1. FW-FPS1010Gv3222A.zip Driver
2. Release Note.txt File Contents

Release Note.txt Driver File Contents (FW-FPS1010Gv3222A.zip)

FW-FPS1010G Release Note:
V3.2
           1.Fixing Ad-hoc Beacon too hard
           2.Fixing Ad-hoc on WPA with wrong Encryption type Beacon
           3.Web Page "Model Number"

V3.1       
           1.Konica 2490 MF print OK
           2.SMB function: Pass Job when error occured
           3.fix IPP problem:3 Concurrent Print Jobs will cause the 3rd job hanging and incorrect printing  

V3.0
           1.Wireless LED will light off when using Wireless WEP and connected to AP
V2.9
           1.Fix the problem of PC( Wireless mode) can not connect to 
             Print Server( Wireless mode) through AP     
V2.8
					 1.Change Web Upgrade Flash Write to Toggle mode
V2.7
           1.Fix hanging problem when utilities upgrading (UDP checksum 0XFFFF=>0x0000 )
           2.Fix the compatibilities of dynamically request DHCP
           (3.sitecom=>web javascript remove)
           (4.Edimax OBM WEB pages)
v2.6
           1.Change boot code and upg code to fix MAC only when 
             MAC ID = 000000 or FFFFFF  (to 001122334455)
V2.5
           1.Default WLAN FUNCTION = AUTO
V2.4
           1.Add DHCP Detect function for dynamically request DHCP
           2.DecryptDone - ICV error (DO NOT DISCONNECT)
v2.3
           1.WLAN AUTO MODE :switching by LAN pluged or not
           2.Fix WEB Wireless Encryption WEP ASCII setting do not work
           3.Fix WPA fail when WPA key length over 11 digits
v2.2
           1.Enhance USB transmit rate
           2.Fix the bug with EndPoint Setting
V2.1
           1.System Info for SMB enable/disable
           2.Setup Wizard =>SMB  for SMB to set Enable/Disable
           3.Setup Wizard =>System for fetch Password with"****"

V2.0
           1.remove HAND cursor from system status
           2.left menu's tree expand for single link (system or wireless)
           3.system status=> wirless configuration(fixed)
           4.Printer status=>correctly..(fixed)
           5.When SNMP setting is empty ,we show it "None"
           6.System Advance setting=> LPD to LPR
           7.Netware status => Port1 Attachd Queue(Fixed)
           8.Wireless Encryption=> WPA key to WPA Shared Key

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.