FR-CS1000_306.txt Driver File Contents (FW-CS1000_306.zip)

PLANET Content Security Gateway Software Release
------------------------------------------------

Router supported : CS-1000
Release date:   	    07/06/23
New Release Version:        3.06.14
Previous version:           2.44


Added Features and Software Changes:
====================================
a) Added admin can modify the MAC of WAN/LAN/DMZ's interfaces.
b) Added extension (wma, rmvb, rm, avi, wmv, 3gp, mov, asf, mp4, amv and ram) in Content Blocking function.
c) Added Ping & Traceroute function in "Policy>Diagnostic".


Previous Release History:
=========================
Version 2.44
a) Added By Destination IP in WAN Balance Mode.
b) Added application (KuGoo, AppleJuice, AudioGalaxy, DirectConnect, iMesh, MUTE, Thunder5 and VNN Client) in P2P Blocking function.
c) Changed IM & P2P Blocking options from "PolicyObject>ContentBlocking>IM" & "PolicyObject>ContentBlocking>P2P" to "PolicyObject>IM/P2PBlocking".
d) Fixed MSN disconnect when send the voice and file at the same time.

Version 2.40
a) Added By Source IP in WAN Balance Mode.
b) Added Network segment of China Telecom & China Network Communication Corporation.
c) Added MAX. Bandwidth Per Source IP in Policy.
d) Added Static ARP in ARP Table.
e) Improve URL Blocking to 300 Strings.
f) Fixed PPPoE issue that hard to dial on after reboot.
g) Fixed proved users can not surf internet by correct policies.
h) Fixed system will not write to memory after click OK, if without modifying.
i) Fixed Anti-Spam & Anti-Virus issue that has too many virus codes.

Version 2.30
a) System > Configure >Dynamic DNS: add DDNS provider: www.3322.org
b) Policy: add Tips function.
c) Mail Security > Anti-Spam > Setting: add Spam signature.
d) Authentication: add POP3 and RADIUS functions.
e) Modify Content Blocking > Download efficiency.
 
Version 2.22 
a) System > Configure > Date/Time: add daylight saving time function
b) Anomaly Flow IP > Setting: add un-detect ip. if there is the ip been set as un-detected ip, system will not detect the bandwidth of that ip.
c) add wake on lan function.
d) add SIP protocol pass-through function, fix SIP protocol pass through function.

version 2.21
a) add Service-On-Demand feature in PPPoE configuration.
b) fixed the virus updated issue that will stop Internet connection.

version 2.20
a) add Upload Blocking in Content Filtering function to block the upload traffic for the specific type of the file.
b) fixed Accounting Report feature will display abnormal IP address.

version 2.12
a) add "Accounting Report" function
b) add the feature to import or export Anti-spam whitelist and blacklist from excel file
c) add "Anomaly Flow IP" feature to stop DoS/DDoS attack, and deliver a warning message.
d) add NAT feature in Incoming, WAN to DMZ, LAN to DMZ, DMZ to LAN Policy.

version 2.11
a) fixed some virus can not be detected correctly.
b) fixed unable to get IP address with ADE-3400/4400 in half bridge mode.

version 2.10
a) add new extension blocking ".com",".msi",".reg",".mp3",".mpeg",".mpg" into download blocking.

version 2.04
a) add Anomaly feature in IDP to detect and prevent abnormal connection 
b) add feature to auto detect IM and P2P software version, and update new pattern to renew content blocking function
c) add "Pause" feature in Policy
d) Separate the mail size limitation setting per Anti-spam and Anti-virus

version 2.02
a) add "Check sender account" feature in Anti-Spam function
b) add IDP feature
c) change VPN configuration, user must configure Policy rule to enable VPN function
d) fixed Email setting feature in Setting function, allow user to type the Device name
e) fixed Anti-Spam Training issue, when device reboot, the imported database will disappear
f) fixed IM Blocking feature that can not block QQ 2005 Beta2 version
g) fixed Anti-Spam Training issue that will happen TCP 25 port failure when the imported database is over than 5MB 

version 1.72
a) add User Authentication feature

version 1.70
a) fixed WAN interface set to Dynamic IP, it will fail to get IP address.
b) fixed external user can not mail out to external mail server via internal mail server 

version 1.65
a) add QoS feature
b) improve the compatibility with Exchange server


Note: If user want to upgrade 2.02 version firmware, and the current device installed with early firmware version than 2.00,
      user must erase the VPN configuration about "IPSec Autokey", "PPTP Server", and "PPTP Client" first, then start to upgrade the new firmware 

Software Update Procedure:
========================
To perform the Software Update:
Step 1. Enter the web interface.
Step 2. Select "System" --> "Administration" and then select "Software Update".
Step 3. Click Browse to select the latest version of Software.
Step 4. Click OK to update software.


Thanks for choosing PLANET products, any comment or feedback will be appreciated..


Best Regards ,

PLANET Tech SupportTeam

Router Technical support:support@planet.com.tw
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 1.85