; Copyright (c) ZyXEL Communications Corp. 2004
; Omni.Net Lite ISDN TA
;
; Internal INF Revision : 3.12
; unify all drivers to one MLPPP, let utility setup MLP/PPP/V.120
; remove AT&F(reset some to default), remove ATX0 or ATX1 and show line speed ppp:64k, MP:128k
; Mfg1 string->ZyXEL
; mask usb for Omni.Net Lite ;-
; run ChkINF
[Version]
;CatalogFile=TA.cat
Signature="$CHICAGO$"
Class=Modem
Provider=%Mfg1%
ClassGUID={4D36E96D-E325-11CE-BFC1-08002BE10318}
DriverVer=12/08/2004,1.0.5.0
[DestinationDirs]
;-USBCopyFileSection=12
DefaultDestDir = 12
[Manufacturer]
%Mfg1% = Models
[Models]
; serial
%MLP% = MLP, *SET0011
;%PPP% = PPP, *SET0011
;%V120% = V120, *SET0011
; usb win 9x
;-%USBMLP% = USBMLP, USB\SET0021
;%USBPPP% = USBPPP, USB\SET0021
;%USBV120% = USBV120, USB\SET0021
; serial
;[PPP]
;AddReg=All, TMfgAddReg, PPP.AddReg, EXTERNAL
[MLP]
AddReg=All, TMfgAddReg, MLP.AddReg, EXTERNAL
;[V120]
;AddReg=All, TMfgAddReg, V120.AddReg, EXTERNAL
; usb win9x
;[USBPPP]
;AddReg = All, TMfgAddReg, PPP.AddReg, Result1, USB
;-[USBMLP]
;-AddReg = All, TMfgAddReg, MLP.AddReg, Result1, USB
;[USBV120]
;AddReg = All, TMfgAddReg, V120.AddReg, Result1, USB
;-[USBCopyFileSection]
;-usbser.sys,,,0x20
; common
;[PPP.AddReg]
;HKR,, Properties, 1, 00,00,00,00, FF,00,00,00, 00,00,00,00, 00,00,00,00, 00,00,00,00, 30,00,00,00, 00,84,03,00, 00,F4,01,00
;HKR,, DCB, 1, 1C,00,00,00, 00,C2,01,00, 15,20,00,00, 00,00, 0A,00, 0A,00, 08, 00, 00, 11, 13, 00, 00, 00
;;HKR, Init, 3,, "ATC0=8C1=0<cr>"
;HKR, Init, 3,, "AT<cr>"
[MLP.AddReg]
HKR,, Properties, 1, 00,00,00,00, FF,00,00,00, 00,00,00,00, 00,00,00,00, 00,00,00,00, 30,00,00,00, 00,84,03,00, 00,F4,01,00
HKR,, DCB, 1, 1C,00,00,00, 00,C2,01,00, 15,20,00,00, 00,00, 0A,00, 0A,00, 08, 00, 00, 11, 13, 00, 00, 00
;HKR, Init, 3,, "ATC0=8C1=1<cr>"
HKR, Init, 3,, "AT&F&D2&C1S0=0<cr>"
;[V120.AddReg]
;HKR,, Properties, 1, 00,00,00,00, FF,00,00,00, 00,00,00,00, 00,00,00,00, 00,00,00,00, 30,00,00,00, 00,84,03,00, 00,F4,01,00
;HKR,, DCB, 1, 1C,00,00,00, 00,C2,01,00, 15,20,00,00, 00,00, 0A,00, 0A,00, 08, 00, 00, 11, 13, 00, 00, 00
;;HKR, Init, 3,, "ATC0=4<cr>"
;HKR, Init, 3,, "AT<cr>"
; different result code for USB
;-[Result1]
;-;HKR, Init, 4,, "ATX1<cr>"
;-HKR, Init, 4,, "AT<cr>"
; common
[Strings]
;ClassName = "Modem"
Mfg1 = "ZyXEL"
; serial
;PPP="TYPE 1 (PPP 64K)"
;MLP="TYPE 2 (MLP 128K)"
MLP="Omni.Net Lite ISDN TA"
;V120="TYPE 3 (V.120 64K)"
; usb win 9x
;USBPPP="USB TYPE 1 (PPP 64K)"
;USBMLP="USB TYPE 2 (MLP 128K)"
;-USBMLP="Omni.Net Lite ISDN TA (USB)"
;USBV120="USB TYPE 3 (V.120 64K)"
[All]
HKR,,FriendlyDriver,,Unimodem.vxd
HKR,,DevLoader,,*vcomm
HKR,,PortSubClass,1,02
HKR,,ConfigDialog,,modemui.dll
HKR,,EnumPropPages,,"modemui.dll,EnumPropPages"
;HKR, Init, 1,, "AT&F<cr>"
HKR, Init, 1,, "AT<cr>"
;HKR, Init, 2,, "AT&C1&D2E0V1X0W0<cr>"
HKR, Init, 2,, "ATE0V1<cr>"
; serial and usb NT
[EXTERNAL]
HKR,,DeviceType, 1, 01
; usb win 9x
;-[USB]
;-HKR,,DeviceType, 1, 01
;-HKR,,PortDriver,,wdmmdmld.vxd
;-HKR,,Contention,0,
[TMfgAddReg]
HKR, Monitor, 1,, "ATS0=0<cr>"
HKR, Monitor, 2,, "None"
HKR, Hangup, 1,, "ATH<cr>"
HKR, Answer, 1,, "ATA<cr>"
HKR, Settings, Prefix,, "AT"
HKR, Settings, Terminator,, "<cr>"
HKR, Settings, DialPrefix,, "D"
HKR, Settings, DialSuffix,, ""
HKR, Settings, CallSetupFailTimer,, "S7=<#>"
HKR, Settings, FlowControl_Off,, "&K0"
HKR, Settings, FlowControl_Hard,, "&K3"
HKR, Settings, FlowControl_Soft,, "&K4"
HKR,, Reset,, "AT&F<cr>"
HKR, Responses, "0<cr>", 1, 00, 00, 00,00,00,00, 00,00,00,00 ; OK
HKR, Responses, "1<cr>", 1, 02, 00, 00,00,00,00, 00,00,00,00 ; CONNECT
HKR, Responses, "2<cr>", 1, 08, 00, 00,00,00,00, 00,00,00,00 ; RING
HKR, Responses, "3<cr>", 1, 04, 00, 00,00,00,00, 00,00,00,00 ; NO CARRIER
HKR, Responses, "4<cr>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; ERROR
HKR, Responses, "6<cr>", 1, 05, 00, 00,00,00,00, 00,00,00,00 ; NO DIALTONE
HKR, Responses, "7<cr>", 1, 06, 00, 00,00,00,00, 00,00,00,00 ; BUSY
HKR, Responses, "8<cr>", 1, 07, 00, 00,00,00,00, 00,00,00,00 ; NO ANSWER
HKR, Responses, "<cr><lf>OK<cr><lf>", 1, 00, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>RING<cr><lf>", 1, 08, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>NO CARRIER<cr><lf>", 1, 04, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>ERROR<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>NO DIALTONE<cr><lf>", 1, 05, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>NO DIAL TONE<cr><lf>", 1, 05, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>BUSY<cr><lf>", 1, 06, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>NO ANSWER<cr><lf>", 1, 07, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT<cr><lf>", 1, 02, 00, 00,00,00,00, 00,00,00,00
;HKR, Responses, "<cr><lf>CONNECT 0.3K<cr><lf>", 1, 02, 00, 2C,01,00,00, 00,00,00,00
;HKR, Responses, "<cr><lf>CONNECT 0.6K<cr><lf>", 1, 02, 00, 58,02,00,00, 00,00,00,00
;HKR, Responses, "<cr><lf>CONNECT 1.2K<cr><lf>", 1, 02, 00, B0,04,00,00, 00,00,00,00
;HKR, Responses, "<cr><lf>CONNECT 2.4K<cr><lf>", 1, 02, 00, 60,09,00,00, 00,00,00,00
;HKR, Responses, "<cr><lf>CONNECT 4.8K<cr><lf>", 1, 02, 00, C0,12,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 9.6K<cr><lf>", 1, 02, 00, 80,25,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 19.2K<cr><lf>", 1, 02, 00, 00,4B,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 38.4K<cr><lf>", 1, 02, 00, 00,96,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 57.6K<cr><lf>", 1, 02, 00, 00,E1,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 115.2K<cr><lf>", 1, 02, 00, 00,C2,01,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 230.4K<cr><lf>", 1, 02, 00, 00,84,03,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 64K<cr><lf>", 1, 02, 00, 00,FA,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 128K<cr><lf>", 1, 02, 00, 00,F4,01,00, 00,00,00,00
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.