CoachDc.inf Driver File Contents (ISDV2.zip)

;
; CoachDc.inf
; USB Class Driver for Digital Camera with Coach Chipset
; Windows 98, 2000
; Copyright (C) 2004, FotoNation
;

; ===================== Version section =======================

[Version]
Signature="$CHICAGO$"
Class=Image
ClassGUID={6bdd1fc6-810f-11d0-bec7-08002be2092f}
Provider=%Provider%
LayoutFile=layout.inf
;CatalogFile=CoachDc.cat  ;//2004/12/02 Marked by Terry
DriverVer=11/24/2004, 4.61.0.0

; ====================== Files section ========================

[SourceDisksNames]
;1=%InstallDisk% ; this doesn't work on win98
1=%InstallDisk%,,,

[SourceDisksFiles]
CoachUsb.sys=1
CoachWrp.dll=1
;CoachSti.dll=1  ;//2004/12/02 Marked by Terry
;CoachWia.dll=1  ;//2004/12/02 Marked by Terry
;GdiPlus.dll=1  ;//2004/12/02 Marked by Terry
CoachTW.ds=1
CoachTW.dll=1

[DestinationDirs]
Files.Sys = 10,System32\Drivers
Files.Dll = 11
;Files.Wia = 11  ;//2004/12/02 Marked by Terry
;Files.Sti = 11  ;//2004/12/02 Marked by Terry
;Files.Gdi = 11  ;//2004/12/02 Marked by Terry
Files.Ds = 10,TWAIN_32\CoachTW

[Files.Sys]
;CoachUsb.sys  ;//2004/12/02 Marked by Terry

[Files.Dll]
;CoachWrp.dll  ;//2004/12/02 Marked by Terry

[Files.Wia]
;CoachWia.dll  ;//2004/12/02 Marked by Terry

[Files.Sti]
;CoachSti.dll  ;//2004/12/02 Marked by Terry

[Files.Gdi]
;GdiPlus.dll  ;//2004/12/02 Marked by Terry

[Files.Ds]
;CoachTW.ds  ;//2004/12/02 Marked by Terry
;CoachTW.dll  ;//2004/12/02 Marked by Terry

; ================== Manufacturer & Models section ============

[Manufacturer]
%Mfg.Desc% = Models

[Models]
;%CamUsb.DevDesc% = CamUsb, USB\VID_0595&PID_4343  ;//2004/12/02 Modified by Terry
%CamUsb.DevDesc% = CamUsb, USB\VID_08CA&PID_2102


; ================== Win9x Device Install section =============

[CamUsb]
CopyFiles = Files.Sys,Files.Dll,Files.Sti,Files.Ds
AddReg = CamUsb.AddReg, CamUsb.W9x.AddReg

SubClass = StillImage
DeviceData = CamUsb.DeviceData
;UninstallSection = CamUsb.Uninstall
ICMProfiles = "sRGB Color Space Profile.icm"
;
; Device type
; 1 = scanner
; 2 = camera
; 3 = video
DeviceType=2
;
; Capabilities is a mask:
; 0x01 = Device generates events
; 0x02 = Polling needed
; 0x04 = Generate event when device installed
; 0x08 = Enable the "auto" port option
; 0x10 = WIA capable driver
; 0x20 = Driver has reduced functionality
Capabilities=0x00000005
;
; Hides port selection page in the wizard and on the
; device property sheet.
PortSelect=No

[CamUsb.W9x.AddReg]
HKR,,DevLoader,,*ntkern
HKR,,NTMPDriver,,CoachUsb.sys

; ================== WinNT Device Install section =============

[CamUsb.NT]
CopyFiles = Files.Sys,Files.Dll,Files.Sti,Files.Ds
AddReg = CamUsb.AddReg

; CopyINF works only for XP and later
CopyINF = CoachVc.inf
CopyINF = CoachAud.inf

SubClass = StillImage
DeviceData = CamUsb.DeviceData
;UninstallSection = CamUsb.Uninstall
ICMProfiles = "sRGB Color Space Profile.icm"
;
; Device type
; 1 = scanner
; 2 = camera
; 3 = video
DeviceType=2
;
; Capabilities is a mask:
; 0x01 = Device generates events
; 0x02 = Polling needed
; 0x04 = Generate event when device installed
; 0x08 = Enable the "auto" port option
; 0x10 = WIA capable driver
; 0x20 = Driver has reduced functionality
Capabilities=0x00000005
;
; Hides port selection page in the wizard and on the
; device property sheet.
PortSelect=No

[CamUsb.NT.Services]
AddService = %CamUsb.SvcName%,%SPSVCINST_ASSOCSERVICE%,CamUsb.NT.AddService,CamUsb.NT.EventLog

[CamUsb.NT.AddService]
DisplayName = %CamUsb.SvcDesc%
ServiceType = %SERVICE_KERNEL_DRIVER%
StartType = %SERVICE_DEMAND_START%
ErrorControl = %SERVICE_ERROR_NORMAL%
ServiceBinary = %12%\CoachUsb.sys

[CamUsb.NT.EventLog]
AddReg = CamUsb.NT.EventLog.AddReg

[CamUsb.NT.EventLog.AddReg]
HKR,,EventMessageFile,%REG_EXPAND_SZ%,"%%SystemRoot%%\System32\drivers\CoachUsb.sys"
HKR,,TypesSupported,%REG_DWORD%,7

; ================= Common Device Install section =============

[CamUsb.AddReg]

HKR,Parameters,EnableStill,0x00010001,1
HKR,Parameters,EnableVC,0x00010001,1
HKR,Parameters,EnableAudio,0x00010001,1

; CompressionRatio, valid range 10 .. 170
; This will configure the compression ratio for a new
; still image to be captured with.
; 10 means ratio=1.0, 45 means ratio=4.5 ...
HKR,Parameters,CompressionRatio,0x00010001,75

; PreCaptureInterval, valid range 0 .. 30000 (milliseconds)
; This will configure the pre capture delay for still image.
HKR,Parameters,PreCaptureInterval,0x00010001,2500

; CaptureSaveTimeout, valid range 5000 .. 30000 (milliseconds)
; Maximum time allowed to save the image during still capture.
HKR,Parameters,CaptureSaveTimeout,0x00010001,15000

; EnableWB, enable white balance control during still capture.
; 0 - disable
; 1 - enable
HKR,Parameters,EnableWB,0x00010001,1

; EnableI43ExclusiveMode enable Exclusive mode for I43 Interface.
; 0 - disable (used only for chipset test)
; 1 - enable (for normal usage)
HKR,Parameters,EnableI43ExclusiveMode,0x00010001,1

; StartupIdleMode, for chipset testing. Do NOT change!
HKR,Parameters,StartupIdleMode,0x00010001,0

; MinViewEvttEntry, valid range 0 .. MaxViewEvttEntry
; The minimal index in EVTT table that corresponds to maximal brightenss
HKR,Parameters,MinViewEvttEntry,0x00010001,0

; MaxViewEvttEntry, valid range MinViewEvttEntry .. 127
; The maximal index in EVTT table that corresponds to minimal brightenss
HKR,Parameters,MaxViewEvttEntry,0x00010001,127

; VideoExposureDeviation, valid range 0 .. 31
; This will configure the video autobrightness.
HKR,Parameters,VideoExposureDeviation,0x00010001,15

; VideoCompressionRatio, valid range 10 .. 170
; This will configure the default compression ratio of video stream.
; 10 means ratio=1.0, 45 means ratio=4.5 ...
HKR,Parameters,VideoCompressionRatio,0x00010001,75

; VideoEdgeEnhancement, valid range 0 .. 255
; This will configure the edge enhancement of video stream.
HKR,Parameters,VideoEdgeEnhancement,0x00010001,2

; FrameRate, valid range 1 .. 200 (frames per second)
; Should be defined for each video mode.
; If video mode not present then ignored.
HKR,Parameters\VideoModes\0,FrameRate,0x00010001,22
HKR,Parameters\VideoModes\1,FrameRate,0x00010001,30
HKR,Parameters\VideoModes\2,FrameRate,0x00010001,10
HKR,Parameters\VideoModes\3,FrameRate,0x00010001,0
HKR,Parameters\VideoModes\4,FrameRate,0x00010001,0

; MinFrameRate, valid range 1 .. FrameRate (frames per second)
; Should be defined for each video mode.
; If video mode not present then ignored.
HKR,Parameters\VideoModes\0,MinFrameRate,0x00010001,1
HKR,Parameters\VideoModes\1,MinFrameRate,0x00010001,1
HKR,Parameters\VideoModes\2,MinFrameRate,0x00010001,1
HKR,Parameters\VideoModes\3,MinFrameRate,0x00010001,1
HKR,Parameters\VideoModes\4,MinFrameRate,0x00010001,1

;
; HardwareConfig entry indicates what type of connection
; the device uses. First number should always be 1. The
; second number varies: 1=unknown, 2=SCSI, 4=USB,
; 8=serial, 16=parallel
HKR,,HardwareConfig,1,1
;
; The GUID in the following entries must match the class ID
; of the STI/WIA minidriver
;//2004/10/04 Marked by Terry, Begin
;HKR,,USDClass,,"{84E06DEF-C533-4534-9B06-4767ACF70C0E}"
;HKCR,CLSID\{84E06DEF-C533-4534-9B06-4767ACF70C0E},,,"Camera STI Minidriver"
;HKCR,CLSID\{84E06DEF-C533-4534-9B06-4767ACF70C0E}\InProcServer32,,,%11%\CoachSti.dll
;HKCR,CLSID\{84E06DEF-C533-4534-9B06-4767ACF70C0E}\InProcServer32,ThreadingModel,,Both
;//2004/10/04 Marked by Terry, End


[CamUsb.DeviceData]
Server=local
;
; Indicates COM component to load for UI.
; Use {4DB1AD10-3391-11D2-9A33-00C04FA36145} for
; default WIA UI.
UI Class ID={4DB1AD10-3391-11D2-9A33-00C04FA36145}
;
; The DLL that gives access to the device.
LowerDll=CoachWrp.dll

; ==================== String macro section ===================

[Strings]

; ======== Handy macro substitutions (non-localizable) ========

; Service Type 
SERVICE_KERNEL_DRIVER = 0x1
SERVICE_FILE_SYSTEM_DRIVER = 0x2
SERVICE_ADAPTER = 0x4

; Driver Start Code
SERVICE_BOOT_START = 0
SERVICE_SYSTEM_START = 1
SERVICE_AUTO_START = 2
SERVICE_DEMAND_START = 3
SERVICE_DISABLED = 4

; Error Control Level
SERVICE_ERROR_IGNORE = 0
SERVICE_ERROR_NORMAL = 1
SERVICE_ERROR_SEVERE = 2
SERVICE_ERROR_CRITICAL = 3

SPSVCINST_ASSOCSERVICE = 0x00000002

; Registry Value Type (don't use on Win 98/ME)
REG_EXPAND_SZ = 0x00020000
REG_DWORD = 0x00010001
REG_MULTI_SZ = 0x00010000

; ======= Private macro substitutions (non-localizable) =======
; Modification of those strings can cause incorrect installation

CamUsb.SvcName = "CoachUsb"
CamUsb.SvcDesc = "Coach Digital Camera on USB"

; ============== Localizable macro substitutions ==============

InstallDisk = "Install disk with drivers"
;Provider = "FotoNation"  ;//2004/12/02 Modified by Terry
;Mfg.Desc = "Zoran"
Provider = " "
Mfg.Desc = " "
CamUsb.DevDesc = "DV Ts(Still)"
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 0.40