PLANET ADSL Bridge Router Family Firmware Release ----------------------------------------------- Product supported : ADE-3000/ADE-4000, Annex A and Annex B *NOTE: This firmware release only allow to upgrade from 080902R9 or later version. New Release Version: 080902R9P2 Previous Release Version: 080902R9P Changes Since Previous Release: =============================== (The previous release was: 080902_REL9P) a) Fixed some compatibility problem with Alcatel DSLAM Update History: =============== Firmware 080902R9P a) Showtime 3.27 b) Fixed G.HS connection problem with Alcatel Annex B DSLAM c) Improved upstream connect rates in ETSI mode for Alcatel DSLAM d) Improved upstream connect rates against Alcatel and Nokia/GSPN Annex B DSLAM e) New Compressed Web Pages (HTZ and JSZ files for HTM and JS files) f) Fixed recode network code image upgrade problem g) Fixed file transfer problem with MSN Messenger 5.0 h) Enhanced PPP Half Bridge operation i) Allowed CPE to ship with no PVC is enabled j) New USB Net Driver 031103_REL3 Firmware 080902R9K a) Showtime v3.24 b) Fix NEC GSPN EOC problem with SNR and Attenuation status reporting c) Improved upstream SNR with Siemens 2.0 for the DT fast path test d) Improved downstream performance with DT short loop rate adaptive tests e) Fixed USB enumeration 60-second timeout problem Firmware 080902R9J a) Improved performance with Alcatel ETSI mode in Annex B b) Improved SNR margin for certain loops, such as ANSI13+24 HDSL c) Improved performance with Inovia DSLAM e) Fix SNR reporting for ECI DSLAM in Annex B mode f) Added interoperability support with Catena DSLAM g) Added Clear EOC channel support h) Fixed Line Attenuation reporting problem with ECI Annex B DSLAM i) Added ADSL Vendor ID and serial number configuration j) Added Boarder Gateway support for RIPv2 k) Fixed routing table for invalid entries l) Enhanced IGMP performance m) Fixed DHCP server IP pool problem n) Fixed RIPv2 IP and subnet reporting problem o) Increased reset to factory default time to 500 ms p) Fixed PPTP problem in the PPP Half Bridge Mode q) Fixed HTTP access problem for the PPP Half Bridge Mode s) Fixed PPP disconnected problem during stress test Firmware 080902R9 a) Showtime code v3.14 b) Improved performance with Alcatel Annex B DSLAM, GSI Annex B DSLAM, Alcatel 7300 FG7, c) Improved performance in G.HS to common training states for Centillium DSLAM d) Added automatic sensing of GSPN Annex B N54 e) Added MAX TX Power Status (maximum upstream transmit power spectral density) f) Added CO Vendor Status g) Added ¡§Reboot Without Saving¡¨ Web page h) Added multiple gateways for PVC interfaces i) Added Dynamic RIP Interfaces j) Added Per Interface RIP configurations k) Added user assigned Default Gateway Configauation l) Added new Routing Table and Route Configuration m) Added messages during the firmware upgrade n) Added two Web pages to show the status after the Save Setting o) Improved rate and reach performance with longer loops (> 13 kft) with 24HDSL and 5T1 crosstalk p) Smoothed out G.Lite connection to AFC/Centillium 6+6 card for quicker connection q) PPP auto reconnect and configurable timeouts r) Enhanced connection with Centillium CO in Annex A G.dmt and T1.413 s) Improved upstream performance with Cisco 6260 in Annex B mode t) Fixed HTTP Port problem with HTTP Server Access u) Changed default DHCP Lease Time to 1-Day v) Fixed Max TX Power Status w) Fixed IGMP form PPPoA and PPPoE x) Allowed the blank/empty PPPoA user name and password for authentication y) Fixed can not check (select) the Automatic Reconnect at WAN Page without PPP user name and password z) Fixed WAN IP release and renew problem Firmware upgrade ================ NOTE: This firmware release only allow to upgrade from 080902R9 or later version. Logon machine via web administration interface, and choose "Code Image Update", then browse the location of firmware file (FW-XXX.dlf), and click the Upload button, then follow screen text to complete firmware update. Default Administration Parameters ================================= Default LAN Port IP Address: 10.0.0.2 Default LAN Port Subnet Mask: 255.0.0.0 Two-level password protection User Level User Name: user Password: password Administration Level User Name: admin Password: epicrouter FTP login User Name: admin Password: epicrouter Telnet Password: epicrouter Thanks for choosing PLANET products, any comment or feedback will be appreciated. Best Regards, PLANET Tech Support Team ADSL product Technical support: support_adsl@planet.com.twDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.