English1252=Vietnamese1252 HtmlBaseIndex=2 Initiate Voip Call=Baét ñaàu Cuoäc goïi Voip Send Key=Phím Göûi Call Waiting Sequence=Chuoãi Cuoäc goïi Chôø Conference Key Sequence=Chuoãi phím Goïi Hoäi nghò Popup Skype Window=Cöûa soå Skype Popup Restore Defaults=Khoâi phuïc Maëc ñònh Restore=Khoâi phuïc Enabled=Ñaõ baät TLink VoIP Personal Gateway (Beta)=Coång giao tieáp Caù nhaân Tlink VoIP (baûn Beta) Popup Skype window when initiating VoIP call=Cöûa soå Skype Popup khi baét ñaàu goïi VoIP Press these keys during a call to switch between a VoIP and regular call=Nhaán nhöõng phím naøy trong khi goïi ñeå chuyeån giöõa cuoäc goïi thöôøng vaø VoIP Press these keys to get VoIP dial tone=Nhaán nhöõng phím naøy ñeå taûi aâm quay soá VoIP Press this key following the phone number (or speed dial number) when making a VoIP call=Nhaán phím naøy sau khi nhaán soá ñieän thoaïi (hoaëc soá quay nhanh) khi ñang goïi VoIP Press these keys during a call to conference a VoIP and regular calls=Nhaán nhöõng phím naøy trong khi goïi hoäi nghò ñeå chuyeån giöõa cuoäc goïi thöôøng vaø VoIP General=Bình thöôøng Call Forward Settings=Caøi ñaët Chuyeån tieáp Cuoäc goïi Call Forwarding=Ñang chuyeån tieáp Cuoäc goïi VoIP To Phone Line=VoIP Sang Ñieän thoaïi Rings Before Forwarding=Reo Tröôùc khi Chuyeån tieáp Number To Dial=Soá Saép Goïi Phone Line To VoIP=Ñieän thoaïi Sang VoIP Empty Number Not Allowed=Khoâng theå Ñeå Troáng Soá Only Digits Allowed=Chæ Cho Ñieàn Soá First Character Must be=Kyù töï Ñaàu tieân Phaûi laø First Character Must be # or *=Kyù töï Ñaàu tieân Phaûi laø # hay * Sequence Already in Use=Chuoãi hieän Ñang Duøng OK=OK Cancel=Huûy Exit=Thoaùt Apply=AÙp duïng &Apply=AÙp duïng Initializing=Ñang khôûi ñoäng Uninstall=Gôõ caøi ñaët Help=Trôï giuùp Skype Connected=Ñang keát noái Skype Skype Disconnected=Ñaõ ngaét keát noái Skype Adaptor Connected=Ñaõ laép Boä ñieàu hôïp Adaptor Disconnected=Ñaõ thaùo Boä ñieàu hôïp Line and phone cables are reversed!=Ñöôøng daây vaø caùp ñieän thoaïi bò ñaûo ngöôïc! Failed to run TLinkMonitor=Loãi khoâng theå chaïy TLinkMonitor Invalid value=Giaù trò sai Empty field not allowed=Khoâng theå ñeå troáng tröôøng noäi dung Invalid second character=Kyù töï thöù hai khoâng hôïp leä Second character must be a digit=Kyù töï thöù hai phaûi laø kyù töï soá General Settings=Caùc thoâng soá caøi ñaët Thoâng thöôøng Personal VoIP Gateway (Beta)=Coång giao tieáp VoIP Caù nhaân (baûn Beta) Close=Ñoùng laïi Configure=Caáu hình About=Thoâng tin Version=Phieân baûn Copyright=Baûn quyeàn Personal VoIP Gateway=Coång giao tieáp VoIP Caù nhaân Disabled=Ñaõ taét Configuration=Caáu hình This will remove Personal VoIP Adaptor from your computer=Vieäc naøy seõ thaùo caøi Boä ñieàu hôïp VoIP Caù nhaân khoûi maùy tính cuûa baïn This will install Personal VoIP Adaptor to your computer=Vieäc naøy seõ giuùp caøi Boä ñieàu hôïp VoIP Caù nhaân vaøo maùy tính cuûa baïn Would you like to proceed=Baïn muoán thöïc hieän Please Plug In your Personal VoIP Gateway Device=Vui loøng Laép Thieát bò Coång giao tieáp Caù nhaân VoIP Setup=Caøi ñaët Pin number=Soá Pin Switch to Call Forward after=Chuyeån sang cheá ñoä Chuyeån tieáp Cuoäc goïi sau sec=giaây Toll Bypass=Khoâng Reo Chuoâng Enable Call Forward=Baät cheá ñoä Chuyeån tieáp Cuoäc goïi Enable Toll Bypass=Baät cheá ñoä Khoâng Reo Chuoâng Connected=Ñaõ keát noái Disconnected=Ñaõ ngöng noái Quit=Thoaùt Pin number should have 4 to 8 digits in length=Soá Pin phaûi coù chieàu daøi töø 4 ñeán 8 kyù töï Pin number=Soá Pin Terms and Conditions=Ñieàu khoaûn vaø Ñieàu kieän I have read and agree to the terms and conditions as stated above=Toâi ñaõ xem vaø ñoàng yù vôùi caùc ñieàu khoaûn vaø ñieàu kieän neâu treân I agree=Toâi ñoàng yù End User License Agreement=Thoûa thuaän Caáp pheùp cho Ngöôøi söû duïng Error=Loãi Personal VoIP Gateway Device is Not Present=Khoâng tìm thaáy coù thieát bò Coång giao tieáp VoIP Caù nhaân This will remove=Vieäc naøy seõ giuùp thaùo This will install=Vieäc naøy seõ giuùp caøi ñaët from your computer=töø maùy tính cuûa baïn to your computer=vaøo maùy tính cuûa baïn Please Plug In your=Vui loøng Laép vaøo Device=Thieát bò Select the soft phone client you wish to work with=Choïn chöông trình phaàn meàm ñieän thoaïi baïn muoán duøng Soft Phone Type=Loaïi Ñieän thoaïi Phaàn meàm Your Skype version is old, please update Skype version=Phieân baûn Skype cuûa baïn ñaõ cuõ, vui loøng caäp nhaät phieân baûn Skype Push the button back to disable the help=Nhaán nuùt quay veà ñeå taét cheá ñoä trôï giuùp Move the cursor through the window to get help=Di chuyeån con troû qua cöûa soå ñeå ñöôïc trôï giuùp theâm Configuration Utility=Coâng cuï Caáu hình Skype To Phone Line=VoIP Sang Ñieän thoaïi Phone Line To Skype=Ñieän thoaïi sang VoIP Initiate Skype Call=Baét ñaàu Cuoäc goïi Skype Disable Standby/Hibernate=Taét Cheá ñoä Chôø/Nguû ñoâng Active TLink Session - Power state change request denied!=Phieân Hoaït ñoäng TLink – Töø choái yeâu caàu thay ñoåi traïng thaùi naêng löôïng! To insure proper functionality please update Skype version=Ñeå ñaûm baûo chöùc naêng vaän haønh, vui loøng caäp nhaät phieân baûn Skype Call Recorder=Boä ghi aâm Cuoäc goïi Location=Vò trí Open Folder=Môû thö muïc Automation=Töï ñoäng Inactive=Ko hoaït ñoäng Record next call=Ghi aâm cuoäc goïi keá tieáp Record all calls=Ghi aâm taát caû cuoäc goïi Record pass-through calls=Ghi aâm taát caû cuoäc goïi ñaõ goïi Manual Control=Kieåm soaùt Thuû coâng Power Management=Quaûn lyù Naêng löôïng Control Keys=Phím Ñieàu Khieån Start Recording=Baét ñaàu Ghi aâm Stop Recording=Döøng Ghi aâm General settings=Caùc thoâng soá caøi ñaët thoâng thöôøng &Initiate VoIP call:=Baét ñaàu Cuoäc goïi VoIP: Initiate VoIP call:=Baét ñaàu Cuoäc goïi VoIP: &Send key:=Phím göûi: Send key:=Phím göûi: Call &waiting sequence:=Chuoãi Cuoäc goïi Chôø: Call waiting sequence:=Chuoãi cuoäc goïi Chôø: &Conference key sequence:=Chuoãi phím goïi hoäi nghò: Conference key sequence:=Chuoãi phím goïi hoäi nghò: Popup Skype window=Cöûa soå Skype Popup &Restore defaults=Khoâi phuïc maëc ñònh Restore defaults=Khoâi phuïc maëc ñònh Call forward settings=Caøi ñaët chuyeån tieáp cuoäc goïi Call forwarding=Ñang chuyeån tieáp cuoäc goïi VoIP to phone line=VoIP sang ñieän thoaïi &Rings before forwarding:=Reo tröôùc khi chuyeån tieáp: Rings before forwarding:=Reo tröôùc khi chuyeån tieáp: &Number to dial:=Soá saép goïi: Number to dial:=Soá saép goïi: Phone line to VoIP=Ñieän thoaïi sang VoIP Empty number not allowed=Khoâng theå ñeå troáng soá Only digits allowed=Chæ cho ñieàn soá Sequence already in use=Chuoãi hieän ñang duøng TLink Agent configuration=Caáu hình Tlink Agent E&xit=Thoaùt Exit=Thoaùt Skype connected=Ñang keát noái Skype Skype disconnected=Ñaõ ngaét keát noái Skype Adaptor connected=Ñaõ laép boä ñieàu hôïp Adaptor disconnected=Ñaõ thaùo boä ñieàu hôïp &Configure=Caáu hình configuration=caáu hình Please plug in your Personal VoIP Gateway Device=Vui loøng laép Thieát bò Coång giao tieáp Caù nhaân VoIP This will install Personal VoIP Adaptor on your computer=Vieäc naøy seõ giuùp caøi Boä ñieàu hôïp VoIP Caù nhaân vaøo maùy tính cuûa baïn &Pin number:=Soá Pin: &Switch to call forward after:=Chuyeån sang cheá ñoä chuyeån tieáp cuoäc goïi sau: Switch to call forward after:=Chuyeån sang cheá ñoä chuyeån tieáp cuoäc goïi sau: Toll bypass=Khoâng reo chuoâng &Call forward=Goïi chuyeån tieáp Call forward=Goïi chuyeån tieáp &Toll bypass=Khoâng reo chuoâng Toll bypass=Khoâng reo chuoâng Agree=Ñoàng yù End user license agreement=Thoûa thuaän caáp pheùp cho ngöôøi söû duïng Personal VoIP gateway device is not present=Khoâng tìm thaáy coù thieát bò Coång giao tieáp VoIP caù nhaân on your computer=treân maùy tính cuûa baïn Please plug in your=Vui loøng laép vaøo Soft &phone type:=Loaïi ñieän thoaïi phaàn meàm: Soft phone type:=Loaïi ñieän thoaïi phaàn meàm: Configuration utility=Coâng cuï caáu hình Skype to phone line=VoIP sang ñieän thoaïi Phone line to Skype=Ñieän thoaïi sang VoIP Initiate Skype call=Baét ñaàu cuoäc goïi Skype Disable standby/hibernate=Taét cheá ñoä chôø/nguû ñoâng Active session - power state change request denied!=Phieân hoaït ñoäng – töø choái yeâu caàu thay ñoåi traïng thaùi naêng löôïng! Call recorder=Ghi aâm cuoäc goïi &Open folder=Môû thö muïc Open folder=Môû thö muïc &Inactive=Khoâng hoaït ñoäng Record &next call=Ghi aâm cuoäc goïi keá tieáp Record next call=Ghi aâm cuoäc goïi keá tieáp Record &all calls=Ghi aâm taát caû cuoäc goïi Record all calls=Ghi aâm taát caû cuoäc goïi Manual control=Kieåm soaùt thuû coâng Power management=Quaûn lyù naêng löôïng Control keys=Phím ñieàu khieån &Start recording:=Baét ñaàu ghi aâm: Start recording:=Baét ñaàu ghi aâm: S&top recording:=Döøng ghi aâm: Stop recording:=Döøng ghi aâm: Call &forward=Goïi chuyeån tieáp Call forward=Goïi chuyeån tieáp Toll &bypass=Khoâng reo chuoâng Toll bypass=Khoâng reo chuoâng R&ings before forwarding:=Reo tröôùc khi chuyeån tieáp: Rings before forwarding:=Reo tröôùc khi chuyeån tieáp: N&umber to dial:=Soá seõ goïi: Number to dial:=Soá saép goïi: Destination folder=Thö muïc goác Browse=Trình duyeät Br&owse=Duyeät and press OK=vaø nhaán OK Please plug in your Personal VoIP Gateway and press OK=Vui loøng laép Coång giao tieáp Caù nhaân VoIP vaø nhaán OK Do you want to continue?=Baïn coù muoán tieáp tuïc &Disable standby/hibernate=Taét cheá ñoä chôø/nguû ñoâng B&rowse=Duyeät Choose a directory in which you wish to install the software=Choïn thö muïc baïn muoán caøi ñaët phaàn meàm vaøo &Browse=Duyeät Please enter valid folder name=Vui loøng ñieàn teân thö muïc hôïp leä Initiate Skype call:=Baét ñaàu cuoäc goïi Skype: Pin number:=Soá Pin: Call handling=Quaûn lyù cuoäc goïi Incoming Internet calls=Cuoäc goïi ñeán qua Internet Incoming PSTN calls=Cuoäc goïi ñeán qua PSTN Just ring handset=Chæ reo chuoâng ñieän thoaïi &Just ring handset=&Chæ reo chuoâng ñieän thoaïi J&ust ring handset=C&hæ reo chuoâng ñieän thoaïi A&nswering machine=M&aùy traû lôøi töï ñoäng Ans&wering machine=Maùy& traû lôøi töï ñoäng Answering machine=Maùy traû lôøi töï ñoäng to:=ñeán: &Enable administrative mode=&Baät cheá ñoä quaûn trò Enable ad&ministrative mode=Baät ch&eá ñoä quaûn trò Enable administrative mode=Baät cheá ñoä quaûn trò &Rings before response:=&Reo chuoâng tröôùc khi hoài ñaùp: R&ings before response:=R&eo chuoâng tröôùc khi hoài ñaùp: Administrative mode=Cheá ñoä quaûn trò Remote Access=Truy caäp Töø xa Voice menu language=Ngoân ngöõ menu thoaïi &Language=&Ngoân ngöõ IVR Settings=Thoâng soá caøi ñaët IVR Rings before answering:=Reo chuoâng tröôùc khi traû lôøi: Switch to answering machine:=Chuyeån sang maùy traû lôøi töï ñoäng: Remove all recordings=Xoùa taát caû ñoaïn ghi aâm Device Not Present=Khoâng Coù Thieát Bò No=Khoâng Yes=Coù Advanced=Naâng cao Test=Thöû Ring=Reo &Advanced=&Naâng cao &Test=&Thöû Ring Frequency=Taàn soá Reo Do you want to continue?=Baïn coù muoán tieáp tuïc? VOIP On/Off Hold Sequence=Trình töï Giöõ Baät/Taét VOIP PSTN/VOIP Switch Sequence=Trình töï Chuyeån PSTN/VOIP Default Mode=Cheá ñoä Maëc ñònh &Configure=&Caáu hình About=Thoâng tin veà E&xit=&Thoaùt PC wake-up on incoming PSTN call=Baät maùy PC khi coù cuoäc PSTN goïi ñeán Next=Tieáp theo Back=Trôû veà Finish=Hoaøn thaønh Please wait while the Setup Wizard Installs=Vui loøng ñôïi trong khi Trình höôùng daãn Thieát laäp Caøi ñaët This may take several minutes=Vieäc naøy coù theå maát vaøi phuùt Status=Traïng thaùi Setup wizard was interrupted=Trình höôùng daãn caøi ñaët ñaõ bò giaùn ñoaïn Click the Finish button to exit the Setup Wizard=Nhaáp nuùt Hoaøn thaønh ñeå thoaùt khoûi Trình höôùng daãn Caøi ñaët Minimal disk space:=Khoaûng troáng ñóa toái thieåu MB, before auto stop=Soá MB tröôùc khi töï ñoäng döøng MB (MegaBites)=MB (MegaBites) choose a default mode for the device VoIP or regular call=choïn moät cheá ñoä maëc ñònh cho thieát bò VoIP hay goïi thoâng thöôøng Choose the device default mode on off-hook: PSTN or VoIP=Choïn moät cheá ñoä maëc ñònh cho thieát bò khi ngoaïi tuyeán: PSTN hay VoIP Wake-up on incoming PSTN call=Thöùc daäy khi coù cuoäc goïi PSTN ñeán Limit exceeds available disk space. Please select lower value=Vöôït quaù khoaûng troáng treân ñóa. Xin choïn moät giaù trò thaáp hôn Minimum free disk space [MB] for enabling recording:=Khoaûng troáng [MB] toái thieåu treân ñóa ñeå kích hoaït vieäc ghi: Please run Setup.exe to install this product=Xin chaïy Setup.exe ñeå caøi ñaët saûn phaåm naøy You need administrator privileges to install this product=Baïn caàn ñaëc quyeàn cuûa ngöôøi quaûn lyù ñeå caøi ñaët saûn phaåm naøy This product can only be installed on Windows 2000 and above=Saûn phaåm naøy chæ coù theå ñöôïc caøi ñaët treân Windows 2000 hay môùi hôn Fatal Error=Loãi Naëng Warning=Caûnh baùo Info=Thoâng tin Accept=Chaáp thuaän Reject=Töø choái Launch Application when setup finishes=Khôûi chaïy ÖÙng duïng khi keát thuùc caøi ñaët Completing the [ProductName] [Wizard]=Ñang hoaøn taát [ProductName] [Wizard] Gathering required information….=Ñang thu thaäp thoâng tin caàn thieát…. Product name=Teân saûn phaåm Wizard=Thuaät só Welcome to the [ProductName] [Wizard]=Chaøo möøng ñeán vôùi [ProductName] [Wizard] The [Wizard] will install [ProductName] on your computer. Click Next to continue or Cancel to exit the [Wizard]=[Wizard] seõ caøi ñaët [ProductName] vaøo maùy tính cuûa baïn. Nhaáp vaøo Keá tieáp ñeå tieáp tuïc hay Huûy ñeå ra khoûi [Wizard] Please wait while the installer finishes determining your disk space requirements.=Xin chôø trong khi trình caøi ñaët hoaøn taát vieäc xaùc ñònh yeâu caàu khoaûng troáng treân ñóa cuûa baïn. You have chosen to remove the program from your computer.=Baïn ñaõ choïn gôõ boû chöông trình khoûi maùy tính cuûa baïn. Remove user recordings=Gôõ boû caùc ghi cheùp veà ngöôøi söû duïng Ready to Install=Saün saøng Caøi ñaët The [Wizard] is ready to begin the [InstallMode] installation=[Wizard] ñaõ saün saøng baét ñaàu vieäc caøi ñaët [InstallMode] Click Install to begin the installation. If you want to review or change any of your installation settings, click Back. Click Cancel to exit the wizard.=Nhaáp vaøo Caøi ñaët ñeå baét ñaàu caøi ñaët. Neáu baïn muoán xem laïi hay thay ñoåi caùc thieát laäp caøi ñaët, nhaáp vaøo Trôû laïi. Nhaáp vaøo Huûy ñeå ra khoûi thuaät só. Resuming the [ProductName] [Wizard]=Tieáp tuïc laïi [ProductName] [Wizard] The [Wizard] will complete the installation of [ProductName] on your computer. Click Install to continue or Cancel to exit the [Wizard].=[Wizard] seõ hoaøn taát vieäc caøi ñaët [ProductName] treân maùy tính cuûa baïn. Nhaáp vaøo Caøi ñaët ñeå tieáp tuïc hay Huûy ñeå ra khoûi [Wizard]. Disk space required for the installation exceeds available disk space.=Khoaûng troáng caàn cho vieäc caøi ñaët vöôït quaù khoaûng troáng hieän coù treân ñóa. Please read the following license agreement carefully=Xin ñoïc kyõ thoaû thuaän giaáy pheùp döôùi ñaây Installer Information=Thoâng tin veà Trình Caøi ñaët Information text=Vaên baûn thoâng tin Customize Setup=Tuøy chænh Caøi ñaët Select the application target folder=Choïn thö muïc ñích öùng duïng Location:=Ñòa ñieåm: Are you sure you want to cancel [ProductName] installation?=Baïn coù chaéc laø muoán huûy vieäc caøi ñaët [ProductName] khoâng? Look in:=Xem ôû: Browse to the destination folder=Duyeät thö muïc ñeán Change current destination folder=Thay ñoåi thö muïc ñeán hieän thôøi Folder name=Teân Thö muïc Create A New Folder=Taïo moät Thö muïc môùi Up One Level=Leân Moät Caáp Click the Finish button to exit the [Wizard].=Nhaáp vaøo nuùt Hoaøn taát ñeå ra khoûi [Wizard]. Please wait while the [Wizard] [Progress2] [ProductName]. This may take several minutes.=Xin chôø trong khi [Wizard] [Progress2] [ProductName]. Vieäc naøy coù theå maát vaøi phuùt. Status:=Tình traïng: Please wait while the [Wizard] prepares to guide you through the installation.=Xin chôø trong khi [Wizard] chuaån bò höôùng daãn baïn vieäc caøi ñaët. Starting services=Khôûi ñoäng dòch vuï Stopping services=Ngöøng dòch vuï Allocating registry space=Chæ ñònh khoaûng troáng ñaêng kyù Searching for installed applications=Tìm caùc öùng duïng ñaõ caøi ñaët Computing space requirements=Ñang tính toaùn yeâu caàu veà khoaûng troáng Validating install=Xaùc nhaän tính hôïp leä caøi ñaët Unpublishing product information=Khoâng coâng boá thoâng tin saûn phaåm Advertising application=Quaûng caùo öùng duïng Initializing ODBC directories=Khôûi chaïy caùc thö muïc ODBC Searching for qualifying products=Tìm caùc saûn phaåm ñuû tieâu chuaån Removing ODBC components=Gôõ boû caùc thaønh phaàn ODBC Updating component registration=Caäp nhaät vieäc ñaêng kyù thaønh phaàn Evaluating launch conditions=Ñaùnh giaù caùc ñieàu kieän khôûi chaïy Installing ODBC components=Caøi ñaët caùc thaønh phaàn ODBC Searching for qualifying products=Tìm caùc saûn phaåm ñuû tieâu chuaån Publishing product information=Coâng boá thoâng tin saûn phaåm Binding executables=Lieân keát caùc khaû naêng thöïc hieän Creating folders=Taïo caùc thö muïc Creating shortcuts=Taïo caùc loái taét Deleting services=Xoùa dòch vuï Creating duplicate files=Taïo caùc taäp tin sao y Searching for related applications=Tìm caùc öùng duïng coù lieân quan Generating script operations for action:=Taïo thao taùc chöõ vieát cho haønh ñoäng: Copying network install files=Sao cheùp caùc taäp tin caøi ñaët maïng Copying new files=Sao cheùp caùc taäp tin môùi Installing new services=Caøi ñaët caùc dòch vuï môùi Installing system catalog=Caøi ñaët danh muïc heä thoáng Migrating feature states from related applications=Chuyeån höôùng caùc tình traïng tính naêng töø caùc öùng duïng coù lieân quan Moving files=Chuyeån caùc taäp tin Publishing assembly information=Coâng boá thoâng tin keát caáu Unpublishing assembly information=Khoâng coâng boá thoâng tin keát caáu Patching files=Vaù caùc taäp tin Publishing Qualified Components=Coâng boá caùc Thaønh phaàn ñuû Tieâu chuaån Publishing Product Features=Coâng boá caùc Tính naêng Saûn phaåmDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.