PLANET Voice over IP product Firmware/utility Release -------------------------------------------------- Product supported : 2~24 Port VoIP Series Gateway Release date: 04/12/07 New Release Version: 2.8.6L Previous Release: 2.8.2L Issue Fixed 1. ¡§Logout¡¨ function can not work by using Mozilla browser. 2. SIP : Choose our preferred codec depends on the codec order of remote peer. 3. SIP Port number cannot set '_' 4. SIP Empty request-line in ACK for 401 after INVITEing. 5. Fix stun function in bridge mode 6. Fix re-invite when facing asterisk. 7. Fix INVITE without SDP. SDP is allowed in INVITE/200 or 200/ACK for baseline implementations. New Function 1. Add outgoing call always go through SIP proxy server 2. Add VoIP encryption function in peer to peer call 3. Add Auto-provision function in VIP-281/281FS/400/400FS/400FO Series 4. Add SIP will display caller ID in FXS port 5. Add SNTP support Iran time zone 6. Add generate C tone when call connect 7. Add enable/disable busy tone auto-learn 8. Add hot line delay function 9. Change configuration backup restore to dial plan and voip basic backup restore 10. Add get dns server ip address from dhcp or PPPoE server 11. Add IP / Port Filter function 12. Add setting of dial/busy/ring back tone generation 13. Add setting of busy tone cadence 14. Add logout function in web UI 15. Add support 3322 and no-ip ddns client 16. Change virtual server to port range 17. Add support for MWI (Message Waiting Indicator) 18. Add SIP trunk in SVR. -------------------------------------------------- Product supported : 2~24 Port VoIP Series Gateway Release date: 09/12/06 Utility Version: 2.8.2L Initial Release **************************** Thanks for choosing PLANET products. Best Regards , PLANET Tech SupportTeam VoIP Technical Service: support_voip@planet.com.twDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.