PLANET Interent Camera Firmware/utility Release -------------------------------------------------- Product supported : ICA-102W Release date: October/05/05 New Release Version: 1.21 Previous Release: 1.21 Based on previous v1.21 1. Fix that motion detection can not trigger to send email. -------------------------------------------------- Release date: May/16/05 New Release Version: 1.21 Previous Release: 1.20 Fixed: 1. If pressing button in 3 scconds, camera will reboot. If pressing button over 3 seconnds then releasing it, camera will restore factory default and reboot. (Default IP address: 192.168.0.20, username/password: admin/admin) 2. Maximum views are 4 and an error message will jump out on the 5th view. Note: ======================================================================================= 1) Please do not use the motion detection function during firmware upgrade. 2) Do not power off machine or interrupt the upgrading procedure, or the inner component might be damaged permanently. ========================================================================================= Thanks for choosing PLANET products. Best Regards , PLANET Tech SupportTeam Technical Service: support_voip@planet.com.twDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.