoftServiceKey)
CloseRegKey $(SoftParameterKey)
CloseRegKey $(SoftLinkageKey)
Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
goto fatalregistry
endif
endif
ForListDo $(AdapterList)
set BusNum = *($($),1)
set DeviceNum = *($($),2)
set FunctionNum = *($($),3)
Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNum), +
$(DeviceNum), $(ProductHardware$(Option)Description), $(ProductHardwareName) "YES"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr $($R0) != "NO_ERROR"
set Error = $($R0)
goto fatal
endif
ifstr(i) $($R1) != "YES"
StartWait
Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
ifint $($R4) != -1
Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
endif
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
goto fatalregistry
endif
Set HardNetCardKey = $($R1)
Set HardNetRuleKey = $($R2)
Set HardParameterKey = $($R3)
set AdapterNumber = $($R4)
set AdapterServiceName = $($R5)
set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set BusTypeNum = 5
set NewValueList = {{AdapterType,$(NoTitle),$(!REG_VT_DWORD),$(Adapter$(Option)Type)},+
{MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
{MemoryAddress,$(NoTitle),$(!REG_VT_DWORD),0},+
{MemoryData,$(NoTitle),$(!REG_VT_DWORD),0},+
{DMTTime,$(NoTitle),$(!REG_VT_DWORD),100},+
{Modem,$(NoTitle),$(!REG_VT_DWORD),1},+
{UNH,$(NoTitle),$(!REG_VT_DWORD),0},+
{Decode,$(NoTitle),$(!REG_VT_DWORD),0},+
{PVC_VCI,$(NoTitle),$(!REG_VT_DWORD),32},+
{PVC_VPI,$(NoTitle),$(!REG_VT_DWORD),1},+
{Dlgflag,$(NoTitle),$(!REG_VT_DWORD),1},+
{LineType,$(NoTitle),$(!REG_VT_DWORD),1},+
{BusNumber,$(NoTitle),$(!REG_VT_DWORD),0},+
{RxFifoLevel,$(NoTitle),$(!REG_VT_DWORD),12},+
{IDMABoot,$(NoTitle),$(!REG_VT_DWORD),0},+
{FileName,$(NoTitle),$(!REG_VT_SZ),"rtbld#.bnm"},+
{PrintTime,$(NoTitle),$(!REG_VT_DWORD),1000},+
{Show,$(NoTitle),$(!REG_VT_DWORD),1},+
{DebugFlag,$(NoTitle),$(!REG_VT_DWORD),0},+
{PCICard,$(NoTitle),$(!REG_VT_DWORD),0},+
{DebugLevel,$(NoTitle),$(!REG_VT_DWORD),0},+
{DebugFlags,$(NoTitle),$(!REG_VT_DWORD),0},+
{WinVer,$(NoTitle),$(!REG_VT_DWORD),0},+
{MaxPacketSize,$(NoTitle),$(!REG_VT_DWORD),65535},+
{Protocol,$(NoTitle),$(!REG_VT_DWORD),0},+
{Encap,$(NoTitle),$(!REG_VT_DWORD),0},+
{TXFF03,$(NoTitle),$(!REG_VT_DWORD),0},+
{RXFF03,$(NoTitle),$(!REG_VT_DWORD),0},+
{TxLinkSize,$(NoTitle),$(!REG_VT_DWORD),50},+
{RxLinkSize,$(NoTitle),$(!REG_VT_DWORD),100},+
{RxLinkBufferSize,$(NoTitle),$(!REG_VT_DWORD),1680},+
{GFC,$(NoTitle),$(!REG_VT_DWORD),0},+
{CLP,$(NoTitle),$(!REG_VT_DWORD),0},+
{PTI,$(NoTitle),$(!REG_VT_DWORD),0},+
{DMTDownRate,$(NoTitle),$(!REG_VT_DWORD),511},+
{DMTUpRate,$(NoTitle),$(!REG_VT_DWORD),255},+
{CNTL0,$(NoTitle),$(!REG_VT_DWORD),66},+
{IDMABoot,$(NoTitle),$(!REG_VT_DWORD),1},+
{ADPT0,$(NoTitle),$(!REG_VT_DWORD),0},+
{ADPT1,$(NoTitle),$(!REG_VT_DWORD),0},+
{ADPT2,$(NoTitle),$(!REG_VT_DWORD),0},+
{OPTN0,$(NoTitle),$(!REG_VT_DWORD),2147614822},+
{OPTN2,$(NoTitle),$(!REG_VT_DWORD),593494016},+
{OPTN3,$(NoTitle),$(!REG_VT_DWORD),38},+
{OPTN4,$(NoTitle),$(!REG_VT_DWORD),0},+
{OPTN5,$(NoTitle),$(!REG_VT_DWORD),1280},+
{PFCL1,$(NoTitle),$(!REG_VT_DWORD),6},+
{ISDN,$(NoTitle),$(!REG_VT_DWORD),0},+
{msp930,$(NoTitle),$(!REG_VT_DWORD),0},+
{BMODE,$(NoTitle),$(!REG_VT_DWORD),0},+
{NetworkAddress,$(NoTitle),$(!REG_VT_SZ),$(StartNetworkAddress)},+
{BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)}}
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),$(ProtocolValue)}}
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardware$(Option)Type)},+
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardware$(Option)Class)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(HardNetCardKey)
CloseRegKey $(HardNetRuleKey)
set NewValueList = {{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+
{SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(DeviceNum)},+
{FunctionNumber,$(NoTitle),$(!REG_VT_DWORD),$(FunctionNum)}}
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
CloseRegKey $(HardParameterKey)
ifstr $(Install_CommAgnt_PROT) == "YES"
install "Install-CommAgnt"
Shell $(!STF_WINDOWSPATH)\inf\commagnt.inf, InstallOption, $(CurrLang),+
"CommAgnt" ,$(SrcDir), YES, YES, YES, NO
endif
ifstr $(Install_ADSL_702Mon) == "YES"
install "Install-702Mon"
CreateRegKey $(!REG_H_LOCAL) {"Software\Billion_Electric\BIPAC-702_AE",0,GenericClass} "" $(MAXIMUM_ALLOWED) "" KeyFlag
OpenRegKey $(!REG_H_LOCAL) "" "Software\Billion_Electric\BIPAC-702_AE" +
$(MAXIMUM_ALLOWED) KeyFlag
SetRegValue $(KeyFlag) {NDISWAN,$(NoTitle),$(!REG_VT_DWORD),0}
CloseRegKey $(KeyFlag)
RunProgram ExitCode "Billion BIPAC-702 AE ADSL PCI card" "" "RUNDLL32.EXE" "702AEx32.dll,AddADSLxShellProc"
endif
EndWait
endif
TermProcess =+
EndForListDo
EndWait
goto successful
updateparameters =+
set HardParameterKey = $($R3)
set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),$(ProtocolValue)}}
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(KeyParameters)
goto successful
bindingadapter =+
set Error = "Binding: Sorry, not yet implemented."
goto fatal
removeadapter = +
ifstr $(Install_CommAgnt_PROT) == "YES"
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\CommAgnt" $(!REG_KEY_READ) KeyCommAgnt
ifstr $(KeyCommAgnt) != ""
Shell $(!STF_WINDOWSPATH)\inf\commagnt.inf, InstallOption, $(CurrLang),"CommAgnt" ,$(SrcDir), YES, YES, YES, -inf
CloseRegKey $(KeyCommAgnt)
endif
endif
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
else
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $(!NTN_RegBase)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
RunProgram ExitCode "Billion BIPAC-702 AE ADSL PCI card" "" "RUNDLL32.EXE" "702AEx32.dll,RemoveADSLxShellProc"
goto end
UpgradeSoftware = +
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set !UG_Filename = $($R0)
install "Install-Update"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
goto fatal
endif
SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
CloseRegKey $(KeyProduct)
ifstr $(Install_CommAgnt_PROT) == "YES"
Shell "", DiagRegistry
install "Install-CommAgnt"
endif
ifstr $(Install_ADSL_Mon) == "YES"
CreateRegKey $(!REG_H_LOCAL) {"Software\Billion_Electric\BIPAC-702_AE",0,GenericClass} "" $(MAXIMUM_ALLOWED) "" KeyFlag
OpenRegKey $(!REG_H_LOCAL) "" "Software\Billion_Electric\BIPAC-702_AE" +
$(MAXIMUM_ALLOWED) KeyFlag
SetRegValue $(KeyFlag) {NDISWAN,$(NoTitle),$(!REG_VT_DWORD),0}
CloseRegKey $(KeyFlag)
RunProgram ExitCode "Billion BIPAC-702 AE ADSL PCI card" "" "RUNDLL32.EXE" "702AEx32.dll,AddADSLxShellProc"
endif
else
goto fatalregistry
endif
goto end
successful = +
goto end
abandon = +
ForListDo $(OEM_ABANDON_OPTIONS)
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $($)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
EndForListDo
Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), FALSE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
goto end
warning = +
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(to)
else-ifstr(i) $($R1) == "CANCEL"
goto $(from)
else
goto "end"
endif
nonfatalinfo = +
Set CommonStatus = STATUS_USERCANCEL
Set Severity = STATUS
goto nonfatalmsg
nonfatal = +
Set Severity = NONFATAL
goto nonfatalmsg
nonfatalmsg = +
ifstr(i) $(Error) == ""
Set Severity = NONFATAL
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(from)
else
goto "end"
endif
fatalregistry = +
Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
fatal = +
ifstr(i) $(Error) == ""
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
goto setfailed
ShellCodeError = +
set DlgType = "MessageBox"
set STF_MB_TITLE = $(ShellCodeErrorTitle)
set STF_MB_TEXT = $(ShellCodeErrorText)
set STF_MB_TYPE = 1
set STF_MB_ICON = 3
set STF_MB_DEF = 1
ui start "Error Message"
goto setfailed
setfailed = +
set CommonStatus = STATUS_FAILED
ifstr(i) $(OEM_ABANDON_ON) == TRUE
set OEM_ABANDON_ON = FALSE
goto abandon
endif
goto end
end = +
goto term
term = +
Return $(CommonStatus)
[Install-Option]
set STF_VITAL = ""
ifstr(i) $(AddCopy) == "YES"
AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
endif
ifstr(i) $(DoCopy) == "YES"
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
endif
Exit
[Install-CommAgnt]
set STF_VITAL = ""
AddSectionFilesToCopyList Files-CommAgntInf $(SrcDir) $(!STF_WINDOWSPATH)\inf
AddSectionFilesToCopyList Files-CommAgntSys $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
Exit
[Install-702Mon]
set STF_VITAL = ""
AddSectionFilesToCopyList Files-702Mon$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
Exit
[Install-Hlp]
set STF_VITAL = ""
AddSectionFilesToCopyList Files-Hlp $(SrcDir) $(!STF_WINDOWSSYSPATH)
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
Exit
[Install-Update]
set STF_VITAL = ""
set STF_OVERWRITE = "VERIFYSOURCEOLDER"
AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
ifstr $(Install_CommAgnt_PROT) == "YES"
AddSectionFilesToCopyList Files-CommAgntInf $(SrcDir) $(!STF_WINDOWSPATH)\inf
AddSectionFilesToCopyList Files-CommAgntSys $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
endif
ifstr $(Install_ADSL_702Mon) == "YES"
AddSectionFilesToCopyList Files-702Mon$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)
endif
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
exit
[Source Media Descriptions]
1 = "Windows NT PPPoE Setup Disk"
[ProductType]
STF_PRODUCT = Winnt
STF_PLATFORM = I386
[Files-Inf]
1, OEMSETUP.INF, SIZE=1000, RENAME=$(!UG_Filename)
[Files-Hlp]
1,NicAdsl.hlp , SIZE=88888
[Files-NicAdsl]
1,NicAdsl.SYS , SIZE=88888
1,rtbld0.bnm, SIZE=88888
1,rtbld1.bnm, SIZE=88888
1,rtbld2.bnm, SIZE=88888
1,rtbld3.bnm, SIZE=88888
1,rtbld4.bnm, SIZE=88888
[Files-CommAgntInf]
1,commagnt.inf, SIZE=17000, OVERWRITE=ALWAYS
[Files-CommAgntSys]
1,CommAgnt.sys, SIZE=10000, OVERWRITE=ALWAYS
[Files-702MonNicAdsl]
1,702AEx32.DLL , SIZE=50000, OVERWRITE=ALWAYS
1,702MonEx.EXE , SIZE=240000, OVERWRITE=ALWAYS
1,Un702AE.EXE , SIZE=220000, OVERWRITE=ALWAYS
[LanguagesSupported]
ENG
[OptionsTextENG]
NicAdsl = "Billion BIPAC-702 AE ADSL PCI card"
[FileConstantsENG]
ProCaption = "Windows NT Setup"
ProCancel = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed. "+
"Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
ProductSoftwareDescription = "BIPAC-702 AE ADSL PCI Driver"
FunctionNicAdslTitle = "Billion BIPAC-702 AE ADSL PCI card Setup"
ProductHardwareNicAdslDescription = "Billion BIPAC-702 AE ADSL PCI card"
ProtocolList = ^(ProtocolChoices$(Option), 1)
ProtocolValues = ^(ProtocolChoices$(Option), 2)
NoList = ^(NoChoices, 1)
NoValues = ^(NoChoices, 2)
ShellCodeErrorTitle = "Error: "$(Function$(Option)Title)
ShellCodeErrorText = "Shell Code Error."
CANNOT_FIND_ANY_CARD = "Network card is not present in the system"
[DialogConstantsENG]
Help = "&Help"
Exit = "Cancel"
OK = "OK"
HelpContext = ""
Continue = "Continue"
Cancel = "Cancel"
[FileDependentDlgENG]
Combo1Label = "&Protocol:"
Combo1List = $(ProtocolList)
Combo1Out = $(ProtocolValue)
ComboListItemsIn = {Combo1List}
ComboListItemsOut = {Combo1Out}
DlgTemplate = "ADAP_PROTO_COMBO"
DlgType = "Combination"
Caption = $(Function$(Option)Title)
EditTextLim = ""
CBOptionsGreyed = {}
MinHelpId = 10
MaxHelpId = 1050
HelpContext = $(Help$(Option)Id)
[Proc_STF]
!STF_PROCESSOR = "" ? $(!LIBHANDLE) GetProcessor
!STF_WINDOWSPATH = "" ? $(!LIBHANDLE) GetWindowsNtDir
!STF_WINDOWSSYSPATH = "" ? $(!LIBHANDLE) GetWindowsNtSysDir
!STF_WINDOWSVERSION = "" ? $(!LIBHANDLE) GetWindowsNtVersion
!STF_COMPUTERNAME = "" ? $(!LIBHANDLE) GetMyComputerName
!STF_USERNAME = "" ? $(!LIBHANDLE) GetMyUserName
!STF_FLOPPYLIST = {} ? $(!LIBHANDLE) GetFloppyDriveLetters
!STF_UNUSEDDRIVES = {} ? $(!LIBHANDLE) GetUnusedDrives
!STF_BUSTYPE = "" ? $(!LIBHANDLE) GetMyBusType
!STF_BUSTYPELIST = "" ? $(!LIBHANDLE) GetMyBusTypeList
!STF_LANGUAGE = "" ? $(!LIBHANDLE) GetLanguage
!STF_IS_UP_SYSTEM = "" ? $(!LIBHANDLE) IsUniprocessorSystem
[Proc_Const]
Titl = "ADSL Card Setup Commands Version 1.0"
Lang = "ENG"
!NTN_InstallMode = "install"
!STF_IDW = "FALSE"
!STF_PLATFORM = "I386"
!NTN_ServiceBase = "SYSTEM\CurrentControlSet\Services"
!NTN_SoftwareBase = "SOFTWARE"
!NTN_Origination = "ncpa"
!NTN_InstallPhase = "secondary"
OOptionList = $(NicAdsl)
OOptionTextList = $(NicAdsl)
OOptionTypeText = "Network Adapter"
[Shell Commands]
StartWait
read-syms OptionsTextENG
read-syms Proc_Const
set-title $(Titl)
set !LIBHANDLE = ""
set !NCPA_HANDLE = ""
;OpenRegKey $(!REG_H_CUSER) "" "Control Panel\International" $(!REG_KEY_READ) KeyLang
;ifstr $(KeyLang) != ""
; GetRegValue $(KeyLang) "Locale" LangInf
; ifint $(RegLastError) == $(!REG_ERROR_SUCCESS)
; ifcontains *($(LangInf),4) in {00000407}
; set Lang = "GER"
; else
; set Lang = "ENG"
; endif
; endif
; CloseRegKey $(KeyLang)
;endif
read-syms DialogConstants$(Lang)
Split-String $(STF_CONTEXTINFNAME) "\" TmpInfName
QueryListSize ListSz $(TmpInfName)
set-sub ListSz = $(ListSz),1
set !STF_SRCDIR = ""
Loop_SetSrcDir = +
ifint $(ListSz) > 0
ifstr $(!STF_SRCDIR) == ""
ifstr *($(TmpInfName),$(ListSz)) != "\"
set !STF_SRCDIR = *($(TmpInfName),$(ListSz))"\"
endif
else
set !STF_SRCDIR = *($(TmpInfName),$(ListSz))$(!STF_SRCDIR)
endif
set-sub ListSz = $(ListSz),1
goto Loop_SetSrcDir
endif
set !STF_SRCDIR_KEYED = $(!STF_SRCDIR)
set !STF_SRCDIR_USED = $(!STF_SRCDIR)
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows NT\CurrentVersion" $(!REG_KEY_READ) HCurVer
ifstr $(HCurVer) == ""
goto PreEnd
endif
GetRegValue $(HCurVer) "SystemRoot" HSysRot
ifint $(RegLastError) != $(!REG_ERROR_SUCCESS)
CloseRegKey $(HCurVer)
goto PreEnd
endif
CloseRegKey $(HCurVer)
set !STF_CWDDIR = *($(HSysRot),4)"\system32\"
LoadLibrary "x" $(!STF_CWDDIR)"setupdll.dll" !LIBHANDLE
LoadLibrary "x" $(!STF_CWDDIR)"ncpa.cpl" !NCPA_HANDLE
read-syms Proc_STF
detect Proc_STF
set !STF_NTPATH = $(!STF_WINDOWSSYSPATH)
GetDriveInPath !STF_NTDRIVE $(!STF_WINDOWSSYSPATH)
shell "" Identify $(!STF_LANGUAGE)
shell "" ReturnOptions $(!STF_LANGUAGE)
shell "other.inf" DoSingleOption $(OemOptionList) $(OOptionTextList) $(OOptionTypeText) ""
ifstr(i) $($R0) == STATUS_USERCANCEL
goto PreEnd
else-ifstr(i) $($R0) != STATUS_SUCCESSFUL
goto PreEnd
endif
Read-Syms GeneralConstants
Read-Syms FileConstants
set order = "0"
loop1 = +
set TmpInf = $(!STF_WINDOWSSYSPATH)"\oemnad"$(order)".inf"
LibraryProcedure RetValue,$(!LIBHANDLE),CheckFileExistance $(TmpInf)
ifstr(i) $(RetValue) != YES
goto loopend
endif
set-add order = $(order),1
ifint $(order) < 100
goto loop1
else
goto PreEnd
endif
loopend = +
LibraryProcedure RetValue,$(!LIBHANDLE),CopySingleFile $(STF_CONTEXTINFNAME) $(TmpInf)
set !STF_SRCDIR_OVERRIDE = $(!STF_SRCDIR)
set !NTN_Infname = $(TmpInf)
set !NTN_InfOption = "NicAdsl"
set !NTN_InfSection = "InstallOption"
shell $(!NTN_Infname) $(!NTN_InfSection) $(!STF_LANGUAGE) $(!NTN_InfOption) $(!STF_CWDDIR) YES YES YES
set !STF_INSTALL_MODE = "EXPRESS"
set !STF_PRODUCT = "WINNT"
LibraryProcedure XResult $(!NCPA_HANDLE),"CPlSetup" $(!STF_HWND),"NCPA",$(WN)
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Ncpa\CurrentVersion" 33554432 KeyHandle
OpenRegKey $(KeyHandle) "" "ConfigChanged" $(!REG_KEY_READ) KeyHandle1
ifstr(i) $(KeyHandle1) == ""
CreateRegKey $(KeyHandle) {"ConfigChanged",$(QN),GenericClass} "" $(OU) 1 KeyHandle1
endif
CloseRegKey $(KeyHandle1)
CloseRegKey $(KeyHandle)
RunProgram ExitCode "" "" $(!STF_WINDOWSSYSPATH)"\control.exe" ncpa.cpl
PreEnd = +
set Exit_Code = 0
EndWait
ifstr $(!NCPA_HANDLE) != ""
FreeLibrary $(!NCPA_HANDLE)
endif
ifstr $(!LIBHANDLE) != ""
FreeLibrary $(!LIBHANDLE)
endif
exit
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.