Motorola, Inc., Broadband Communications Sector ("Motorola") Cable Data Division,
101 Tournament Drive, Horsham, PA 19044
IMPORTANT: PLEASE READ THIS SOFTWARE LICENSE ("LICENSE") CAREFULLY
BEFORE YOU INSTALL, DOWNLOAD OR USE ANY APPLICATION SOFTWARE, USB DRIVER
SOFTWARE, FIRMWARE AND RELATED DOCUMENTATION ("SOFTWARE") PROVIDED WITH
MOTOROLA'S CABLE DATA PRODUCT (THE "CABLE DATA PRODUCT"). BY USING THE
CABLE DATA PRODUCT AND/OR INSTALLING, DOWNLOADING OR USING ANY OF THE
SOFTWARE, YOU INDICATE YOUR ACCEPTANCE OF EACH OF THE TERMS OF THIS
LICENSE. UPON ACCEPTANCE, THIS LICENSE WILL BE A LEGALLY BINDING
AGREEMENT BETWEEN YOU AND MOTOROLA. THE TERMS OF THIS LICENSE APPLY
TO YOU AND TO ANY SUBSEQUENT USER OF THIS SOFTWARE.
IF YOU DO NOT AGREE TO ALL OF THE TERMS OF THIS LICENSE (I) DO NOT INSTALL
OR USE THE SOFTWARE AND (II) RETURN THE CABLE DATA PRODUCT AND THE SOFTWARE
(COLLECTIVELY, "PRODUCT"), INCLUDING ALL COMPONENTS, DOCUMENTATION AND ANY
OTHER MATERIALS PROVIDED WITH THE PRODUCT, TO YOUR POINT OF PURCHASE OR
SERVICE PROVIDER, AS THE CASE MAY BE, FOR A FULL REFUND.
The Software includes associated media, any printed materials, and any "on-line" or electronic
documentation, as well as any updates, revisions, bug fixes, or drives obtained by you from
Motorola or your service provider. Software provided by third parties may be subject to separate
end-user license agreements from the manufacturers of such Software.
The Software is never sold. Motorola licenses the Software to the original customer and to any
subsequent licensee for personal use only on the terms of this License. Motorola and its 3rd
party licensors retain the ownership of the Software.
SOFTWARE LICENSE
You may: USE the Software only in connection with the operation of the Product. TRANSFER the
Software (including all component parts and printed materials) permanently to another person,
but only if the person agrees to accept all of the terms of this License. If you transfer the
Software, you must at the same time transfer the Product and all copies of the Software
(if applicable) to the same person or destroy any copies not transferred.TERMINATE this License
by destroying the original and all copies of the Software (if applicable) in whatever form.
You may not: (1) Loan, distribute, rent, lease, give, sublicense or otherwise transfer the Software,
in whole or in part, to any other person, except as permitted under the TRANSFER paragraph above.
(2) Copy or translate the User Guide included with the Software, other than for personal use.
(3) Copy, alter, translate, decompile, disassemble or reverse engineer the Software, including
but not limited to, modifying the Software to make it operate on non-compatible hardware.
(4) Remove, alter or cause not to be displayed, any copyright notices or startup message contained
in the Software programs or documentation.
(5) Export the Software or the Product components in violation of any United States export laws.
The Product is not designed or intended for use in on-line control of aircraft, air traffic, aircraft
navigation or aircraft communications; or in design, construction, operation or maintenance of any
nuclear facility.
MOTOROLA AND ITS 3RD PARTY LICENSORS DISCLAIM ANY EXPRESS OR IMPLIED
WARRANTY OF FITNESS FOR SUCH USES. YOU REPRESENT AND WARRANT THAT
YOU SHALL NOT USE THE PRODUCT FOR SUCH PURPOSES.
Title to this Software, including the ownership of all copyrights, mask work rights, patents, trademarks
and all other intellectual property rights subsisting in the foregoing, and all adaptations to and
modifications of the foregoing shall at all times remain with Motorola and its 3rd party licensors.
Motorola retains all rights not expressly licensed under this License. The Software, including any
images, graphics, photographs, animation, video, audio, music and text incorporated therein is owned
by Motorola or its 3rd party licensors and is protected by United States copyright laws and international
treaty provisions. Except as otherwise expressly provided in this License, the copying, reproduction,
distribution or preparation of derivative works of the Software, any portion of the Product or the
documentation is strictly prohibited by such laws and treaty provisions. Nothing in this License
constitutes a waiver of Motorola's rights under United States copyright law.
This License and your rights regarding any matter it addresses are governed by the laws of the
Commonwealth of Pennsylvania, without reference to conflict of laws principles.
THIS LICENSE SHALL TERMINATE AUTOMATICALLY if you fail to comply with the terms of this
License. Motorola is not responsible for any third party software provided as a bundled
application, or otherwise, with the Software.
U.S. GOVERNMENT RESTRICTED RIGHTS
The Product and documentation is provided with RESTRICTED RIGHTS. The use, duplication or
disclosure by the Government is subject to restrictions as set forth in subdivision (c)(1)(ii) of The
Rights in Technical Data and Computer Software clause at 52.227-7013. The contractor/ manufacturer
is Motorola, Inc., Broadband Communications Sector, 101 Tournament Drive, Horsham, PA 19044.
WARRANTY INFORMATION
Motorola warrants to you, the original end user customer, that (A) the Product, excluding Software,
will be free from defects in materials and workmanship under normal use, and (B) with respect to
Software, (i) the media on which the Software is provided will be free from defects in material
and workmanship under normal use, and (ii) the Software will perform substantially as described in
its documentation. This Limited Warranty to you, the original end user customer, continues (A) for
Software and the media upon which it is provided, for a period of ninety (90) days from the date
of purchase from Motorola or an authorized Motorola reseller, and (B) for the Product
(excluding Software), for a period of two (2) years from the date of purchase from Motorola or from
an authorized Motorola reseller. To take advantage of this Limited Warranty or to obtain technical
support, you must call the Motorola toll-free phone number (below). Motorola's sole and exclusive
obligation under this Limited Warranty for retail sales shall be to repair or replace any Product
or Software that does not meet this Limited Warranty. All warranty claims must be made within the
applicable Warranty PeriodThe warranties described in this Section shall not apply: (i) to any
Product subjected to accident, misuse, neglect, alteration, Acts of God, improper handling, improper
transport, improper storage, improper use or application, improper installation, improper testing or
unauthorized repair; or (ii) to cosmetic problems or defects which result from normal wear and tear
under ordinary use, and do not affect the performance or use of the Product. Motorola's warranties
apply only to a Product that is manufactured by Motorola and identified by Motorola owned trademark,
trade name or product identification logos affixed to the Product. Motorola does not warrant to you,
the end user, or to anyone else that the Software will perform error free or without bugs.
MOTOROLA IS NOT RESPONSIBLE FOR, AND PROVIDES "AS IS" ANY SOFTWARE SUPPLIED
BY 3RD PARTIES. EXCEPT AS EXPRESSLY STATED IN THIS SECTION ("WARRANTY
INFORMATION"), THERE ARE NO WARRANTIES OF ANY KIND RELATING TO THE PRODUCT,
EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT LIMITED TO IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR THE
WARRANTY AGAINST INFRINGEMENT PROVIDED IN THE UNIFORM COMMERCIAL CODE.
Some states do not allow for the exclusion of implied warranties, so the above exclusion may not apply
to you. What additional provisions should I be aware of?
Because it is impossible for Motorola to know the purposes for which you acquired this Product
or the uses to which you will put this Product, you assume full responsibility for the selection
of the Product for its installation and use. While every reasonable effort has been made to
insure that you will receive a Product that you can use and enjoy, Motorola does not warrant
that the functions of the Product will meet your requirements or that the operation of the
Product will be uninterrupted or error-free. MOTOROLA IS NOT RESPONSIBLE FOR PROBLEMS
OR DAMAGE CAUSED BY THE INTERACTION OF THE PRODUCT WITH ANY OTHER
SOFTWARE OR HARDWARE. ALL WARRANTIES ARE VOID IF THE PRODUCT IS
OPENED, ALTERED, AND/OR DAMAGED.
THESE ARE YOUR SOLE AND EXCLUSIVE REMEDIES for any and all claims that you may have
arising out of or in connection with this Product, whether made or suffered by you
or another person and whether based in contract or tort.
IN NO EVENT SHALL MOTOROLA BE LIABLE TO YOU OR ANY OTHER PARTY FOR ANY
DIRECT, INDIRECT, GENERAL, SPECIAL, INCIDENTAL, CONSEQUENTIAL, EXEMPLARY
OR OTHER DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PRODUCT
(INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS,
BUSINESS INTERRUPTION, LOSS OF INFORMATION OR ANY OTHER PECUNIARY LOSS),
OR FROM ANY BREACH OF WARRANTY, EVEN IF MOTOROLA HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. IN NO CASE SHALL MOTOROLA'S LIABILITY EXCEED
THE AMOUNT YOU PAID FOR THE PRODUCT.
These matters are governed by the laws of the Commonwealth of Pennsylvania, without regard to
conflict of laws principles and excluding the provisions of the United Nations Convention on
Contracts for the International Sale of Goods.
The Motorola toll-free number is 1-877-466-8646 for technical support or warranty service.
Software License, Warranty, Safety, and Regulatory Information Broadband Home Networking
Products.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE. THE UNIT MUST NOT BE EXPOSED TO DRIPPING OR SPLASHING. DO NOT
PACE OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, ON THE UNIT. CAUTION: TO
ENSURE REGULATORY COMPLIANCE, USE ONLY THE PROVIDED POWER AND INTERFACE
CABLES.
CAUTION: DO NOT OPEN THE UNIT. DO NOT PERFORM ANY SERVICING OTHER THAN THAT
CONTAINED IN THE INSTALLATION AND TROUBLESHOOTING INSTRUCTIONS. REFER ALL
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This device must be installed and used in strict accordance with the manuafacturer's instructions as
described in the user documentation that comes with the product. Postpone router installation until
there is no risk of thunderstorm or lightning activity in the area. Do not overload outlets or
extension cords, as this can result in a risk of fire or electric shock. Overloaded AC outlets,
extension cords, frayed power cords, damaged or cracked wire insulation, and broken plugs are
dangerous. They may result in a shock or fire hazard. Route power supply cords so that they are not
likely to be walked on or pinched by items placed upon or against them. Pay particular attention to
cords where they are attached to plugs and convenience receptacles, and examine the point where
they exit from the product. Place this equipment in a location that is close enough to an electrical
outlet to accommodate the length of the power cord. Place this equipment on a stable surface. When
using this device, basic safety precautions should always be followed to reduce the risk of fire,
electric shock and injury to persons, including the following:
- Read all of the instructions {listed here and/or in the user manual} before you operate this equipment.
Give particular attention to all safety precautions. Retain the instructions for future reference.
- Comply with all warning and caution statements in the instructions. Observe all warning and caution
symbols that are affixed to this equipment.
- Comply with all instructions that accompany this equipment.
- Avoid using this product during an electrical storm. There may be a risk of electric shock from lightning.
For added protection for this product during a lightning storm, or when it is left unattended and unused
for long periods of time, unplug it from the wall outlet, and disconnect the cable system. This will
prevent damage to the product due to lightning and power surges.
- Operate this product only from the type of power source indicated on the product?s marking label.
If you are not sure of the type of power supplied to your home,
consult your dealer or local power company.
- Upon completion of any service or repairs to this products, ask the service technician to perform
safety checks to determine that the product is in safe operating condition.
It is recommended that the customer install an AC surge protector in the AC outlet to which this device
is connected. This is to avoid damaging the equipment by local lightning strikes and other electrical
surges. Different types of cord sets may be used for connections to the main supply circuit. Use only
a main line cord that complies with all applicable product safety requirements of the country of use.
Installation of this product must be in accordance with national wiring codes. Place unit to allow for
easy access when disconnecting the power cord/adapter of the device from the AC wall
outlet. Wipe the unit with a clean, dry cloth. Never use cleaning fluid or similar chemicals. Do not
spray cleaners directly on the unit or use forced air to remove dust. This product was qualified under
test conditions that included the use of the supplied cables between system components. To be in
compliance with regulations, the user must use these cables and install them properly. Connect the unit
to a grounding type AC wall outlet using the power adapter supplied with the unit. Do not cover the
device, or block the airflow to the device with any other objects. Keep the device away from excessive
heat and humidity and keep the device free from vibration and dust. Installation must at all times
conform to local regulations. FCC Compliance Class B Digital Device. This equipment has been tested
and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by Motorola for compliance could void the
user's authority to operate the equipment.
Canadian Compliance
This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment
Regulations. Cet appareil numerique de la classe B respects toutes les exigences du Reglement sur le
materiel brouilleur du Canada.
Software License, Warranty, Safety, and Regulatory Information
Broadband Home Networking Products
FCC Declaration of Conformity
Motorola, Inc., Broadband Communications Sector, 101 Tournament Drive, Horsham, PA 19044,
1-215-323-1000, declares under sole responsibility that the WR850G, WE800G, WA840G, WN825G,
WPCI810G, WU830G, WPS870G, and BR700 compile with 47 CFR Parts 2 and 15 of the FCC Rules as
a Class B digital device. This device complies with Part 15 of FCC Rules.
Operation of the device is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference that may cause undesired
operation. Wireless LAN Information
The WR850G, WE800G, WA840G, WN825G, WPCI810G, WU830G, and WPS870G Wireless LAN
products are wireless network products that uses Direct Sequence Spread Spectrum
(DSSS) radio technology. This product is designed to be inter-operable with any other wireless DSSS
type product that complies with:
- The IEEE 802.11 Standard on Wireless LANs (Revision B and Revision G), as defined and approved
by the Institute of Electrical Electronics Engineers.
- The Wireless Fidelity (WiFi) certification as defined by the Wireless Ethernet Compatibility Alliance
(WECA).
Wireless LAN and your Health
The WR850G, WE800G, WA840G, WN825G, WPCI810G, WU830G, and WPS870G, like other radio
devices, emits radio frequency electromagnetic energy, but operates within the guidelines
found in radio frequency safety standards and recommendations.
Restrictions on Use of Wireless Devices
In some situations or environments, the use of wireless devices may be restricted by the proprietor
of the building or responsible representatives of the organization. For example, these situations
may include:
- Using wireless equipment on board an airplane.
- Using wireless equipment in any environment where the risk of interference to other devices
or services is perceived or identified as harmful.
If you are uncertain of the applicable policy for the use of wireless equipment in a specific organization
or environment (such as airports), you are encouraged to ask for authorization to use the device prior
to turning on the equipment.
The manufacturer is not responsible for any radio or television interference caused by unauthorized
modification of the devices included with this product, or the substitution or attachment of
connecting cables and equipment other than specified by the manufacturer. Correction of interference
caused by such unauthorized modification, substitution, or attachment is the responsibility of the
user. The manufacturer and its authorized resellers or distributors are not liable for any damage or
violation of government regulations that may arise from failing to comply with these guidelines.
FCC Certification
The WR850G, WE800G, WA840G, WN825G, WPCI810G, WU830G, and WPS870G contains a radio
transmitter and accordingly has been certified as compliant with 47 CFR Part 15 of the FCC Rules
for intentional radiators. Products that contain a radio transmitter are labeled with FCC ID and
the FCC logo.
Caution: Exposure to Radio Frequency Radiation.
To comply with the FCC RF exposure compliance requirements, the separation distance between the
antenna and any person's body (including hands, wrists, feet and ankles) must be at least 20 cm
(8 inches).
Canada - Industry Canada (IC)
The wireless radio of this device complies with RSS 210 ans RSS 102 of Industry Canada.
This Class B digitral device complies with Canadian ICES-003 (NMB-003).
Cet appareil numerique de la classe B respects toutes les exigences du Reglement sur le materiel
brouilleur du Canada.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.