1. Echo_304.exe Driver
2. RelNotes.TXT File Contents

RelNotes.TXT Driver File Contents (Echo_304.exe)

		======----- Intel Brookdale-G/ICH4 -----======

		ECHx.xxx  ---> ECHO


11/05/02, ECH3.04 (Checksum:5880)
1. Released ECHO version 3.04 BIOS from version 3.03E.

11/05/02, ECH3.03E
1. Fixed background color of Compaq logo to be changed to RED. 
2. Support new flash interface to WinFlash utility.

11/01/02, ECH3.03D
1. Changed the background color for the "<F1: Setup> <F10: System Recovery>" 
   and "Entering SETUP ..." to be blue for HP.
2. Changed the location of "Entering Setup¡K" to be at the bottom line.
3. Changed Fan fault value as 500 RPM for System fan and 600 RPM for CPU fan.
4. If CPU fan check is tattoo to "Enabled", setting the following values:
   CPU Fan Check           : Enabled
   System Fan Check        : Disabled 
   Fan High Temp           : Northwood : 59¢J
                             Willamette: 59¢J
   CPU Fan High Voltage    : 11.5v
   System Fan High Voltage : 11.5v
   Fan Low Temp            : Northwood : 51¢J
                             Willamette: 51¢J
   CPU Fan Low Voltage     : 5.5v
   System Fan Low Voltage  : 5.5v

10/29/02, ECH3.03C
1. Changed onboard VGA share memory size default from 1MB to 8MB.

10/24/02, ECH3.03B
1. Fixed when pressing "F1" to enter BIOS setup menu with user password will 
   display unnecessary strings in Hardware Monitor.
2. Changed boot device priority for Presario & Pavilion systems to be
   "Floppy -> Hard Drive -> ATAPI CD-ROM -> Network Boot",
   and for ePC system to be,
   "Hard Drive -> Floppy -> ATAPI CD-ROM -> Network Boot".
3. Move boot device priority items to "Boot Device Priority" sub-menu.

10/17/02, ECH3.03A
1. Added Recovery Partition support for Presario system and changed the key to
   enter Setup.
2. Changed the CPU frequency multiplier in Setup only for non-locked CPUs.
3. Added POST string to display "<F1=Setup> <F10=System Recovery>" over the
   HP/Compaq logo. And according to the language selected in Setup this POST
   string also support multi-language.

10/08/02, ECH3.03
1. Set CPU/System Fan Fault Check according to Tattoo setting.
2. Changed warning value of System Fan from 800rpm to 500rpm.
3. If CPU fan check is tattoo to "Disabled", setting the following values:
   CPU Fan Check           : Disabled
   System Fan Check        : Enabled                   
   Fan High Temp           : 57¢J (Northwood & Willamette are the same)
   CPU Fan High Voltage    : 10.5V (not affect)
   System Fan High Voltage : 11.5V
   Fan Low Temp            : 51¢J (Northwood & Willamette are the same)
   CPU Fan Low Voltage     : 7.0V (not affect)
   System Fan Low Voltage  : 5.5V
4. If CPU fan check is tattoo to "Enabled", setting the following values:
   CPU Fan Check           : Enabled
   System Fan Check        : Disabled 
   Fan High Temp           : Northwood : 59¢J
                             Willamette: 65¢J
   CPU Fan High Voltage    : 10.5v
   System Fan High Voltage : 11.5v
   Fan Low Temp            : Northwood : 51¢J
                             Willamette: 57¢J
   CPU Fan Low Voltage     : 7.0v
   System Fan Low Voltage  : 8.0v

09/05/02, ECH3.02B
1. Added 4 item values (4.5V, 5.0V, 5.5V, 6.0V) in FAN voltages setting options.

09/03/02, ECH3.02A
1. Enabled item value setting for FAN High/Low Temp item.
2. Disabled CPU Fan Fault Check for BIOS setup default.
3. Enabled System Fan Fault Check for BIOS seutp default.

08/27/02, ECH3.02
1. Added patch code for Audio CODEC abnormal issue.
2. Fixed dummy string appear in Hardware Monitor Group when enter BIOS
   setup menu by pressing <F1> with user password.

08/15/02, ECH3.01
1. Fixed WinXP boot failed when load default in POST while CMOS checksum error.

08/07/02, ECH3.00 (Checksum:D60A)
1. Release ECHO version 3.00 BIOS from version 0.16.