NTREADME.TXT Driver File Contents (pcm_5820l.zip)

To install the NT driver:

o extract the driver on a diskette
o select <Control Panel>
o select <SCSI Adapters>
o select <Drivers>
o select <Add>
o select <Have Disk> and use the diskette you just made
o reboot the system

o upon reboot, confirm that our driver not atapi si running under 
  the SCSI Adapters path above.

The above will correctly install our UDMA driver.  However you will
continue to get error msgs in the event log due to the old MS atapi
driver continuing to try and run.  It won't hurt anything, but it looks
bad and the warning msgs on boot are annoying.  So do the following
AFTER our driver is installed correctly to eliminate these msgs:

o Go into Control Panel
o Go into Devices
o Select Atapi
o Pick Startup
o Select Disabled startup type
o OK your way out  
o (it's ok that you disable this AS LONG AS you are now booting our
   driver.  Don't do this if you are not...)
o reboot.
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 0.56